Bilt TRINITY TXK-0808 Bedienungsanleitung

OWNER’S MANUAL

TRINITY 100 QT STAINLESS STEEL COOLER

W/ SHELF & COVER

Model # TXK-0808

Important / Important / Importante

FOR QUICK & EASY 3D ASSEMBLY INSTRUCTIONS

POUR DES DIRECTIVES D’ASSEMBLAGE 3D RAPIDES ET FACILES

PARA INSTRUCCIONES DE ENSAMBLAJE RÁPIDAS Y SENCILLAS EN 3D

Intelligent Instructions

Directives intelligentes

Instrucciones Inteligentes

DOWNLOAD THE FREEAPP | TÉLÉCHARGERL’APPLICATION GRATUITE| DESCARGUE LA APLICACIÓN GRATUITA

PARTS LIST

Your TRINITY Stainless Steel Cooler w/ Shelf & Cover should include the following parts. Please inspect

box contents to ensure you have received all components.

If you are missing any parts, need assistance with assembly or have questions, please contact TRINITY

Customer Service: 800.985.5506 or customerservice@trinityii.com. Parts can also be requested online

via “Contact Us” section at www.trinityii.com.

You will need a Phillips screwdriver for assembly which is not provided.

TUB (1)

LID (1)

SHELF (1)

LEG (4)

SMALL

SCREW (10)

HANDLE (2)

LARGE

SCREW (12)

CAP CATCHER (1)

BOTTLE

OPENER (1)

DRAIN PLUG (1)

LOCKING

CASTER (2)

NON-LOCKING

CASTER (2)

WRENCH (1)

COVER (1)

ASSEMBLY INSTRUCTIONS

STEP 1

Align HANDLES (F) on each side of TUB (A).

Attach HANDLES (F) with LARGE SCREWS (G).

Make sure to tighten securely. HANDLES (F)

can be attached either angled up or down

based on your preference.

STEP 2

Turn TUB (A) upside down, and align LEGS

(D) with holes on bottom of TUB (A). Attach

LEGS (D) with SMALL SCREWS (E). Make sure

to tighten securely.

ASSEMBLY INSTRUCTIONS

STEP 3

Align holes in SHELF (C) with bottom of LEG (D),

making sure SHELF Lip is facing TUB (A). Screw

LOCKING CASTER (K) into bottom of LEG (D),

securing SHELF (C) in between. Please make sure

LOCKING CASTERS (K) are installed on the same

side. Screw NON-LOCKING CASTER (L) into

bottom of LEG (D) securing SHELF (C) in-

between. Repeat for the other NON-LOCKING

CASTER (L).

Tighten all CASTERS (K, L) with provided

WRENCH (M).

Use provided caster wrench to tighten

completely. Failure to do as instructed could

result in caster stem breaking.

STEP 4

Turn Cooler right-side up. Attach CAP

CATCHER (H) to TUB (A) by sliding it

downward, over metal notch. Attach BOTTLE

OPENER (I) to TUB (A) using SMALL SCREWS

(E).

ASSEMBLY INSTRUCTIONS

STEP 5

Unscrew DRAIN PLUG (J) assembly. Insert

DRAIN PLUG (J) through opening in TUB (A)

from the inside. Make sure rubber seal is on

the inside of TUB (A).

From the outside, slide washer on first, then

the second washer with chain attached, and

then screw on the nut. Be sure not to

overtighten. Once DRAIN PLUG (J) is in place,

screw on the cap.

Outside the tub

Inside the tub

STEP 6

Set LID (B) on top of TUB (A).

Clean inside of Cooler thoroughly before

use. B

ASSEMBLY INSTRUCTIONS

STEP 7

Unfold COVER (N) and put it onto assembled

cooler. Pull Velcro straps to secure COVER

(N).

Velcro straps

SERVICE PARTS LIST –TXK-0808

TRINITY Customer Service provides the following replacement parts:

Part Number Description Part Number Description

1) PBR-17-002-3317 Cooler Lid 9) ZSV-99-011-3010 Non-Locking Caster

2) AMA-05-005-0150 Lid Knob 10) PBR-03-028-3116 Shelf

3) XSV-01-010-0530 Knob Screw 11) PBR-04-022-1625 Leg

4) XST-18-015-3317 Cooler Tub 12) XSV-01-010-0416 Small Screw

5) XST-02-004-0001 Bottle Opener 13) CGL-02-003-0001 Drain Plug

6) XST-02-005-0002 Cap Catcher 14) XSV-05-001-0675 Handle

7) ZSV-99-012-3010 Locking Caster 15) XSV-01-010-0615 Large Screw

8) XXX-97-002-0007 Wrench 16) UBK-24-001-3519 Cover

WARNINGS

1. Read and understand all instructions. Failure to follow all instructions may result in injury

and/or damage.

2. The warnings, cautions, and instructions discussed in this manual cannot cover all

possible conditions or situations that may occur. The user must always be aware of their

environment and ensure that they use the product in a safe and responsible manner.

3. Use the provided caster wrench to tighten completely. Failure to do as instructed could

result in the caster stem breaking thereby causing the cooler to collapse.

4. Do NOT modify the product in any way. Unauthorized modification may impair the

function and/or safety of the product, and may affect the life of the product. Any

modifications will void product warranty.

5. Check for damaged parts. Before using this product, carefully check that all parts are in

good condition, and that the product will operate properly and perform its intended

function. Check for damaged parts and any other conditions that may affect the operation

of this product. Replace damaged or worn parts, and never use this product with a damaged

part.

6. Lift cooler tub by side handles ONLY.

7. Do NOT let children climb or play in the tub or on the shelf.

8. Do NOT overload the product.

9. Lock the casters when leaving cooler in stationary position.

10. Do NOT push cooler with cart on uneven surface. Cooler tub may detach from the cart and

casters may be loosened and damaged causing the cart to collapse.

11. Wood and laminate flooring can be scratched or dented. Ensure your flooring can bear the

weight of loaded product before rolling loaded product across your flooring.

Volume Capacity 25 gallons / 100 qt

Weight capacity per shelf (evenly distributed) 75 lb

Total weight capacity (evenly distributed) 275 lb

CARE AND MAINTENANCE

•Remember to drain remaining water and remove un-melted ice after use. Wipe dry for

storage.

•Avoid harsh, abrasive cleaners, and other corrosive chemicals.

•Do not use scouring pad for cleaning.

•Keep dry and avoid damp environments.

•Use a quality stainless steel cleaner and follow instructions that come with the cleaner.

Wipe ALONG the grain (NOT against).

•Cooler should not be left out unprotected in the elements. Keep cover on when cooler is

not in-use.

PRODUCT REGISTRATION

Thank you for purchasing a TRINITY Stainless Steel Cooler w/ Shelf & Cover. In order to register your

product and receive streamlined customer service, please fill out the following Product Registration

Form and (1) fax the form to 310.347.4134 (2) complete the Product Registration Form online at

www.trinityii.com or (3) scan and email the form to customerservice@trinityii.com. Include a copy of

your original receipt with your submission.

First Name: Last Name:

Address:

City: State: Zip Code:

Email Address: Phone:

Product Model #: TXK-0808 Purchase Date: / /

Location of Purchase:

Please rate the importance of each feature (1=least important; 10=most important)

Quality Price Size/Capacity Appearance Other

How did you hear about our product?

Magazine Ad Catalog Salesperson Word of Mouth

Internet Store Display Other

Marital Status: Single Married

Household Income: Below $50,000 $50,000-$150,000 $150,000+

Education: High School College Graduate School

Primary Residence: Own Rent

Comments/Suggestions:

Inhaltsverzeichnis

Andere Bilt Zubehör Handbücher

Bilt

Bilt Trinity TXK-0806 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung