Belkin F5D7010 Bedienungsanleitung

User Manual

F5D7010

Belkin Corporation

501 West Walnut Street

Compton • CA • 90220 • USA

Tel: 310.898.1100

Fax: 310.898.1111

Belkin Components, Ltd.

Express Business Park

Shipton Way • Rushden • NN10 6GL

United Kingdom

Tel: +44 (0) 1933 35 2000

Fax: +44 (0) 1933 31 2000

Belkin Components B.V.

Starparc Building • Boeing Avenue 333

1119 PH Schiphol-Rijk • The Netherlands

Tel: +31 (0) 20 654 7300

Fax: +31 (0) 20 654 7349

Belkin, Ltd.

7 Bowen Crescent • West Gosford

NSW 2250 • Australia

Tel: +61 (0) 2 4372 8600

Fax: +61 (0) 2 4372 8603

Belkin Tech Support

US: 310.898.1100 ext. 2263

800.223.5546 ext. 2263

Europe: 00 800 223 55 460

Australia: 1800 666 040

P74217

registered trademarks of respective manufacturers listed.

belkin.com

54g Wireless Notebook

Network Card

Share your broadband Internet

connection and files

TABLE OF CONTENTS

INTRODUCTION

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Applications and Advantages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Product Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Knowing your Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Installing and Setting Up the Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Software and Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Connecting to your Wireless Network . . . . . . . . . . . . . . . . . . . . . . . . .12

Uninstalling the Software and Drivers . . . . . . . . . . . . . . . . . . . . . . . .12

Using the Belkin Wireless LAN Configuration Utility . . . . . . . . . . . . . . . . . .13

The Wireless Networks Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Encryption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

The Link Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

The Site Survey Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Diagnostics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Thank you for purchasing the Belkin 54g Wireless Notebook Network Card (the

Card). Now you can take advantage of this great new technology and gain the

freedom you need around the home or office without using cables. The Wireless

Notebook Network Card works like a conventional network card, but without the

wires. The easy installation and setup will have you networking wirelessly in

minutes. Please be sure to read through this manual completely to be sure that

you are getting the most out of your Wireless Notebook Network Card.

O ER IEW

Applications and Advantages

• Wireless roaming with a laptop around the home or office

Offers the freedom of networking without cables.

• Connection rates of up to 54Mbps

Provides immediate, higher-speed wireless connectivity at home, work, and hot

spot locations without compromising the use of existing 802.11b products.

• Compatibility with 802.11b products

54g wireless LAN solutions are backward-compatible with existing Wi-Fi (IEEE

802.11b) products and with other products that display the 54g mark.

• Difficult-to-wire environments

Enables networking in buildings with solid or finished walls, or open areas

where wiring is difficult to install.

• Frequently changing environments

Adapts easily in offices or environments that frequently rearrange or

change locations.

• Temporary LANs for special projects or peak time

Sets up temporary networks such as at trade shows, exhibitions, and

constructions sites, which need networks on a short-term basis; also

companies who need additional workstations for a peak activity period.

• SOHO (Small Office/Home Office) networking needs

Provides the easy and quick, small network installation SOHO users need.

O ER IEW

Features

The Card complies with the IEEE 802.11b standard in order to communicate with

other 802.11b-compliant wireless devices at 11Mbps as well as other 54g

products at 54Mbps that have the 54g™ badge on the package.

54g products run at speeds of up to 54Mbps and operate on the same 2.4GHz

frequency band as 802.11b Wi-Fi products.

• 2.4GHz ISM (Industrial, Science, and Medical) band operation

• Integrated easy-to-use Wireless Configuration Utility

• Wireless interface compliance with the IEEE 802.11b standard and 54g

products

• PCMCIA interface, for operation in virtually any notebook computer

• 64 or 128-bit Wireless (WEP) Encryption

• Wireless access to networked resources

• Support for both Infrastructure and Ad-Hoc (peer-to-peer) networking modes

• Data rate of up to 54Mbps

o Supports 11, 5.5, 2 or 1Mbps rates (802.11b)

o Supports 54, 48, 36, 24, 18, 12, 9, or 6Mbps rates (54g)

• Easy installation and use

• Internal antenna

• LED power and network link indicators

KNOWING YOUR CARD

(a) Power LED

When the Card receives power, this light will be on.

