beevision 180 Bedienungsanleitung
2
BeeVision 180 User Manual v1.4.0
C
Contents
1 Overview........................................................................................................ 3
2 Installation..................................................................................................... 3
3 Connection Ports ......................................................................................... 5
4 Turning ON/OFF........................................................................................... 6
5 Field of View ................................................................................................. 6
Field of View.........................................................................................................6
6 Communication Interfaces.......................................................................... 8
7 Volumizer ...................................................................................................... 8
8 Operation .....................................................................................................12
Calibration ..........................................................................................................13
9 Technical Drawings ....................................................................................14
BeeVision 180 User Manual v1.4.0
3
1
1 Overview
This document describes the usage of the BeeVisionTM 180 dimensioning and
weighing system.
BeeVision dimensioners are provided with VolumizerTM software that enables
users to easily self-calibrate the device, perform measurements and share
results. Users can use the BeeVision Dimensioners with Volumizer-GUI available
on an attached monitor or with Volumizer-WebUI from their browser on their PC,
tablet or smart-phone. For more details about the Volumizer, please refer to the
Software Guide document.
With Volumizer-API, users can control their dimensioner remotely and integrate
it into their software infrastructure.
BeeVision dimensioners are designed as stand-alone devices. There is no need
to have a PC or install a software to get the results from BeeVision devices.
2
2 Installation
BeeVision 180 static dimensioning system comes with a BeeVision dimensioner,
12’ touch screen, integrated scale and handheld barcode scanner as depicted in
FIGURE 1.
Figure 1: BeeVision 180
4
BeeVision 180 User Manual v1.4.0
Users just need to mount the dimensioner to the base and the can start
measuring. For detailed information on the installation of BeeVision 180, check
out our installation manual.
There is no need for an external monitor, the user can control all device features
on the integrated touch screen.
FIGURE 2: SYSTEM COMPONENTS
The distance between BeeVision 180’s dimensioner and the scale is 150 cm as
depicted in Figure 2. Please refer to the brochure of the BeeVision 180 to find out
more about the dimensioning range.
BeeVision 180 User Manual v1.4.0
5
3
3 Connection Ports
FIGURE 3below shows the connection ports and power switch that are located
on the back of the base scale plate.
FIGURE 3: PORTS AND POWER SWITCH OF THE BEEVISION 180
USB 3.0 port: There is one USB 3.0 port. The handheld barcode scanner is
provided with the BeeVision 180 can be connected to this USB port or can be
used for connecting printer and flash storage devices. If required, users can
connect a USB port.
Ethernet port: To communicate with any computer or server system for the data
transfer.
6
BeeVision 180 User Manual v1.4.0
Power switch: Used for switching on or off the system. When the switch is off,
all components of the system turned off.
Power port: To supply 220V to the device.
Wireless antenna: Antenna, which is mounted on the dimensioner, performs data
transfer by establishing wireless communication with a wireless modem
device/PC.
4
4 Turning ON/OFF
When the power cord is inserted into the power port and given mains voltage,
turn the power switch to on state and the system will be ready for use. The input
mains voltage BeeVision dimensioner must be at an interval between 100V-
240V and 50Hz/60Hz.
To connect the BeeVision dimensioner to a computer or a local network for data
transfer, simply use an Ethernet cable. Please refer to the Software Guide for
more details on how to integrate BeeVision to your system.
The mouse cursor is by default hidden in Volumizer UI. If you would
like to connect a mouse and a keyboard, you can enable/disable
mouse cursor with Ctrl+Shift+M combinations in your keyboard.
To turn off the device, simply unplug the power cord or turn the power switch to
the off state.
5
5 Field of View
Field of View
The field of view of BeeVision is 60x40as illustrated in FIGURE 4. There should
be at least 40 cm distance between the object and the device for proper
measurement operation.
BeeVision 180 User Manual v1.4.0
7
FIGURE 4: HORIZONTAL AND VERTICAL FIELD OF VIEW
The measurement area of the BeeVision 180 dimensioner can be changed
on the calibration page. The measurement area should be in the field of view
of the device. Some parts of irregular objects may remain out of sight of the
device as illustrated in FIGURE 5. Only the surfaces that are visible to the
device are included in measurement calculations.
FIGURE 5: BLIND SPOT ILLUSTRATION
8
BeeVision 180 User Manual v1.4.0
6
6 Communication
Interfaces
Following communication interfaces are supported by BeeVision devices.
•USB interface for connection of barcode scanner, printer or similar
•Serial interface for connection of scale or data transfer to user
computer
•Ethernet interface for communicating over the internet or local
network to a central server of user
7
7Volumizer
Volumizer is the software installed in the BeeVision dimensioners that enables
users to control the device, perform calibration and measurements. It has a
graphical user interface (GUI) that can be used when BeeVision is connected to
a monitor. It also has a web-based user interface (WebUI) that can be accessed
from a browser with the following address: http://IP_address_of_device. Google
Chrome browser is officially supported.
Users can navigate to the pages from the main menu as shown in FIGURE 6and
FIGURE 7.
If you use a different browser than Google Chrome, some functions
may not work as expected.
BeeVision 180 User Manual v1.4.0
9
FIGURE 6: MAIN MENU OF VOLUMIZER GUI
FIGURE 7: VOLUMIZER WEBUI
Following pages are included in Volumizer GUI and WebUI:
Brings up dimensioning submenu
Dimension
Measure
Trigger measurement and display
results
10
BeeVision 180 User Manual v1.4.0
Calibration
Perform calibration and view 3D,
2D and model data
Measurement
Settings
Change measurement settings
Measurement
in Groups
Perform measurements in groups
and save results to a remote
address as an XML file per group
Source
Merge 3D data with a slave,
remote BeeVision device
Brings up barcode decoding
submenu (might be disabled
depending on the model)
Decode
Integration
Change result sharing options
Change Ethernet and Wi-Fi settings
Network Settings
Change system settings such as
language, time, date and device
operation mode
System Settings
Brings up external devices submenu
External Devices
Inhaltsverzeichnis
