Billy Goat MV601SPE Bedienungsanleitung

MVSPOwner’sManual

Part No 840245 1840245_B_LO

Self-Propelled Multi-Vac Owner’s Manual

MV650SPH, MV601SPE, and MV650SPHDS

Beginning Serial #: 020516001

Accessories

Original Instructions

IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.

CASTER KIT

Use on hard surface

for maneuverability.

P/N 840129

HOSE KIT

For vacuuming hard

to reach areas.

P/N 840116

BAG LINER KIT

To collect leaves,

thatch, and grass.

P/N 840134

FELT BAG KIT

Use on all dusty

conditions.

P/N 840194

LINER KIT

Interior housing liner

to decrease housing

wear.

P/N 840201

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 2 840245_B_LO

CONTENTS

SPECIFICATIONS AND SAFET 3

INSTRUCTION LABELS 4

ASSEMBLY INSTRUCTIONS 5-6

OPERATION 7-9

MAINTENANCE AND TROUBLESHOOTING 10-15

ILLUSTRATED PARTS LIST 16-24

DECLARATION OF CONFORMITY 25-27

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.

Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 3 840245_B_LO

SPECIFICATIONS

MV650SPH MV601SPE MV650SPHDS

Engine Type Honda GSV190LN1L Briggs and Stratton

Professional Series

121S02-0110-F1

Honda GSV190LN1L

Horsepower 6.5 (4.85 kW) 5.0 (3.73 kW) 6.5 (4.85 kW)

Fuel Capacity 1.6 qt (1.5 L) 1.2 qt. (1.14 L) 1.6 qt (1.5 L)

Oil Capacity 0.58 qt (0.54L) 0.56 qt. (0.53 L) 0.58 qt (0.54L)

Unit Weight 179 lbs (81.2 kg) 204 lbs (92.5 kg) 179 lbs (81.2 kg)

Overall Dimensions 28” Wide x 62.5” Long x

45.5” High 28” Wide x 62.5” Long x

45.5” High

Maximum Operating Slope 20o20o20o

In compliance with 2000/14/EEC

standards 103 dB(a) at 3320 rpm 105.5 dB(a) 103 dB(a) at 3320 rpm

Sound at Operators Ear 83 dB(a) at 3320 rpm 89 dB(a) 83 dB(a) at 3320 rpm

Vibration at operator position 1.43g(14.00 m/s2) 1.28g (12.57 m/s2) 1.43g(14.00 m/s2)

SAFETY

WARNING

This product can expose you to chemicals including gasoline engine exhaust, which is known to the State

of California to cause cancer, and carbon monoxide, which is known to the State of California to cause

birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 4 840245_B_LO

INSTRUCTIONLABELS

The labels shown below were installed on your BILLY GOAT®MV Vacuum. If any labels are damaged or missing, replace them

before operating this equipment. For your convenience in ordering replacement labels, part numbers are included in the Illustrated

Parts List. The correct position for each label may be determined by referring to the Figure and Item numbers shown.

LABEL FUEL WARNING LABEL EAR EYE BREATHE READ LABEL HEIGHT ADJUST LABEL CLUTCH

ITEM 55 P/N 400268 ITEM 162 P/N 100346 ITEM 34 P/N 840054 ITEM 120 P/N500176

LABEL DANGER LABEL DANGER LABEL DOOR OPENING LABEL GUARDS

ITEM 11 P/N 400424 ITEM 174 P/N 810736 ITEM 175 P/N 840080 ITEM 118 P/N 900327

ENGINE LABELS CONTROLS

Throttle Drive

P/N 840045 P/N 510127

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 5 840245_B_LO

ASSEMBLYINSTRUCTIONS

Your BILLY GOAT®MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper Handle Assembly.

Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower handle and the Housing Assembly.

PARTS BAG HARDWARE

DISCONNECT spark plug wire before assembling unit.

1st

ITEM NO. PART NO. DESCRIPTON QTY

139 840061 ROD LIFT NOZZLE DOOR 1

150 900407 TY- WRAP 2

152 8171003 WASHER 5/16" FLAT ZP 4

153 8160002 NUT LOCK 5/16"-18 2

158 8041006 SCREWCAP 1/4"-20 X1" ZP 2

159 8041031 SCREWCAP 5/16" X1 3/4"ZP 2

160 8171004 WASHER 3/8 FLAT 4

161 8172007 WASHER 1/4" SAE ZP 5

164 400886 ROD END BALL JOINT3/8" NF 2

165 8041052 SCREWCAP 3/8"-16 X1 1/2"ZP 1

166 8160003 NUT LOCK 3/8"-16 2

167 8041056 SCREWCAP 3/8"-16 X2 1/2"ZP 1

170 8041004 SCREWCAP 1/4"-20 X3/4"HCS ZP 1

171 8172019 WASHER FENDER 1/4"ZP 2

173 840071 NUTACORN 1/4"-20 2

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box. The Hood/Upper Handle Assembly is attached to the

unit by cables.

Boxing Parts Checklist

Honda 6.5 Engine

B&S 6 Engine

Parts bag P/N-840187

Ty-wraps (2 ea)

PARTS BAG & LITERATURE ASSY

Warranty card P/N- 400972, Owner’s Manual P/N-840245, General Safety and Warnings Manual P/N-100294, Declaration of

Conformity P/N-840204

Fig. 1

1. Attach hood assembly to the housing then hold in place during step 2.

NOTE: be sure all cables are routed on the underside of the hood and

housing. (See Fig. 1)

2. Install (item 170) center bolt first when aligned with a nut on the housing.

(See Fig. 2)

3. Attach rest of hood assembly to the housing using corresponding

hardware. NOTE: You will have to insert the bolt/washer from the inside

by reaching through the hood. (See Fig. 2)

4. Attach upper handle brace to lower handle using corresponding hardware.

Then repeat this step on the other side. (See Fig. 3 next page)

5. Attach rod end (item 164) to the nozzle door rod then secure in place by

tightening jam nut. (See Fig. 4 next page)

6. Attach nozzle door rod to the nozzle door using corresponding hardware.

NOTE: It is easier to do this with nozzle door closed.

7. Attach rod end to rod (See Fig. 5 next page).

8. Attach nozzle door rod to the lever with nozzle door closed and lever in

hose kit position. NOTE: Check to see that the nozzle door opens and

closes all the way (see page 15). Tighten or loosen the rod end (item 164)

for any adjustments. (See Fig. 4 and 5 next page)

9. Install cable ty wraps.

10. Reconnect spark plug wire.

11. Attach the bag. (See Fig. 7)

Fig. 2

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 6 840245_B_LO

HERE

Fig. 3

Fig. 4

Fig. 5

Fig. 6

Fig. 7

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 7 840245_B_LO

OPERATION

This vacuum is designed for picking up trash, organic material and other similar debris. It should not be used for other purposes

than what is intended.

OPERATOR CONTROLS

The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow

both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator’s controls are shown below.

Operator Control Locations

1 Drive Clutch Lever 2 Bag Latch 3 Pull Starter

4 Throttle Control 5 Drive Shifter Control 6 Nozzle Door Adjuster

STARTING

CHECK engine oil level before operating machine.

Secure unit at the handle with left

hand during start.

Pull rope starter with right

hand.

On Electric

models only.

DO NOT START equipment without the debris bag in place.

1. Place equipment on a level, firm surface that is free of rocks or other

debris.

2. Place throttle in START position.

3. Secure the unit with left hand at the handle then pull starter rope with right

hand to start engine. NOTE: Pull starter cord slowly until resistance is felt.

Then pull cord rapidly to avoid kickback.

4. Move throttle control back to FAST position and allow engine to reach

correct operating speed.

5. For Electric models: Set the throttle to the fast position, then pull up and

push forward on the start switch. Choke if needed.

SHUT DOWN

1. Release the drive clutch lever to disengage the drive.

2. Pull the throttle control all the way back to the STOP position.

Fig. 8

Fig. 9

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 8 840245_B_LO

VACUUM NOZZLE HEIGHT ADJUSTMENT

VACUUM NOZZLE DOOR ADJUSTMENT

The vacuum nozzle door adjusts for the maximum performance under various applications.

•With the handle fully back the nozzle is fully opened. This is ideal for turf application. (See Fig. 11)

•For hard surface applications, set the handle midway. (See Fig. 12)

•Close nozzle for use with the Optional Hose Kit (P/N 840116). This adjustment is ideal to use with the Hose Kit. (See

Fig. 13)

VACUUMING OPERATION

This machine is designed for vacuuming leaves, grass clippings, and other types of organic litter.

Debris mixed with cans, bottles, and small amounts of sand can be vacuumed; however, it is not this machine's primary purpose.

Vacuuming cans, bottles, and sand will affect the longevity of your machine. In dusty conditions it maybe necessary to purchase

Felt Bag Kit (P/N 840022).

Do not operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for damaged or

worn impeller, loose impeller bolt, loose impeller key, loose engine or lodged foreign objects. Note: See parts list for proper

impeller bolt torque specifications. (See page 13 Impeller removal).

CLEARING ACLOGGED NOZZLE

DISCONNECT spark plug wire before servicing unit.

1. Shut engine off and wait for impeller to stop completely.

2. Disconnect spark plug wire.

3. Wearing durable gloves, remove clog. Caution: clog may contain sharp materials.

4. Reconnect spark plug wire.

For maximum pickup:Adjust nozzle height as close to debris as possible, but

without blocking airflow into the nozzle. NOTE: Never bury nozzle into debris. The

vacuum nozzle is raised and lowered by turning the crank handle clockwise and

counter-clockwise. (See Fig. 10)

Fig. 10

Fig. 11

Fig. 12

Fig. 13

Fig. 14

1. Move shift lever (right side) to correct position (1, 2, or 3) for desired gear. (See Fig. 14)

2. Squeeze the drive clutch lever against the handle to engage the drive. (See Fig. 15)

Fig. 15

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 9 840245_B_LO

DEBRIS BAG

Debris bags are normal replaceable wear items.

Bag liners are available for use in various conditions where debris will be vacuumed. (See Bag Liner Accessories shown on pg 1).

MV650SPHDS Only – The dust sock provided will trap dust when vacuuming up dry debris only. The dust sock will need to be

removed periodically and the dust will need to be dumped out as it will accumulate over time. The dust sock can be easily

removed and reattached by separating it from the Velcro strip on the bag underneath.

DO NOT place bag on or near hot surface, such as engine.

Be sure engine has come to a complete stop before removing or emptying bag!

DUST SOCK CARE AND MAINTENANCE (MV650SPHDS only)

Purpose: The dust sock acts as a secondary filter lowering the amount of dust that escapes the bag.

Dust socks are to be used in dry and dusty conditions ONLY. Using the dust sock in damp or wet conditions may damage the

dust sock and decrease the effectiveness of the filter.

The dust sock may be installed by simply attaching the mating Velcro strips between the bag and the dust sock. Over time the

dust sock will begin to fill with dust during use. Periodically remove the dust sock, empty the loose dust out and clean the sock.

For a light clean, simply shake the sock, for a deep clean, see below. To remove the sock, simply separate the Velcro.

Dust Sock Care Information:

DO NOT STRIKE THE BAG WITH OR AGAINST OBJECTS DO NOT SNAG THE BAG

Dust Socks are normal replaceable wear items. Replacement P/N 840261

LIGHTLY CLEAN WITH COMPRESSED AIR ONLY, FROM THE OUTSIDE IN.

KEEP THE NOZZLE 6-12 INCHES FROM FABRIC

6”-12”

(152mm-

305mm)

*****TIPS*****

Frequently empty debris to prevent bag overloading with more weight than you can lift.

Many vacuums are used where dust is mixed with trash. Your unit can intermittently vacuum in dusty areas. However, following

these rules will help maintain your machine's ability to vacuum in dusty conditions:

•Run machine at idle to quarter throttle.

•Machine or pressure-wash debris bag if normal cleaning does not fully clean bag. Bag should be thoroughly dry before use.

Having one or more spare bags (P/N 840189) is a good way to reduce down time while dirty bags are being cleaned.

Felt Bag (P/N 840194) accessory is great when used in dusty conditions.

DO NOT GET WET

NOT FOR REPRODUCTION

MVSPOwner’sManual

Part No 840245 10 840245_B_LO

MAINTENANCE

PERIODIC MAINTENANCE

Periodic maintenance should be performed at the following intervals:

Maintenance Operation Every

Use Daily or

Every 5

Hours

Every 25

Hours Every 50

Hours Every 100-

150 Hours

Inspect for worn or damaged parts 

Check for excessive vibration 

Inspect for loose parts 

Clean debris bag 

Lubricate clutch control lever. NOTE: Use white lithium

grease or equivalent. (See Fig. 16) 

Lubricate height adjuster. (See Fig. 17) 

Check drive clutch cable tension 

Replace drive belts 

Apply lubricant on the zinc die cast barrel.

Apply lubricant on the thread.

Fig. 16

Fig. 17

COMMON REPLACEMENT PARTS

•Bag; P/N 840189 Original Equipment Replacement Bag.

•(MV650SPHDS) Bag P/N 840260

•(MV650SPHDS) Dust sock P/N 840261

•Skid; P/N 840041 Nozzle Wear Guard Skid.

•Drive Belt; P/N 840066 Original Equipment Replacement Belt.

HERE

NOT FOR REPRODUCTION

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Billy Goat Rasen- und Gartengeräte Handbücher

Billy Goat

Billy Goat DL1201L Bedienungsanleitung

Billy Goat

Billy Goat 440140 Bedienungsanleitung

Billy Goat

Billy Goat SC181HGEU Bedienungsanleitung

Billy Goat

Billy Goat MV650SPHEU Bedienungsanleitung

Billy Goat

Billy Goat F012507A Bedienungsanleitung

Billy Goat

Billy Goat SC120H Kurzanleitung

Billy Goat

Billy Goat QV550HSP Bedienungsanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat Grazor GZ400H Bedienungsanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat CR550HC Bedienungsanleitung

Billy Goat

Billy Goat F042508A Bedienungsanleitung

Billy Goat

Billy Goat OS901SPS Bedienungsanleitung

Billy Goat

Billy Goat MV650H PUSH Bedienungsanleitung

Billy Goat

Billy Goat MV650SPH Bedienungsanleitung

Billy Goat

Billy Goat SC180HEU Bedienungsanleitung

Billy Goat

Billy Goat HTR1803V Montageanleitung

Billy Goat

Billy Goat HTR1602V Montageanleitung

Billy Goat

Billy Goat TR1204L Bedienungsanleitung

Billy Goat

Billy Goat KD512HC Montageanleitung

Billy Goat

Billy Goat HTR1803VEU Montageanleitung

Billy Goat

Billy Goat HYDRO-DRIVE BC26 Bedienungsanleitung

Billy Goat

Billy Goat SC181H Bedienungsanleitung

Billy Goat

Billy Goat PL1801H Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung