Billy Goat MV650SPH Bedienungsanleitung

Part No 840245 1 Form No F050112D

BILLY GOAT ®MV650SPH and MV600SPE

Self-Propelled Vacuum Owner’s Manual

Accessories

Caster Kit

Hose Kit

Bag Liner Kit

Felt Bag Kit

Use on hard surface

for maneuverability.

For vacuuming hard

to reach areas.

To collect leaves,

thatch, and grass.

Use on all dusty

conditions.

P/N 840129

P/N 840116

P/N 840134

P/N 840194

Liner Kit

Interior housing liner

to decrease housing

wear

P/N 840201

Part No 840245 2 Form No F050112D

MV650SPH Self-Propelled Vacuum Owner’s Manual

CONTENTS

Specifications and Sound/Vibration ................................................................................................................... 3

Instruction Labels ............................................................................................................................................... 4

Assembly Instructions ........................................................................................................................................ 5-8

Operation ........................................................................................................................................................... 9-13

Maintenance and Troubleshooting.....................................................................................................................14-19

Illustrated Parts List ...........................................................................................................................................20-27

Go to http://www.billygoat.com for French-Canadian translations of the product manuals.

Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits

Form No F050112D 3 Part No 840245

MV650SPH Self-Propelled Vacuum Owner’s Manual

MV 650 SERIES SPECIFICATIONS

MV650SPH

MV600SPE

Engine Type

Honda GSV190AA1A

Briggs and Stratton 122MO70110F1

Horsepower

6.5 (4.85 kW)

6.25 (4.66 kW)

Fuel Capacity

1.6 qt (1.5 L)

1qt (.9L)

Oil Capacity

0.58 qt (0.54L)

0.63 qt (0.59L)

Unit Weight

179 lbs (81.2 kg)

Shipping Weight

208 lbs (94.3 kg)

Overall Dimensions

28” Wide x 62.5” Long x 45.5” High

Maximum Operating Slope

20o

In compliance with 2000/14/EEC

standards

103 dB(a) at 3320 rpm

Sound at operators ear

83 dB(a) at 3320 rpm

SOUND DATA

SOUND LEVEL 103 Dba at Operator Position

Sound tests were conducted in accordance with 2000/14/EC as well as ISO11094, and were performed on 5-17-2005 under the conditions listed

below.

Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit

for the sound power level for your model.

General Conditions: Sunny

Temperature: 66.2oF (19oC)

Wind Speed: 8.5 mph (13.7kph)

Wind Direction: South Southwest

Humidity: 59%

Barometric Pressure: 29.9” Hg (101.35kPa)

VIBRATION DATA

VIBRATION LEVEL 1.43g(14.00m/s2)

Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test

equipment. Tests were performed on 5-24-2006 under the conditions listed below.

General Conditions: Sunny

Temperature: 73.7oF (23.2oC)

Wind Speed: 8.05 mph (3.6m/s)

Wind Direction: South

Humidity: 83.5%

Barometric Pressure: 29.91” Hg (101.31 kPa)

Part No 840245 4 Form No F050112D

MV650SPH Self-Propelled Vacuum Owner’s Manual

INSTRUCTION LABELS

The labels shown below were installed on your BILLY GOAT ®MV Vacuum. If any labels are damaged or missing,

replace them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are

provided for convenience in ordering replacement labels. The correct position for each label may be determined by

referring to the Figure and Item numbers shown.

PN 400268

(See Figure 3 Item 55)

PN 890254

(See Figure 4 Item 162)

PN 840054

(See Figure 1 Item 34)

PN 400424

(See Figure 1 Item 11)

PN 810736

(See Figure 4 Item 174)

PN 890301

(See Figure 4 Item 163)

PN 900327

(See Figure 2 Item 118)

PN 840080

(See Figure 4 Item 175)

PN 500176

(See Figure 2 Item 120)

ENGINE LABELS CONTROLS

HONDA

Throttle Drive

P/N 840045 P/N 510127

Form No F050112D 5 Part No 840245

MV650SPH Self-Propelled Vacuum Owner’s Manual

MV Vacuum Assembly Drawing

Part No 840245 6 Form No F050112D

MV650SPH Self-Propelled Vacuum Owner’s Manual

PARTS LIST

Form No F050112D 7 Part No 840245

MV650SPH Self-Propelled Vacuum Owner’s Manual

ASSEMBLY INSTRUCTIONS

Your BILLY GOAT ®MV Vacuum was shipped in one carton, completely assembled except for the Hood/Upper

Handle Assembly. Mounting hardware for the Hood/Upper Handle Assembly is temporarily installed on the lower

handle and the Housing assembly.

READ all safety instructions before assembling unit.

TAKE CAUTION when removing the unit from the box since Hood/Upper Handle Assembly is

attached to the unit by cables.

Remove unit from carton. Make sure the following items that have been packed with unit:

Parts bag P/N 840187

Owner’s Manual, P/N 840245

General Safety and Warnings Manual, P/N 100294

Declaration of Conformity, P/N 840204

Honda Engine Manual

Warranty Card, P/N 400972

Ty-Wraps (2 ea)

Hardware Bag

DISCONNECT spark plug wire before assembling unit.

1. Attach hood assembly to the housing then hold in place

during the step 2.

NOTE: BE SURE ALL CABLES ARE ROUTED ON THE

UNDERSIDE OF THE HOOD AND HOUSING.

2. Install item #170 center bolt first when aligned with

a nut on the housing.

3. Attach rest of hood assembly to the housing using

corresponding hardware.

NOTE: You will have to insert the bolt/washer from

the inside by reaching through the hood.

- Two 7/16” wrenches.

1st

Part No 840245 8 Form No F050112D

MV650SPH Self-Propelled Vacuum Owner’s Manual

4. Attach upper handle brace to lower handle using

corresponding hardware. Then repeat this step on the

other side.

- Two 1/2” wrenches.

5. Attach rod end (164) to the nozzle door rod then

secure in place by tightening jam nut.

6. Attach nozzle door rod to the nozzle door using

corresponding hardware.

NOTE: It is easier to do this with nozzle door closed.

- Two 9/16” wrenches.

7. Attach rod end to rod (as in step 5).

8. Attach nozzle door rod to the lever with

nozzle door closed and lever in hose kit

position.

NOTE: Check to see nozzle door open and

close all the way (see page 15). Tighten or

loosen the rod end (164) for any

adjustments.

Two 9/16”

wrenches.

9. Install cable ty wraps.

10. Reconnect spark plug

wire.

11. Attach the bag.

HERE

Form No F050112D 9 Part No 840245

MV650SPH Self-Propelled Vacuum Owner’s Manual

OPERATION

OPERATOR CONTROLS

The operator’s position is at the rear of the machine between the handlebars. The operator should STAND in a position to allow

both handlebars to be grasped firmly, which allows sufficient leverage to steer the machine. Operator’s controls are shown below.

Operator Control Locations

1 Drive Clutch Lever 4 Throttle Control

2 Bag Latch 5 Drive Shifter Control

3 Pull Starter 6 Nozzle Door Adjuster

STARTING

CHECK engine oil level before operating machine.

1. Place equipment on a level, firm surface that is free of rocks or other debris.

2. Place throttle in START position.

Throttle

DO NOT START equipment without the debris bag in place.

Part No 840245 10 Form No F050112D

MV650SPH Self-Propelled Vacuum Owner’s Manual

3. Secure the unit with left hand at the handle then pull starter rope with right hand to start engine.

PULL STARTER CORD slowly until resistance is felt. Then pull cord rapidly to avoid kickback.

4. Move throttle control back to FAST position and allow engine to reach correct operating speed.

5. For Electric models: Set the throttle to the fast position, then pull up and push forward on the start switch.

Choke if needed

VACUUM NOZZLE HEIGHT ADJUSTMENT

FOR MAXIMUM PICKUP: Adjust nozzle height as close to debris as possible, but without blocking airflow into the nozzle. NOTE:

Never bury nozzle into debris. The vacuum nozzle is raised and lowered by turning the crank handle clockwise and counter-

clockwise.

SECURE UNIT AT

THE HANDLE

WITH LEFT HAND

DURING START

PULL ROPE

STARTER WITH

RIGHT HAND

On Electric

models only

Andere Handbücher für MV650SPH

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Billy Goat Rasen- und Gartengeräte Handbücher

Billy Goat

Billy Goat AE402 Bedienungsanleitung

Billy Goat

Billy Goat F601S Konfigurationshandbuch

Billy Goat

Billy Goat BG1002 Montageanleitung

Billy Goat

Billy Goat KVSP Bedienungsanleitung

Billy Goat

Billy Goat GZ401H Montageanleitung

Billy Goat

Billy Goat HTR1602V Montageanleitung

Billy Goat

Billy Goat DL1201L Bedienungsanleitung

Billy Goat

Billy Goat CR550HC Montageanleitung

Billy Goat

Billy Goat 440140 Bedienungsanleitung

Billy Goat

Billy Goat SC180HEU Bedienungsanleitung

Billy Goat

Billy Goat AEH Series Bedienungsanleitung

Billy Goat

Billy Goat PR550 Montageanleitung

Billy Goat

Billy Goat SC181H Bedienungsanleitung

Billy Goat

Billy Goat DL2500SMM Bedienungsanleitung

Billy Goat

Billy Goat GZ401H Bedienungsanleitung

Billy Goat

Billy Goat PL1802V Bedienungsanleitung

Billy Goat

Billy Goat CR551V Bedienungsanleitung

Billy Goat

Billy Goat QV550HSP Bedienungsanleitung

Billy Goat

Billy Goat AE1300HEU Bedienungsanleitung

Billy Goat

Billy Goat AET60 Bedienungsanleitung

Billy Goat

Billy Goat F1002SPV Bedienungsanleitung

Billy Goat

Billy Goat Quiet Vac SV50HR Montageanleitung

Billy Goat

Billy Goat PL1801H Bedienungsanleitung

Billy Goat

Billy Goat SC181H Bedienungsanleitung

Beliebte Rasen- und Gartengeräte Handbücher anderer Marken

Vertex

Vertex 1/3 HP Technische Daten

GHE

GHE AeroFlo 80 Bedienungsanleitung

Millcreek

Millcreek 406 Bedienungsanleitung

Land Pride

Land Pride Post Hole Diggers HD25 Bedienungsanleitung

Yazoo/Kees

Yazoo/Kees Z9 Commercial Collection System Z9A Programmierhandbuch

Premier designs

Premier designs WindGarden 26829 Bedienungsanleitung

Snapper

Snapper 1691351 Bedienungsanleitung

Mosquito Magnet

Mosquito Magnet Patriot Bedienungsanleitung

Perfect

Perfect BG2 Bedienungsanleitung

P.Lindberg

P.Lindberg LS2 Bedienungsanleitung

Gardena

Gardena Easy 1887 Bedienungsanleitung

Makita

Makita UM104D Bedienungsanleitung

AQUA FLOW

AQUA FLOW PNRAD Bedienungsanleitung

Tru-Turf

Tru-Turf RB48-11A Golf Green Roller Benutzerhandbuch

BIOGROD

BIOGROD 730710 Bedienungsanleitung

Land Pride

Land Pride RCF2784 Bedienungsanleitung

Makita

Makita UM110D Bedienungsanleitung

BOERBOEL

BOERBOEL Standard Floating Bar Gravity Latch Bedienungsanleitung