Billy Goat CR551V Bedienungsanleitung

CR POWER RAKE Owner’s Manual

Part No 350518 1350518_-_HI

COMPACT POWER RAKE Owner's Manual

CR551V

Beginning Serial #: 01t0616001

Accessories Replacement Parts

Original Instructions

IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE

SLICING REEL

A complete verti-

slicing reel for your

CR. 20" wide reel

for use in grasses

that require vertical

cutting, and for

assisting in lawn

overseeding

projects.

P/N 350252

FLAIL BLADES

A complete

replacement set.

30 of our high

quality flail

blades for your

CR. Includes 8

new lock clips for

replacement

installation.

P/N 350251

SLICING BLADES

A full set of twenty

blades for

replacement.

Includes 40 new

capscrews, and lock

nuts for replacement

installation.

P/N 350187

SPACER

BUMPERS

A complete

replacement set.

44 of 1/2" spacer

bumpers and 4

of 1/4" spacer

bumpers

P/N 350258

DRIVE

BELT

Original

Equipment drive

belt for your CR.

P/N 350207

FLAIL SHAFTS

A full set of four

shafts for

replacement.

Includes 8 new lock

clips for

replacement

installation.

NOTE: We

recommend

replacing the shafts

when you replace

flails.

P/N 350185

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 1 350518_-_HI

ABOUT THIS MANUAL

THANK YOU for purchasing a BILLY GOAT®CR Power Rake. Your new machine has been carefully designed and

manufactured to provide years of reliable and productive service. This manual provides complete operating and maintenance

instructions that will help to maintain your machine in top running order. Read this manual carefully before assembling,

operating, or servicing your equipment.

CONTENTS

SPECIFICATIONS AND SAFETY 3

INTENDED USE & INSTRUCTION LABELS 4

PACKING CHECKLIST & ASSEMBLY 5

OPERATION 6-7

MAINTENANCE 8-9

TROUBLESHOOTING AND WARRANTY PROCEDURE 9

PART ILLUSTRATION & PARTS LIST 10-13

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

SPECIFICATIONS

CR551V

Engine: HP 5.0 (3.73 kW)

Engine: Model 10V3320003F1

Engine: Type Briggs and Stratton

Engine: Fuel Capacity 3.3 qt (3.1L)

Engine: Oil Capacity 0.63 qt (0.6L)

Total Unit Weight: 125# (56.8 kg)

Max. operating slope 20

In accordance with 2000/14/EEC standards 99 dB(a)

SAFETY

WARNING

This product can expose you to chemicals including gasoline engine exhaust, which is known to the State

of California to cause cancer, and carbon monoxide, which is known to the State of California to cause

birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

Read the safety rules and follow them closely. Failure to obey these rules could result in loss of control of

the unit, severe personal injury or death to you, or bystanders, or damage to property or equipment.

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

INTENDED USE

This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to assist in overseeding

operations. The machine should not be used for any other purpose than that stated above.

DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for

damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See troubleshooting section on

page 9).

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT®CR Power Rake. If any labels are damaged or missing, replace

them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for

convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and

Item numbers shown.

LABEL DANGER KEEP HANDS LABEL CLUTCH ITEM #49 DANGER FLYING DEBRIS

AND FEET AWAY P/N 830503 ITEM # 48 P/N 810736

ITEM #51 P/N 400424

LABEL CAUTION GUARD LABEL EXPLOSIVE FUEL LABEL INSTRUCTION HEIGHT ADJ.

ITEM #52 P/N 900327 ITEM # 50 P/N 400268 ITEM #35 P/N 350224

ENGINE LABELS/CONTROLS

Briggs & Stratton

Set lever to choke when starting cold

Set lever to desired engine speed.

Move lever completely to the left

to stop engine

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

PACKING CHECKLIST

NOTE: Items in ( ) can be referenced in the Parts Illustration and Parts List on pages 10-11.

Your Billy Goat Power Rake is shipped from the factory in one carton, completely assembled.

PUT OIL IN ENGINE BEFORE STARTING

ASSEMBLY

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box the Handle Assembly is attached and folded over.

NOTE: Items in ( ) can be referenced in the Parts Illustration and Parts list on pages 10-11.

1. UNFOLD the upper handle (item 26) and slide handle lock loops (item 28) into place to secure the upper handle to the

lower.

2. CHECK engine oil level and fill to proper level with engine manufacturers recommended grade of oil. Move height adjust

lever to down position, to level engine during checking. See engine manufacturer’s instruction manual.

