BGS technic 3236 Bedienungsanleitung
SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Art. 3236
Air Grease Gun
Safety
• Read these instructions carefully and completely
before assembling or using the device.
• Always wear a TÜV-approved safety glasses.
• Make use before you determine that all components of the device firmly mounted.
• Only use compressed air wich the maximum pressure value of the tool do not exceed.
• Check the appliance on loose parts, fragile components, and other phenomena that could affect
the proper function.
• Have defective equipment repaired before use.
This grease gun is an air pressure tool which is ideal for lubricating greases and it is suitable for
transport tools, agricultural machinery, garden equipment, automobiles, industrial machinery.
The air grease gun has a precision trigger, which reduces the trigger pressure and thus ensures an
easy and pleasant dose of fat.
The gun is very handy and allows for easy working.
The special design also allows work in very narrow structures.
The grease gun can be filled with a cartridge or a bucket pump.
The special cylinder prevents the unwanted escape of excess grease fluid.
Technical Data
Working Pressure: 6.2 bar (90 psi)
Noise: LpA = 85.1 db(A) / LwA = 96.1 db(A)
Vibration: ahd = 0.51 m/s² / K = 0.55 m/s²
Precisions
Trigger
Handle
Cartridge
Cylinder
Adapter
Piston Rod
Air
Pressure
Adapter
Pipe
Driving
Plate
SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Instructions
Instructions for filling the grease gun (three options)
Insert a cartridge (Fig. 2)
a. Remove the cartridge cylinder.
b. Pull back the piston completely.
c. Remove the old cartridge. Insert a new cartridge into the cylinder
d. Mount the cartridge cylinder. Press the driving plate and the piston rod back down.
Pump filling (Fig. 3)
a. Pull back the piston completely.
b. Loosen the round nozzle. Connect the filling adapter with the filling pump.
c. Now operate the filling pump.
d. Disconnect after filling the grease gun from the filling pump.
e. Press the driving plate and the piston rod back down.
Hand filling (Fig. 4)
a. Remove the cartridge cylinder.
b. Pull back the plunger completely. Fill the cartridge by hand, now with a lubricant of your choice.
c. Mount the cartridge cylinder on the grease gun. Press the driving plate and the piston back down.
The precision trigger should be kept during the entire filling.
Oil the grease gun every day or before each use.
Maintenance
Add a little oil a day through the air hose coupling in the tool.
Troubleshooting
If the grease gun does not work properly, there is probably a problem with air in the grease gun. To fix
the error, follow this instruction:
1. Remove the pipe.
2. Loosen the cartridge cylinder about one to two rotations.
3. Pull out the piston rod a few times and push them back. The excess air will pump out.
4. Press the trigger button and test whether of grease flow.
5. Repeat the above steps if necessary.
6. Tighten the cartridge cylinder again.
7. Reinstall the pipe.
8. The air is removed and the grease gun works perfectly again.
Fig.2 Fig.3 Fig.4
SW-Stahl und Werkzeugvertriebs GmbH Tel. +49 (0) 2191 / 46438-0
F56essartSresukreveL ax +49 (0) 2191 / 46438-40
ed.lhatsws@ofni:liaM-EdiehcsmeR79824-D
CE-Erklärung
BGS technic KG
Bandwirkerstr. 3
42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
EU-KONFORMITÄTSERKLÄRUNG
EC DECLARATION OF CONFORMITY
DÉCLARATION„CE“ DECONFORMITE
DECLARATION DE CONFORMIDAD UE
Wir erklären in alleiniger Verantwortung, dass die Bauart des Produktes:
We declare that the following designated product:
Nous déclarons sous propre responsabilité que ce produit:
Declaramos bajo nuestra sola responsabilidad que este producto:
folgenden einschlägigen Bestimmungen entspricht:
complies with the requirements of the:
est en conformité avec les réglementations ci-dessous:
esta conforme a las normas:
Angewandte Normen:
Norme appliquée:
Normas aplicadas:
ppa.
Frank Schottke, Prokurist
BGS technic KG, Bandwirkerstrasse 3, D-42929 Wermelskirchen
Wermelskirchen, den
Druckluft Fettpresse (BGS Art. 3236)
Air Grease Gun
Neumática pistola de engrase
Engrasadora neumática
Machinery Directive 2006/42/EC
EN ISO 15744:2008
Reference No.: MD No. 11473-70304 / YB-801
Test Report No.: 11473-12012
26.01.2016
Inhaltsverzeichnis
Andere BGS technic Werkzeuge Handbücher
BGS technic
BGS technic 9689 Bedienungsanleitung
BGS technic
BGS technic 67305 Bedienungsanleitung
BGS technic
BGS technic 9010 Bedienungsanleitung
BGS technic
BGS technic 8584 Bedienungsanleitung
BGS technic
BGS technic 98253 Bedienungsanleitung
BGS technic
BGS technic 149 Bedienungsanleitung
BGS technic
BGS technic 1678 Bedienungsanleitung
BGS technic
BGS technic 8687 Bedienungsanleitung
BGS technic
BGS technic 6932 Bedienungsanleitung
BGS technic
BGS technic BGS 8156 Bedienungsanleitung
BGS technic
BGS technic 62625 Bedienungsanleitung
BGS technic
BGS technic 5262 Bedienungsanleitung
BGS technic
BGS technic 1899 Bedienungsanleitung
BGS technic
BGS technic BGS 9086 Bedienungsanleitung
BGS technic
BGS technic 8457 Bedienungsanleitung
BGS technic
BGS technic 8595 Bedienungsanleitung
BGS technic
BGS technic 3380 Bedienungsanleitung
BGS technic
BGS technic 62642 Bedienungsanleitung
BGS technic
BGS technic 875 Bedienungsanleitung
BGS technic
BGS technic 62614 Bedienungsanleitung
