BGS technic 9689 Bedienungsanleitung

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

BGS 9689

Timing Chain Test Tool Set

for VAG 1.2 / 1.4 TFSi

TOOLS

Timing Chain Test Tool Set, to be used as OEM T10550, consisting of the following tools:

1 Camshaft retainer, to be used as OEM T10550/1

2 Pointer, to be used as OEM T10550/2

3 Measuring gauge with crankshaft pulley plate, to be used as OEM T10550/3

INTENDED USE

This tool set is made to check timing chains on VAG 1.2 and 1.4L TFSi engines.

More information regarding this item and a list of suitable engines and models can be found on our

website: www.bgstechnic.com

SAFETY INFORMATION

•Do not use the tool if parts are missing or damaged.

•Use the tool for the intended purpose only.

•Never place the tool on the vehicle battery. There is a risk of a short circuit.

•Be careful when working with the engine running. Loose clothing, tools and other objects can

be caught by rotating parts and cause serious injury.

•Keep children and other unauthorized persons away from the work area.

•Be careful when working on hot engines because of the risk of burn injuries.

•If you remove the ignition key before repairing, you can prevent the engine from being started

accidentally and resulting in engine damage.

•This manual serves as a brief guide and does not replace a workshop manual. Always refer to

the vehicle-specific service literature, particularly the technical data such as torque values and

instructions for disassembly/assembly, etc.

•After repair or before starting the engine, turn a minimum of 2 turns by hand and check the

timing again.

•Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)

BGS technic KG

Bandwirkerstr. 3

D-42929 Wermelskirchen

Tel.: 02196 720480

Fax.: 02196 7204820

mail@bgs-technic.de

www.bgstechnic.com

USE

When checking the timing chain, the engine oil temperature must be at least 40°C.

Disassemble all required components for this test (see workshop manual).

Remove screws from both camshaft covers.

Remove both camshaft covers from the cylinder head.

The bore in the exhaust camshaft must be in the position shown

(B).

Insert camshaft retainer (9689-1) into camshaft openings until

stop.

Insert the locking pin (A) into the bore (B) of the exhaust

camshaft.

Tighten the camshaft retainer (9689-1) with original camshaft

cover bolts by hand.

Place the pointer (9689-2), vertically aligned and pointing

upwards, into the hole in the oil pan.

Mount the measuring gauge with crankshaft pulley plate (9689-3).

Fit the torque wrench on the crankshaft bolt with the appropriate socket wrench.

Turn the crankshaft clockwise and keep it pressed to 40 Nm.

Adjust the measuring gauge (9689-3) until the »0« points to the pointer (9689-2).

Switch torque wrench to reverse direction and slowly press counterclockwise with 40 Nm.

Read the displayed value on the scale and compare it with the workshop manual.

If a timing chain jump occurs during the test, replace the timing chain.

9689-1

9689-2

9689-3

Inhaltsverzeichnis

Andere BGS technic Werkzeuge Handbücher

BGS technic

BGS technic BGS 8156 Bedienungsanleitung

BGS technic

BGS technic 67305 Bedienungsanleitung

BGS technic

BGS technic 1124 Bedienungsanleitung

BGS technic

BGS technic 875 Bedienungsanleitung

BGS technic

BGS technic BGS 1924 Bedienungsanleitung

BGS technic

BGS technic 70114 Bedienungsanleitung

BGS technic

BGS technic 1898 Bedienungsanleitung

BGS technic

BGS technic 70943 Bedienungsanleitung

BGS technic

BGS technic 1155 Bedienungsanleitung

BGS technic

BGS technic 8649 Bedienungsanleitung

BGS technic

BGS technic 9246 Bedienungsanleitung

BGS technic

BGS technic 569 Bedienungsanleitung

BGS technic

BGS technic 1230-1 Bedienungsanleitung

BGS technic

BGS technic 9451 Bedienungsanleitung

BGS technic

BGS technic 8954 Bedienungsanleitung

BGS technic

BGS technic 8418 Bedienungsanleitung

BGS technic

BGS technic 8780 Bedienungsanleitung

BGS technic

BGS technic 149 Bedienungsanleitung

BGS technic

BGS technic 8305 Bedienungsanleitung

BGS technic

BGS technic 8408 Bedienungsanleitung

BGS technic

BGS technic 50440 Bedienungsanleitung

BGS technic

BGS technic 8785 Bedienungsanleitung

BGS technic

BGS technic EWS1017 Bedienungsanleitung

BGS technic

BGS technic 3236 Bedienungsanleitung

Beliebte Werkzeuge Handbücher anderer Marken

Martor

Martor SECUNORM 175 Bedienungsanleitung

ERKCO

ERKCO 1000 Bedienungsanleitung

jbc

jbc N4473 Bedienungsanleitung

FEINMETALL

FEINMETALL FZWZ-SET-001 Bedienungsanleitung

Worx Professional

Worx Professional Sonicrafter WU676 Bedienungsanleitung

Gage Bilt

Gage Bilt GB713SH Bedienungsanleitung

Hilti

Hilti DX 9-ENP Bedienungsanleitung

norbar

norbar NORTRONIC 34399 Bedienungsanleitung

Makita

Makita DHR241 Bedienungsanleitung

Motor Guard

Motor Guard JMB-1250 Bedienungsanleitung

Power Adhesives

Power Adhesives 805-12 Bedienungsanleitung

Clemco

Clemco 24189 Bedienungsanleitung

VVG

VVG VNG 903 Series Bedienungsanleitung

Hilti

Hilti FX 3-A Bedienungsanleitung

Grizzly

Grizzly H6472 Bedienungsanleitung

axing

axing BWZ 5-02 Bedienungsanleitung

Dh-Robotics

Dh-Robotics RGI-100 Anleitung zur Verwendung

Goobay

Goobay 97790 Bedienungsanleitung