(b) Link LED

When the Card has a link to a wireless network, the light will be solid.

When not linked to a wireless network, the light will slowly flash.

This is the side of the Card that fits into the PCMCIA slot of your laptop

(d) Antenna

O ER IEW

Product Specifications

Host Interface: 32-bit CardBus

Power Consumption: Tx/Rx peak 550/350mA @ 3.3VDC (max.)

Certification: FCC Class B, CE Mark, C-Tick

Operating Temperature: (0–85 degrees C)

Storage Temperature: (-40–90 degrees C)

Humidity: Max. 95% (non-condensing)

Typical Operating Range: 802.11b: 590.6 ft. (180m) @ 11Mbps,

984.3 ft. (300m) @ 5.5 Mbps or lower

54g: 164 ft. (50m) @ 54Mbps,

492.1 ft. (150m) @ 18Mbps

System Requirements

• PC-compatible laptop with one available PCMCIA slot

• Windows® 98, 2000, Me, XP

Package Contents

• Belkin 54g Wireless Notebook Network Card

• Quick Installation Guide

• Installation Software CD

• User Manual

(c)

(a)

(d)

(b)

Installing your Card is done in three easy steps.

1. Install the software FIRST. If you plug your Card into your laptop before you

install the software, it will not work.

2. Plug the Card into your laptop.

3. Let Windows operating system finish installing the Card.

Note: Install the software first before you install the card into your notebook.

Software and Driver Installation

1. Insert the CD into your CD-ROM drive.

2. The Belkin Wireless Notebook Network Card Setup Utility screen will

automatically appear. If it does not appear within 15-20 seconds, then

select your CD-ROM drive and double-click on the folder named “Files”. Next

double-click on the icon named “F5D7010W_UTILITY.exe”.

3. In the menu window, drag your mouse over the “Install” button then select

“Click here” to start the software installation program.

INSTALLING AND SETTING UP THE CARD

4. The installer will start. If you are using Windows XP, it is recommended that

you use the Belkin Wireless Notebook Network Card Utility to manage the

Card’s wireless settings. If you want to use Windows XP to manage the Card,

check “Use the Windows XP Wireless Network Connection Utility”. Instructions

on how to use Windows XP’s Connection Utility are available from Microsoft.

Click “Next” to continue.

5. Accept the Belkin Software License Agreement by clicking the “YES” button.

INSTALLING AND SETTING UP THE CARD

6 7

INSTALLING AND SETTING UP THE CARD

8. After the software installation is complete, click “Finish”. You are now ready to

install the Wireless LAN notebook adapter hardware.

9. After connecting your Card, Windows will detect that new hardware has been

installed. Depending on which version of Windows you are using, a window

similar to the one pictured below will appear. Select the option that will

automatically install the software.

INSTALLING AND SETTING UP THE CARD

6. Select a folder where you would like to install the program files. It is

recommended that you use the default folder “C:\Program Files\Belkin\Belkin

54Mbps Wireless Utility\”. Click “Next” to install the files.

7. During the install process, you will be prompted to insert your Card. Insert the

Card, label side UP, into your computer’s PCMCIA slot firmly until it stops. The

power light on the top will turn on when it is inserted properly.

8 9

INSTALLING AND SETTING UP THE CARD

12. When the installation is complete, a small icon in your system tray (bottom

right corner of most screens) will appear. This is your shortcut to the Belkin

WLAN Monitor. It also indicates the status of your connection.

Green Icon: Connected to a wireless network, good connection

Yellow Icon: Connected to a wireless network, fair connection

Red Icon: No connection to a wireless network

Note: The Wireless LAN Utility icon will also appear in your Control Panel. To open

the Wireless LAN Utility, double-click on this icon.

INSTALLING AND SETTING UP THE CARD

10. If you are using Windows 2000 or Windows XP, you may see a screen

similar to the one below. This does not mean there is a problem. Select

“Continue Anyway”.

11. If you are using Windows 98 or Me, you will be asked to restart your

computer. Select “Restart”. If you are using Windows 2000 or XP, you will

see a window similar to the one below. Click “Finish”.

10 11

USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITY

Proceed with the following instructions for configuring your network profiles. The

instructions explain how to open the Utility and how to use it to configure a

network profile.

When you launch the Wireless LAN Utility (the Utility), you will be presented

with the “Connect to Wireless Network” screen.

The following small icon will also be present in your system tray.

Once installed, the Wireless LAN Utility will automatically display when Windows

boots up.

The Utility can be set to always show up in your system tray. You can hide the

icon if you right-click on it in your system tray. Although no icon will be

displayed, your preferred network will continue to be managed by the Card. The

system tray icon can be re-enabled from the Wireless LAN Configuration Utility,

available from the Control Panel.

Single-clicking on the icon in the system tray will open the window.

Note: You may double-click on the Utility icon on your system tray to go directly to

the “Advanced Configuration” window.

INSTALLING AND SETTING UP THE CARD

Connecting to your Wireless Network

If you already have a wireless router or an access point in your home or office,

the Card will automatically attempt to connect to your wireless network. In most

cases, the Card will be able to connect to your network automatically. If your

wireless network is using encryption, you will need to set the encryption settings

of your Card to match that of your wireless network. For information about

configuring your Card, see the next section in this manual.

Uninstalling the Software and Drivers

If you need to remove the software and drivers for any reason, you can easily

accomplish this in one of two ways. You can insert the software CD and click on

the “Uninstall” option in the menu, or you can go to the Windows Control Panel

and select the “Add/Remove Programs” option. The Belkin Wizard will walk you

through the removal process.

12 13

Note: Under Windows XP, clicking on the “Advanced” button for the first time will

display the following window. The “Use Windows to configure my wireless network

settings” option will be enabled by default. Click on the check box to disable it and

use the Belkin Wireless Network Utility instead.

USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITYUSING THE BELKIN WIRELESS LAN CONFIGURATION UTILITY

The Utility will automatically detect all the 802.11b and 54g wireless networks in

the area. Select an available listed network and click on the “Connect” button to

connect to that network.

If the wireless network you want to connect with has WEP encryption enabled,

the “Network key” text box will be active. Type the network key for that network

to connect.

Click “Cancel” to exit.

The “Advanced” button will allow you to view and configure more options of

your Card.

1514

USING THE BELKIN WIRELESS LAN UTILITY

Displays a list of the networks that you have configured. You may rank the

networks by selecting the network name in the “Preferred Networks” list then

clicking on the “Move UP” and “Move Down” buttons. Networks appearing higher

on the list will be preferred over networks listed lower on the list. If a preferred

network is unavailable, the Card will attempt to connect to the next available

network on the list.

Note: You must click on the “Apply” button before any changes take into effect.

(d) Preferred Network

The blue bubble on top of the icon for that network specifies that you are

currently connected to that network.

(e, f) Add, Remove

You may “Add” (e) and “Remove” (f) networks from the Preferred Networks list

by using these buttons.

(g) System Tray Icon

Check this box so that the wireless icon appears on your system tray.

(h) Properties

To check the properties and WEP settings of the preferred network, select a

network then click on the “Properties” button.