3. CONNECT spark plug wire.

Boxing Parts Checklist

Vanguard Engine

Manual

Literature Assy

P/N-350045

PARTS BAG & LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-350518, Declaration of Conformity P/N-100504, General Safety and

Warnings manual P/N-100295, and Literature CR Accessories 350246.

LV, .386" X 1.063" X .082" MZ

/8"-16 X 1" HCS ZP

NG WA

NG REEL

E MTG.

DE MTG.

EL PM

/4-20 X 3/4 HCS ZP

4-20

RDENED REEL OS900SP

7 x 1.750 x 0.119

CK 7/8 INT. TOOTH

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

OPERATION

STARTING ENGINE

See engine manufacturer’s instructions for type and amount of oil and gasoline used. Engine must be level when checking and

filling oil and gasoline.

FUEL VALVE:Move fuel valve to "ON" position (when provided on engine).

STOP SWITCH:Located on the engine. "slow/stop" position.

CHOKE: Operated with choke lever on side of engine.

THROTTLE:Controlled by throttle lever on the motor.

If your unit fails to start, check the troubleshooting section on page 9 and also see the engine manual.

SLICING OPERATION

NOTE: NEVER PARK THIS UNIT ON A SLOPE OF ANY KIND. Always keep

the reel in the up position when parking the unit.

BLADE POSITION & DEPTH CONTROL LEVER: The blades can be raised or

lowered into the ground by height adjustment lever on the engine base. The

resulting blade depth can be adjusted higher or lower. (See Fig. 1 & 2)

ADJUSTING BLADE DEPTH: The depth of the blades can be raised or lowered by

rotating the knob on the top of the adjustment lever. The blades are lowered by

rotating the knob counter-clockwise, and raised by rotating the knob clockwise.

The relative depth of the blades can be gauged by using the depth scale located

on the right front corner of the engine base. (See Fig. 3)

FOLDING HANDLE:This unit is equipped with a folding upper handle for easier

storage and transportation. The handle can be folded by sliding the handle lock

loops up (item 28). This releases the upper handle, allowing it to be folded over

the unit.

HANDLING & TRANSPORTING:This unit requires two people to lift it. With

the handle in the folded position, lift holding the lower handle and belt/shaft guard

one on each side of the machine. Secure the machine in place during transport.

Never lift the machine while the engine is running.

RAKING OPERATION

SET DEPTH: With engine off, set the raking depth so that the blades just touch on a flat surface (i.e. driveway, or sidewalk).

ENGAGE BLADES: Pull back on the bail on the operators handle. NOTE: When engaging the blades in heavy load conditions,

i.e. heavy thatch or very uneven turf, push down on the operators handle lifting the front wheels slightly. Engage the blades.

Slowly lower the unit into the turf.

RAKE: Rake a small test area and examine the results. Thatch should be removed and deposited on top of the healthy grass. If

excessive damage occurs to healthy grass, adjust the blade depth to decrease damage. Continue raking the yard, working in

one direction (i.e. north-south, or east-west). NOTE: If a large drop in engine RPM occurs, or the unit pulls you forward and

bounces during operation, the blade depth is set too low.

REMOVE THATCH:After raking, a layer of thatch will be deposited over the top of the lawn. This thatch must be removed prior

to any fertilizing, seeding, or watering of the lawn. We suggest the use of a lawn vacuum or wheeled blower for collection and

removal of the thatch.

Fig. 1

Fig. 2

Fig. 3

STORAGE: Never store engine indoors or in enclosed poorly ventilated areas

with fuel in tank, where fuel fumes may reach an open flame, spark or pilot light, as

on a furnace, water heater, clothes dryer or other gas appliance.

If engine is to be unused for 30 days or more, prepare as follows:

Remove all gasoline from carburetor and fuel tank to prevent gum deposits from forming on these

parts and causing possible malfunction of engine. Drain fuel outdoors, into an approved container,

away from open flame. Be sure engine is cool. Do not smoke. Run engine until fuel tank is empty and

engine runs out of gasoline.

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

VERTI-CUTTING OPERATION

SET DEPTH:With engine off, set the raking depth so that the blades just touch on a flat surface (i.e. driveway, or sidewalk).

ENGAGE BLADES:Pull back on the bail on the operator’s handle. NOTE: When engaging the blades in heavy load conditions (i.e.

heavy thatch, or very uneven turf), push down on the operator’s handle lifting the front wheels slightly. Engage the blades. Slowly

lower the unit into the turf.

SLICE:Verti-cut a small test area and examine the results. Some thatch and cut stems should be removed and deposited on top of

the healthy grass. Grass runners should be cut and ready for removal. If excessive damage occurs to healthy grass, adjust the

blade depth to decrease damage. Continue raking the yard, working in one direction (i.e. north-south, or east-west). NOTE: If a large

drop in engine RPM occurs, or the unit pulls you forward and bounces during operation, the blade depth is set too low.

REMOVE THATCH/STEMS:After verti-cutting, a layer of thatch and cut stems will be deposited over the top of the lawn. We

suggest the use of a lawn vacuum or wheeled blower for collection and removal of the thatch/stems.

*****TIPS*****

MOW

Mow the lawn to its normal cut height.

DRY

Be sure grass is dry. Wet conditions can cause increased damage to healthy grass.

INSPECT

Check the lawn before beginning work. Remove all rocks, wire, string, or other objects that can present a hazard during work prior

to starting.

IDENTIFY

Mark all fixed objects to be avoided during work, such as sprinkler heads, water valves, buried cables, or clothes line anchors, etc.

THATCH

Thatch is a dense layer of dead grass, clippings, and roots that builds up over time at the base of the lawn preventing air, water,

and fertilizer from reaching the soil. This can cause shallow root development and make a lawn more susceptible to drought and

disease. Thatch also provides an ideal environment for insects to hide and multiply. Periodic removal of thatch will keep your lawn

in good health.

HEAVY THATCH

Lawns with an excessive amount of thatch will require multiple treatments for effective removal. Trying to remove excessive thatch

(greater than 3/4"[19 mm] deep) in one treatment will damage or destroy the living part of the lawn. It is best to remove heavy

thatch in seasonal treatments (i.e. spring, and fall).

CHECK

Before beginning, it is best to evaluate the condition of the lawn by cutting one or more core samples from the area to be treated.

A core can be cut using a piece of pvc, or metal pipe. Hammer the pipe into the ground, remove it, push the core out of the pipe

and inspect it to determine the depth of thatch in your yard.

SLOPES

Rake slopes across not up and down the slope. This is much easier and safer for the operator and is better for the lawn. Raking

across will help to reduce runoff during watering and allow the sloped ground to hold more seed, fertilizer, and water. The units

maximum operating slope is 35% or 19°.

DEPTH

The wide range of depth adjustment on your unit is provided to allow for blade wear. Setting the reel deeper will not produce

better, or quicker results. The flail reel is intended to be set so it just touches the surface on flat ground. The slicing reel should be

set even with the ground for verti-slicing work, and set to a maximum 1/2" depth for overseeding jobs. Setting the reel deeper than

this will only result in premature wear on the unit (i.e. failed belt). If you desire to work the ground deeper than the above

guidelines allow, it should be done gradually in multiple passes.

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

MAINTENANCE

PERIODIC MAINTENANCE

NOTE: Items in ( ) can be referenced in the Parts Illustration and Parts List on pages 10-11.

Periodic maintenance should be performed at the following intervals:

Maintenance Operation Every Use (daily) Every 25 Hours

Inspect for loose, worn or damaged parts 

Check engine oil 

Inspect belt 

Engine (See Engine Manual)

Grease reel bearings 

Inspect and clean engine air filter 

Oil height adjustment linkage 

FLAIL BLADE WEAR

1. Wait for engine to cool and disconnect spark plug.

2. Close fuel valve on engine. (Honda only)

3. Lean unit back onto lower handles and secure in place.

4. Inspect blades for wear, and immediately replace any bent, or cracked

blades. Measure the overall length of the blade. (See Fig. 4)

5. If blades measure less than 3.0"(76 mm) in overall length, they must be

replaced. NOTE: We recommend replacing all the flails at once.

SLICING BLADE WEAR

1. Wait for engine to cool and disconnect spark plug.

2. Close fuel valve on engine. (Honda only)

3. Lean unit back onto lower handles and secure in place.

4. Inspect blades for wear, and immediately replace any bent or cracked blades. Measure the overall length of

the blade from the center of the attachment bolts to the tip of the worn blade.

5. If blades measure less than 3.0"(76 mm) they must be replaced. NOTE: We recommend replacing all the

blades at once.

ROTATING FLAIL REEL END TO END

To maximize flail blade life and performance, the reel can be rotated end to end periodically to provide a fresh lead cutting edge.

