BGS technic 8464 Bedienungsanleitung

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 8464

Silentblocks Tool Kit | for Fiat

ATTENTION

Read the operating instructions and all safety instructions contained therein carefully before using the

product. Use the product correctly, with care and only according to the intended purpose. Non-

compliance of the safety instructions may lead to damage, personal injury and to termination of the

warranty. Keep these instructions in a safe and dry location for future reference. Enclose the

operating instructions when handing over the product to third parties.

INTENDED USE

This tool is used for mounting of rear axle silent blocks on Fiat Stilo (2001-), Fiat Bravo (2007-) and

Lancia Delta (2008-).

SAFETY INFORMATIONS

•Read carefully the instructions before working with this tool set.

•Do not use this tool set for other purpose for which it is designed.

•Lifting of vehicles only allowed on the special lifting points.

•Before starting work under a car always ensure that it is adequately supported by axle stands

or ramps. Chock wheels and ensure that the hand brake is firmly applied.

•Always use approved eye protection, especially when working under vehicles.

•Ensure a secure and well-gripped stance during fitting.

•Ensure that tools are correctly mounted.

•Regularly check the condition of the tool and replace the damaged parts.

•Do not over tighten or use undue force as this can cause damage to both tool and component.

•The tool is not suitable for air impact wrenches. The use of an air impact wrench may lead to

the spindle bearing or other components bursting and fragments of components flying around

may lead to injuries.

•Always use workshop manual for detailed instructions.

•Always lubricate the screw threads before using the tool.

•Check & replace any damaged components as required.

•Keep children and unauthorized persons out of the working area.

•Keep this tool out of children reach.

COMPONENTS

1 Spindle

2 Spindle nut with bearing

3 Thrust plate with bores

4 Pins

5 Thrust plate

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

SILENTBLOCKS

This tool set is suitable for following

bushes with e.g. original part numbers:

50700796, 50702649, 50706312,

50706505, 51795336, 51812443,

51840600

USE

1Spindle

2Spindle nut with bearing

3Thrust plate with installed pins (4)

4Thrust plate

ARear axle

BBush

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories

and packaging should be sorted, taken to a recycling centre and disposed of in a manner

which is compatible with the environment. Contact your local solid waste authority for

recycling information. Dispose of this product at the end of its working life environmentally.

Inhaltsverzeichnis

Andere BGS technic Werkzeuge Handbücher

BGS technic

BGS technic 6774 Bedienungsanleitung

BGS technic

BGS technic BGS 67302 Bedienungsanleitung

BGS technic

BGS technic 62636 Bedienungsanleitung

BGS technic

BGS technic 3380 Bedienungsanleitung

BGS technic

BGS technic 9538 Bedienungsanleitung

BGS technic

BGS technic 9276 Bedienungsanleitung

BGS technic

BGS technic 3541 Bedienungsanleitung

BGS technic

BGS technic 3361 Bedienungsanleitung

BGS technic

BGS technic 70105 Bedienungsanleitung

BGS technic

BGS technic 8951 Bedienungsanleitung

BGS technic

BGS technic 9445 Bedienungsanleitung

BGS technic

BGS technic 50440 Bedienungsanleitung

BGS technic

BGS technic 6282 Bedienungsanleitung

BGS technic

BGS technic 3140 Bedienungsanleitung

BGS technic

BGS technic 8846 Bedienungsanleitung

BGS technic

BGS technic 8231 Bedienungsanleitung

BGS technic

BGS technic 149 Bedienungsanleitung

BGS technic

BGS technic 3236 Bedienungsanleitung

BGS technic

BGS technic 70917 Bedienungsanleitung

BGS technic

BGS technic 8954 Bedienungsanleitung

BGS technic

BGS technic 65630 Bedienungsanleitung

BGS technic

BGS technic 8570 Bedienungsanleitung

BGS technic

BGS technic 9465 Bedienungsanleitung

BGS technic

BGS technic 8527 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung