BioLite Baselantern Bedienungsanleitung

Press

White Lantern

Press & Hold

To Dim White Lantern

Press & Hold

To Dim White Lantern

Single Panel

Red Night Mode

Press & Hold

To activate full Color

Spectrum control

RGB

1. Power Button

2. Lantern Light

4. Folding Legs

Components & Controls

5. Micro USB Cord

6. Micro USB Charge In Port

USB Charge Out Ports x2

SiteLight Control Button

SiteLight Ports x2

7800 / 12000 (XL) mAh

Rechargeable Battery

Activate Charging

Press 3 Seconds

SETUP

1. Prior to ﬁrst use, charge up your BaseLantern via Micro

USB. The LED battery life indicator will blink left-to-right

to show BaseLantern is charging and the 4 LEDs will

turn solid when the battery is full (approx. 5 hours / 8

hours XL).

2. BaseLantern features stainless steel folding legs that

raise your lantern and create a wider perimeter of light

(1.1)

. You can also utilize the legs for angled task-lighting

(1.2)

or hanging the lantern like a lightbulb

(1.3)

BaseLantern has 3 lighting modes that are accessible

through manual operation. To engage additional lighting

functionality, please download the BioLite BaseLantern

Mobile App

(See Section 5)

and follow setup instructions.

To change lighting modes, press power button in quick

succession (1 second) until you have reached desired setting.

LIGHTING

BaseLantern Manual Settings

USAGE TIPS:

1. When turning on, BaseLantern’s memory returns to

its last used lighting function. Simply press power

button in quick succession to reach desired setting.

2. LOCK MODE: To avoid accidental activation of

BaseLantern in transit, hold the power button for 3

seconds while it is OFF. Lantern will ﬂash, indicating it

is in lock mode. When you want to unlock it, hold

again for 3 seconds. It will ﬂash once to indicate it is

out of Lock Mode.

IMPORTANT: Read all instructions

and warnings before use.

Prior to First Use: DISABLE

DEMO MODE.

WARNING: BaseLantern contains

batteries. Keep away from heat. Store

in cool dry area when not in use.

Care & Maintenance: If BaseLantern

gets dirty, wipe down with damp

towel. The BaseLantern is weather

resistant, but not waterproof: do not

leave out in rain for prolonged period

of time and do not submerge in water.

Product Speciﬁcations:

Water Resistant: IPX4

Dimensions: 5.1 x 5.0 x 1.7 in (12.95 x 12.7 x

4.32 cm)

Weight: 1.30 lbs (590g) / 1.41 lbs (639g) XL

Inputs: Micro USB charge in

Outputs: USB charge out x2, SiteLight port x2

Burn Time: 54 LO, 5 HI / 78 LO, 7.5 HI XL

Lumens: 500 Lm

Battery: 7800 / 12000 XL mAh lithium-ion

In The Box: BaseLantern /

BaseLantern XL, Micro USB cord,

Quick Start Guide.

BaseLantern BaseLantern XL

1.1 1.2 1.3

To disable Demo Mode, hold the power

button for 10 seconds until the lantern

blinks twice. Alternatively, you may also

disable Demo Mode by plugging the

BaseLantern into any USB power source.

10 sec.

100%

Charge Out

Charge In

BaseLantern’s internal li-ion battery may be used for both lighting

and external charging to other devices via USB.

There are 4 LED lights on the side of your BaseLantern to

represent the power reserves of the internal battery. When your

battery is below 10% the ﬁrst LED on the left will begin ﬂashing;

your BaseLantern will enter Low Power Mode and will stop

oﬀering charge-out to external devices.

1. Uncouple SiteLights and extend SiteLight cord to desired

length. (3.1)

Note: BioLite SiteLights are sold separately from BaseLantern

To expand your outdoor lighting system with overhead lights,

connect BioLite daisy-chainable SiteLights to your

BaseLantern which features 2 SiteLite ports, allowing you set

up string lighting in two directions at once:

2. Plug SiteLight into BaseLantern SiteLight Port. (3.2)

3. Daisy-chain desired network of SiteLights together by

plugging subsequent SiteLight jacks into preceding

SiteLight port. (3.3)

4. To turn on and dim SiteLights manually, press SiteLight

button located next to SiteLight Ports on BaseLantern.

(3.4) You may control each SiteLight individually via their

manual buttons located on top of each light. (3.5)

5. To turn on and dim SiteLights remotely, please refer to

the BaseLantern mobile app.

BASELANTERN + SITELIGHTS

3.4 3.5

3.2

3.3

1. To charge devices, plug charging cord into USB charge-out

port located on side of BaseLantern. (4.1)

2. If BaseLantern is in OFF setting, press power button once to

activate charging. (4.2) You may then turn light panels oﬀ to

conserve battery while keeping devices charging.

3. BaseLantern features [2] USB charge-out ports allowing you to

charge two devices at once. Note: When charging two devices,

one port will charge at 2.1A while the second will charge at 1A.

1. Plug the included micro-USB cord into BaseLantern input

port. (4.3)

2. Connect to USB power source such as wall or car charger. (4.4)

4. When battery is fully charged, all 4 LEDs will be lit.

3. LED battery indicator lights will ﬂash sequentially from left to

right to indicate battery is charging. (4.5)

CHARGING

The BaseLantern features a free mobile app for iOS and Android.

This app enables you to activate sleep timers, proximity activation,

color settings, battery life feedback, remote dimming and several

other functions all from your smartphone.

Or visit the Apple or GooglePlay app store and search “BioLite”.

BIOLITE BASELANTERN MOBILE APP

4.1

4.2

4.3

4.4

4.5

3.1

BioliteEnergy.com/baselantern-app

Download at:

Full Color & Warmth Control

Automatic On/Oﬀ When In Range

Real Time Power Usage Stats

Lantern Eﬀects

Turn On, Oﬀ & Dim

Alarm & Timers

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

EU Compliance Statement - BioLite Inc. hereby declares that this device is in compliance with

the essential requirements and other relevent provisions of the R&TTE Directive. A copy of the

EU Declaration of Conformity is available online at bioliteenergy.com/euro-compliance.

BioLite’s EU representative is DSV Solutions Nederland BV, Tradeboulevard 4, Haven 528, 4761

RL Moerdijk, P.O. Box 6086, 4780 LX Moerdijk, The Netherlands.

CALIFORNIA PROPOSITION 65 WARNING: This product contains a chemical known to the State

of California to cause cancer and birth defects or other reproductive harm.

FCC ID: X8WBT600E

IC ID: 4100A-BT600E UN38.3

Problem Solution

BaseLantern cycles through lighting modes then shuts oﬀ. BaseLantern is in DEMO MODE. To deactivate, hold power button down on

BaseLantern for 10 seconds until BaseLantern blinks twice.

BaseLantern blinks twice but will not turn on. BaseLantern is in LOCK MODE. This is designed to prevent your light from

accidentally turning on while in transit. To unlock, hold power button down for 5

seconds until BaseLantern blinks twice.

BaseLantern color mode not on the color I want and I want to control it manually. Press and hold to cycle through colors and reach desired color.

BaseLantern not responding to Mobile App commands. Check to ensure bluetooth settings are on and that BaseLantern has been

paired with your phone. Check top left corner of mobile app to verify that

system is connected.

SiteLights are not working. Ensure that all SiteLights are ﬁrmly plugged into ports (often requires an extra

push) and individual SiteLites are all in manual ON position in order to be

controlled from mobile App.

TROUBLESHOOTING

WARRANTY

BioLite has a 1 year limited warranty. Should this product not function properly under

normal use within 1 year of purchase, contact BioLite or your local distributor for return

process information. BioLite alone will determine if the problem is due to a manufacturing

ﬂaw. If so, BioLite will repair or replace the unit at its discretion and send it to you, free of

charge. This warranty does not cover any damage or malfunction arising from misuse,

improper maintenance, negligence, normal wear and tear, or accident. Never alter the

BaseLantern in any way or use with any part or accessory not expressly approved by

BioLite. This warranty applies only to the original purchaser and proof of purchase is

required. All implied warranties required under law are limited to one year. BioLite shall

not be liable for any consequential or incidental damages whatsoever. BioLite shall not be

held liable if the product or defect herein causes damage or failure of other equipment.

This warranty gives you speciﬁc legal rights. You may also have other rights that vary from

state to state. Some states do not allow the exclusion or limitation of incidental or

consequential damages, or limitation or exclusion of implied warranties, so the above

exclusions or limitations may not apply to you.

For videos, FAQs, and more please visit BioLiteEnergy.com/Instructions

IMPORTANT: Read all instructions and

warnings before use.

WARNING: The SolarPanel 5+

contains a battery. Do not submerge

in water.

Care & Maintenance: If the SolarPanel 5+ gets

dirty, simply wipe away the dirt with a damp

cloth. The SolarPanel 5+ is weather resistant. Do

not leave out in rain for prolonged period of time

and do not submerge in water. Store in a cool

dry area when not in use.

Product Speciﬁcations: Dimensions: 10.12 x

8.19 x 0.94 in; 257 x 208 x 24 mm Weight: 13.76

oz/390g Inputs: Micro USB charge in Outputs:

USB charge out Power Output: 5 watts at peak

sun Cell Type: Monocrystalline Battery: 2200

mAh lithium-ion, 8 Wh storage

In the Box: SolarPanel 5+, USB Cable, Quick

Start Guide

Prior to First Use: The SolarPanel 5+

comes with an integrated battery,

allowing you to store power on the go.

For a head start on the trail, you can

pre-charge your SolarPanel 5+ before

heading out by plugging it in via

micro-USB to any power source such as

a wall outlet or computer USB port.

1. Battery & Charge Strength Indicator

2. Battery Status Button

3. High Eﬃciency Monocrystalline Panel

7. Micro USB Charge In

8. USB Cable

9. Corner Latches

Components & Controls

SETUP

1. To maximize power generation, place your SolarPanel 5+ in

direct sunlight: align the panel’s sundial so that the black dot’s

shadow is in the center of the axis. (1.1)

2. Stabilize the position of your panel with the integrated 360

degree kickstand: rotate in any direction for hanging, standing,

or stabilizing on uneven terrain. (1.2)

1. The SolarPanel 5+ provides 5 watts of usable electricity and

can safely charge devices via USB such as phones, headlamps,

lanterns, and the BioLite CookStove.

2. The Battery & Charge Strength indicator (2.1) is represented

by 4 LED lights. When all 4 LED lights are ﬂashing you are

generating maximum power from the sun.

3. The SolarPanel 5+ features an on-board 2200 mAh battery,

enabling you to charge your devices either in real time or

store your power for when you need it. Press the battery

status (2.2) button and the LED lights will temporarily turn

solid to display the fullness of the battery: if all 4 LEDs are

solidly lit, your battery is fully charged.

4. To charge a device using the SolarPanel 5+, plug the device into

the USB charge out port located in the orange bar on the

backside of your panel (2.3) and press the power button once.

BioLite has a 1-year limited warranty. Should this product not function properly under normal use within 1 year of purchase, contact BioLite or your local distributor for return process information. BioLite alone will determine if the problem is

due to a manufacturing ﬂaw. If so, BioLite will repair or replace the unit at its discretion and send it to you, free of charge. This warranty does not cover any damage or malfunction arising from misuse, improper maintenance, negligence,

normal wear and tear, or accident. Never alter the SolarPanel 5+ in any way or use with any part or accessory not expressly approved by BioLite. This warranty applies only to the original purchaser and proof of purchase is required. All implied

warranties required under law are limited to one year. BioLite shall not be liable for any consequential or incidental damages whatsoever. BioLite shall not be held liable if the product or defect herein causes damage or failure of other

equipment. This warranty gives you speciﬁc legal rights. You may also have other rights that vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation or exclusion of