Takes approx. 20 min. and requires two 1/2" socket wrenches with extension bar.

1. Wait for engine to cool and disconnect spark plug.

2. Close fuel valve on engine.

3. Lean unit back onto lower handles and secure in place.

4. Remove six screws (item 65) holding the belt and shaft guards (item 21 & 22) in place. It is necessary to lower the height

adjust lever to reach the locknuts on the guards. Remove the guards.

5. Remove the drive belt (item 9) by "walking" it out of the groove on the reel pulley (item 2).

6. Remove the four lock nuts (item 47) and washers (item 35) holding the bearings (item 23) to the frame of the unit.

7. The reel (item 6) is now free from the machine. Slide the reel down and out of the machine.

8. Remove the capscrew (item 58), lock washer (item 57), reel pulley (item 2), key (item 75), and reel spacer (item 10) from the

end of the reel.

9. Rotate the reel end to end, and re-install these items on the opposite end of the reel.

10. Re-install the reel in reverse order of removal. Re-install the guards in reverse order of removal.

Fig. 4

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

TROUBLESHOOTING

DRIVE BELT REPLACEMENT

NOTE: Takes approx. 10 min. and requires 3/8" socket wrench with extension.

1. Wait for engine to cool and disconnect spark plug.

2. Remove six self-tapping screws (item 65) holding the belt guard (item 21 & 22) in place. Remove the guard.

3. Remove the belt (item 9) by rotating the reel pulley (item 2) and walking it out of the groove. Discard old belt

4. Install new belt using same procedure to walk the belt into the groove.

5. With new belt installed, pull bail rod back to engaged position and measure extension of idler spring. Spring should stretch 1"

to 1.25" (25-32 mm) with bail engaged. Adjust clutch cable as necessary to achieve this extension.

6. Re-install the belt guard.

Problem Possible Cause Solution

Abnormal vibration

Damaged or missing blades.

Loose handle bolts. Loose engine

bolts.

Stop work immediately. Replace any

damaged or missing blades. Tighten

all loose nuts and bolts.

Engine stalls or labors when

raking

Blades set too deep into ground.

Raise blades so that they just touch

the ground on a level surface.

Engine will not start Throttle in off position. Check choke position.

Out of gasoline or bad, old

gasoline.

Check gasoline.

Spark plug wire disconnected. Connect spark plug wire.

Gas valve off. Turn on gas valve.

Dirty air cleaner.

Clean or replace air cleaner. Contact a

qualified service person.

Engine is locked, will not pull

over

Debris locked against reel, or drive

pulleys. Engine problem.

Pull spark plug wire and remove

debris. Contact an engine servicing

dealer for engine problems.

NOT FOR REPRODUCTION

CR POWER RAKE Owner’s Manual

Part No 350518 350518_-_HI

CR PARTS DRAWING

NOT FOR REPRODUCTION

Inhaltsverzeichnis

Andere Billy Goat Rasen- und Gartengeräte Handbücher

Billy Goat

Billy Goat LB35 Bedienungsanleitung

Billy Goat

Billy Goat F601S Konfigurationshandbuch

Billy Goat

Billy Goat HTR1803VEU Montageanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat OS900SPS Bedienungsanleitung

Billy Goat

Billy Goat F042508A Bedienungsanleitung

Billy Goat

Billy Goat PR550 Montageanleitung

Billy Goat

Billy Goat GZ401H Bedienungsanleitung

Billy Goat

Billy Goat PL1802V Bedienungsanleitung

Billy Goat

Billy Goat OS901SPS Bedienungsanleitung

Billy Goat

Billy Goat KD502SPQ Montageanleitung

Billy Goat

Billy Goat KD512HC Montageanleitung

Billy Goat

Billy Goat PL1801 Bedienungsanleitung

Billy Goat

Billy Goat GZ401H Montageanleitung

Billy Goat

Billy Goat MV650H PUSH Bedienungsanleitung

Billy Goat

Billy Goat MV600SPE Bedienungsanleitung

Billy Goat

Billy Goat HTR1602V Montageanleitung

Billy Goat

Billy Goat F1002SPV Bedienungsanleitung

Billy Goat

Billy Goat SC181HEU Bedienungsanleitung

Billy Goat

Billy Goat F012507A Bedienungsanleitung

Billy Goat

Billy Goat SC18OH Bedienungsanleitung

Billy Goat

Billy Goat KV600SPFB Bedienungsanleitung

Billy Goat

Billy Goat QL2000VE Montageanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung