Behringer Noise Reducer NR300 Bedienungsanleitung

NOISE REDUCER NR300

Ultimate Noise Reduction Eects Pedal

Thank you for showing your condence in us by purchasing the BEHRINGER NOISE REDUCER NR300.

This ultimate eects pedal is specically designed to eliminate unwanted noise and hum without

altering your tone. Thanks to its high-performance features it preserves the original attack and

envelope while leaving your playing and dynamics intact.

1. Controls

(1) This MODE switch allows you to chose between MUTE and REDUCTION mode. Pressing the

pedal in MUTE mode results in muting the whole input signal, to reduce noises in during pauses

for example. In REDUCTION mode, quiet passages (when noise or hum would get obvious to the

listener) are eectively reduced. Adjustments to threshold and decay settings are necessary

in this case (see below).

(2) Use the THRESH(old) control to dene a level threshold in REDUCTION mode. When the input

signal falls below this value, the unit starts reducing the signal.

(3) The DECAY control determines how fast the signal reduction is released when the input signal

exceeds the threshold value again.

(4) The MUTE/BATT LED illuminates when the eect is activated. It also serves as a battery level indicator.

(5) The REDUCTION LED illuminates when the input level falls below the threshold and

starts getting reduced.

(6) Use the footswitch to activate/deactivate the eect.

(7) Use this ¼" TS IN connector to plug in the instrument cable.

(8) The ¼" TS OUT connector sends the signal to your amp.

(9) Use this ¼" TS SEND connector to connect it to the input of an external eect unit. This way you

can feed in an eect signal while simultaneously eliminating noises from the unit.

(10) The ¼" TS RETURN connector is used to feed in the external eect signal.

(1)

(8)

(9)

(4)

(3)

(5)

(7)

(10)

(6)

(2)

NOISE REDUCER NR300

TECHNICAL SPECIFICATIONS AND APPEARANCES ARE SUBJECT TO CHANGEWITHOUT NOTICE AND ACCURACY IS NOT GUARANTEED. BEHRINGER IS PART OF THE

MUSIC GROUP (MUSIC-GROUP.COM). ALLTRADEMARKS ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. MUSICGROUP ACCEPTS NO LIABILITY FOR ANY LOSS

WHICH MAY BE SUFFERED BY ANY PERSONWHO RELIES EITHER WHOLLY OR IN PART UPON ANY DESCRIPTION, PHOTOGRAPH OR STATEMENT CONTAINED HEREIN.

COLORS AND SPECIFICATIONS MAY VARY FROM ACTUAL PRODUCT. MUSIC GROUP PRODUCTS ARE SOLD THROUGH AUTHORIZED FULLFILLERS AND RESELLERS

ONLY. FULLFILLERSAND RESELLERS ARE NOT AGENTS OF MUSICGROUP AND HAVE ABSOLUTELY NO AUTHORITY TO BIND MUSICGROUP BY ANY EXPRESS OR

IMPLIED UNDERTAKING OR REPRESENTATION. THIS MANUAL IS COPYRIGHTED. NO PART OF THIS MANUAL MAY BE REPRODUCED OR TRANSMITTED IN ANY FORM

OR BY ANY MEANS, ELECTRONIC OR MECHANICAL, INCLUDING PHOTOCOPYING AND RECORDING OF ANY KIND, FOR ANY PURPOSE, WITHOUTTHE EXPRESS

Tortola, British Virgin Islands

Use the DC IN connection to plug in a 9 V power supply (not included).

The BATTERY COMPARTMENT is located underneath the pedal cover. To install or replace the 9 V battery

(not included), press the hinges with a ballpoint pen and remove the pedal cover. Be careful not to

scratch the unit.

◊ The NR300 has no on/o switch. As soon as you insert the jack into the in connector,

the NR300 begins running. When not using the NR300, remove the jack from the in

connector. This extends the life of the battery.

The SERIAL NUMBER is located at the bottom.

2. Safety Instructions

Do not use near water, or install near heat sources. Use only authorized attachments/accessories.

Do not service product yourself. Contact our qualied servicing personnel for servicing or repairs,

especially when power supply cord or plug is damaged.

3. Warranty

Please register your new BEHRINGER equipment right after your purchase by visiting

http://behringer.com and read the terms and conditions of our warranty carefully.

4. Specications

Connector ¼" TS

Impedance 500 kΩ

Out

Connector ¼" TS

Impedance 1 kΩ

Send

Connector ¼" TS

Impedance 1 kΩ

Return

Connector ¼" TS

Impedance 50 kΩ

Power Supply

9 V𝌂, 100 mA regulated

BEHRINGER PSU-SB

USA/Canada 120 V~, 60 Hz

China/Korea 220 V~, 50 Hz

U.K./Australia 240 V~, 50 Hz

Europe 230 V~, 50 Hz

Japan 100 V~, 50 - 60 Hz

Power connector 2 mm DC jack, negative center

Battery 9 V type 6LR61

Power consumption 30 mA

Physical/Weight

Dimensions approx. 2 ⁄ x 2 ¾ x 4 ⁄"

(H x W x D) approx. 54 x 70 x 123 mm

Weight approx. 0.73 lbs / 0.33 kg

BEHRINGER is constantly striving to maintain the

highest professional standards. As a result of these efforts,

modifications may be made from time to time to existing

products without prior notice. Specifications and appearance

may therefore differ from those listed or shown.

Andere Handbücher für Noise Reducer NR300

Inhaltsverzeichnis

Andere Behringer Musikpedal Handbücher

Behringer

Behringer COMPRESSOR SUSTAINER CS100 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer DYNAMIC WAH DW400 Bedienungsanleitung

Behringer

Behringer BASS SYNTHESIZER BSY600 Bedienungsanleitung

Behringer

Behringer CHORUS SPACE-D CD400 Bedienungsanleitung

Behringer

Behringer ULTRA CHORUS UC200 Bedienungsanleitung

Behringer

Behringer Heavy Metal HM300 Bedienungsanleitung

Behringer

Behringer Foot Controller FCV100 Bedienungsanleitung

Behringer

Behringer PB1000 Bedienungsanleitung

Behringer

Behringer HEAVY DISTORTION HD300 Bedienungsanleitung

Behringer

Behringer AM400 Bedienungsanleitung

Behringer

Behringer DIGITAL REVERB DR600 Bedienungsanleitung

Behringer

Behringer HELLBABE HB01 Bedienungsanleitung

Behringer

Behringer COMPRESSOR SUSTAINER CS400 Bedienungsanleitung

Behringer

Behringer BASS OVERDRIVE BOD400 Bedienungsanleitung

Behringer

Behringer ULTRA SHIFTER/HARMONIST US600 Bedienungsanleitung

Behringer

Behringer SUPER PHASE SHIFTER SP400 Bedienungsanleitung

Behringer

Behringer Compressor Sustainer CS100 Bedienungsanleitung

Behringer

Behringer Overdrive/Distortion Bedienungsanleitung

Behringer

Behringer CC300 Bedienungsanleitung

Behringer

Behringer Vintage tube overdrive TO800 Bedienungsanleitung

Behringer

Behringer ULTRA METAL UM300 Bedienungsanleitung

Behringer

Behringer UW300 Bedienungsanleitung

Behringer

Behringer SUPER OCTAVER SO400 Bedienungsanleitung

Beliebte Musikpedal Handbücher anderer Marken

Whirlwind

Whirlwind oc-bass Bedienungsanleitung

Strymon

Strymon Lex-rotary Bedienungsanleitung

Lexicon

Lexicon MX200 Bedienungsanleitung

Dunlop

Dunlop Hendrix 68 Shrine Octavio Fuzz Series Bedienungsanleitung

Matthews Effects

Matthews Effects Whaler V2 Bedienungsanleitung

Grid 1

Grid 1 Pedal Jeanie Bedienungsanleitung

Amptweaker

Amptweaker tightboost Bedienungsanleitung

Ibanez

Ibanez TS-808 Tube Screamer Overdrive Pro Bedienungsanleitung

Dimavery

Dimavery EPVP-50 Bedienungsanleitung

Tefi Vintage Lab

Tefi Vintage Lab GEGÈ Bedienungsanleitung

Pro-MIDI

Pro-MIDI G25 Bedienungsanleitung

DW 7000 Bedienungsanleitung

FAMC

FAMC Liquid-Foot Jr. Series Bedienungsanleitung

Dimavery

Dimavery EPOD-50 Overdrive Bedienungsanleitung

TREX

TREX ToneBug Totenschläger Bedienungsanleitung

BBE

BBE ORANGE SQUASH Bedienungsanleitung

Tube Works

Tube Works 310 Bedienungsanleitung

EarthQuaker Devices

EarthQuaker Devices Tentacle Bedienungsanleitung