USING THE BELKIN WIRELESS LAN CONFIGURATION UTILITY

The Wireless Networks Tab

(a) Enable Radio

Use this option to toggle your wireless network radio ON or OFF. You may want

to turn the radio off while in airplanes or to conserve the battery life of your

mobile computer. When the radio is disabled, the power LED on your Card will

turn off and the system tray wireless network icon will be depicted with an “X”.

(b) Available Networks

This displays a list of all available wireless networks in your area. Select a

network by clicking on the network name or click on the “Refresh” (j) button to

rescan the area for available wireless networks to connect to.

Once you select a network, you can click on the “Configure” (i) button. Click

“OK” in the “Wireless Network Properties” box. The network name and icon will

appear at the top of the “Preferred Networks” (c) list. Wait up to one minute for

the network connection to be made. Your computer is connected to the selected

network when you see a blue bubble on top of the icon for that network.

(a)

(b)

(c)

(d)

(e)

(f)

(g) (h)

(i)

(j)

(k)

(l)

16 17

Andere Handbücher für F5D7010

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Belkin Netzwerkkarte Handbücher

Belkin

Belkin F5D70010 Bedienungsanleitung

Belkin

Belkin P74485-A Bedienungsanleitung

Belkin

Belkin F6D3000 Bedienungsanleitung

Belkin

Belkin F5D9010uk Bedienungsanleitung

Belkin

Belkin F5D6001 Bedienungsanleitung

Belkin

Belkin F5D7000 Handbuch

Belkin

Belkin F5D9010 Bedienungsanleitung

Belkin

Belkin F8T006-PC Bedienungsanleitung

Belkin

Belkin F5D9010 Bedienungsanleitung

Belkin

Belkin F5D7010v7 Bedienungsanleitung

Belkin

Belkin VISION N1 Bedienungsanleitung

Belkin

Belkin F5D8013 v3 Bedienungsanleitung

Belkin

Belkin F5D8013 Bedienungsanleitung

Belkin

Belkin F5D8010 Bedienungsanleitung

Belkin

Belkin F6D3000 Bedienungsanleitung

Belkin

Belkin F5D5020T Bedienungsanleitung

Belkin

Belkin F8T031 - Bluetooth Wireless USB Printer Adapter Print... Bedienungsanleitung

Belkin

Belkin F5D7050 Bedienungsanleitung

Belkin

Belkin F5D4085 Bedienungsanleitung

Belkin

Belkin F5D7050TT Bedienungsanleitung

Belkin

Belkin F8T001 Bedienungsanleitung

Belkin

Belkin F5D8000 Bedienungsanleitung

Belkin

Belkin F5D8055 Bedienungsanleitung

Belkin

Belkin SURF F5D4077UK Bedienungsanleitung

Beliebte Netzwerkkarte Handbücher anderer Marken

FirstComm

FirstComm OBiWiFi5G Bedienungsanleitung

Sun Microsystems

Sun Microsystems Interface Adapter Bedienungsanleitung

TRENDnet

TRENDnet TU2-ETG Bedienungsanleitung

YASKAWA

YASKAWA SI-EN3 Bedienungsanleitung

Paradyne

Paradyne BitStorm 2600 IP DSLAM Bedienungsanleitung

3Com

3Com EtherLink 3C509B Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITX Bedienungsanleitung

Cisco

Cisco MC16E Bedienungsanleitung

Delta Electronics

Delta Electronics Braking Modules VFDB Series Bedienungsanleitung

TwinMOS

TwinMOS Booming Bedienungsanleitung

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Bedienungsanleitung

Buffalo

Buffalo AirStation WLI-PCM-L11GP Bedienungsanleitung

National Instruments

National Instruments NI 9234 Bedienungsanleitung

Hama

Hama 49276 Bedienungsanleitung

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Bedienungsanleitung

Compaq

Compaq Wireless LAN 100 Bedienungsanleitung

Bose

Bose PowerMatch Dante Bedienungsanleitung

TRENDnet

TRENDnet TEG-PCITXR Bedienungsanleitung