Black Box JPM406A-R5 Bedienungsanleitung

Fiber adapter panel

with 6 fiber optic

connectors installed

Fiber optic cable

Fiber optic

connectors

Splice tray

(JPM440A, not

included)

Figure 2. The JPM406A-R5 with three fiber adapter panels visible (up to nine more

can be stacked beneath the visible ones, for a total of 12 adapter panels).

The fiber cable is routed through the splice tray,

then terminated via the fiber optic connectors.

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

TRADEMARKS USED IN THIS MANUAL

Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.

Kevlar is a registered trademark of E.I. du Pont de Nemours and Company.

PLEXIGLAS is a registered trademark of Roehm GmbH & CO.

Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

FEBRUARY 2009

JPM406A-R5

JPM418A-R4

Fiber Rackmount Cabinet

FIBER RACKMOUNT CABINET

1. Specifications

Construction: 16-gauge, cold-rolled steel

Size: JPM406A-R5: 5.25"H (3U) x 17"W x 11.5"D (13.3 x 43.2 x 29.2 cm);

JPM418A-R4: 3.5"H (2U) x 17"W x 11"D (8.9 x 43.2 x 27.9 cm)

Weight: JPM406A-R5: 17.2 lb. (7.8 kg); JPM418A-R4: 15.2 lb. (6.9 kg)

2. Overview

The JPM406A-R5 is 3U high, fits in a 19" or 23" rack, and supports 12 adapter panels. (Each adapter panel has

up to 12 connectors, for a maximum of 144 ports.) It provides termination for optical cables on the premises or

in a central office. The JPM418A-R4 is only 2U high and supports six adapter panels; it also fits in a 19" or

23" rack. (Each adapter panel has up to 12 connectors, for a maximum of 72 ports.)

The Fiber Rackmount Cabinets are constructed of 16-gauge cold-rolled steel, and they’re compact and rugged

enough for commercial applications. Its powder-coated finish is corrosion resistant.

The cabinet has a front door, a rear door, and outside and inside plant cable entry/exit holes. Up to 3 splice

trays (JPM440A, not included) can be mounted in the chassis. One splice tray accepts four fusion (for single-

mode fiber) or four mechanical (for multimode fiber) splice modules.

Two cable-entry holes at the right and left on the cabinet’s rear and two patch cord exit holes in the front

bottom make cable installation easy.

Your package should include the following items. If anything is missing or damaged, contact Black Box at

724-746-5500.

• (1) Fiber Rackmount Cabinet • (1) Kevlar®clamp (installed)

• (4)

12⁄24 cup-head screws • (4) 10⁄32 cup-head screws

• (30) 3" (7.6-cm) cable ties • (4) 4" (10.2-cm) cable ties

• (6) rectangular plastic cable holders • (3) pairs of black spool rings (installed) for

JPM406A-R5 or (2) pairs of black spool rings (installed)

• (1) “danger” sticker for JPM418A-R4

• (1) locking PLEXIGLAS®door • (2) mounting brackets

• (4) silver screws for mounting brackets • (1) set of keys

• (4) washers for mounting brackets • (1) users’ manual

• (1) identification label sticker

FIBER RACKMOUNT CABINET

3. Installation

1. Attach the two mounting brackets to the cabinet, and secure them with the four silver screws and four

washers.

2. Using the 10⁄32 or 12⁄24 cup-head screws, mount the Fiber Rackmount Cabinet in a 19" or 23" rack.

3. Open the back door by pulling, then releasing, the locking buttons.

4. Route multi-strand fiber cable (not included) through the rectangular openings on the cabinet’s top,

bottom, or through the rubber grommets on the side.

5. Use the Kevlar clamp to secure the multi-strand fiber to the cabinet. Loosen the Kevlar clamp’s two screws

and wrap the cable’s Kevlar yarn around the clamp. Tighten the screws to secure the multi-strand fiber to

the cabinet.

NOTE

The Kevlar clamp can be mounted on the cabinet’s rear left or right.

6. Install the cabinet’s PLEXIGLAS front door.

7. Pull out the tray (see Figure 1) to install a fiber adapter and splice tray (if needed). Up to 12 fiber adapters

can be installed in the JPM406A-R5; up to six can be installed in the JPM418A-R4.

8. Install the connectors on the multi-strand fiber cable, or make the splice as needed. (See Figure 2 for a

typical cable installation.) Connect the fiber cable to the fiber adapters.

9. Use the included rectangular plastic cable holders, cable ties, and black spool rings to hold the cable in

place inside the cabinet.

10. Slide the tray back into place inside the cabinet.

11. Close the cabinet’s rear door.

12. Snap in the 1" (2.5-cm) rectangular cable holder in the front of the inside tray. This helps organize the

fiber patch cables used in the front of the cabinet.

13. Close the cabinet’s front PLEXIGLAS door. Push the buttons in, then release, to lock.

14. Attach the “danger” sticker to the cabinet’s rear or top panel.

15. Attach the identification label sticker to the cabinet’s rear door.

Figure 1. Fiber Rackmount Cabinet with tray pulled out.

Kevlar clamp

installed on the

side rear corner

Rectangular cable

holders

Inside

tray

Rectangular

openings

Splice tray

Install the fiber

adapters here

Dieses Handbuch passt für folgende Modelle

Andere Black Box Gehäuse Handbücher

Black Box

Black Box Elite EC38U3036 Bedienungsanleitung

Black Box

Black Box NEMA 12 Bedienungsanleitung

Black Box

Black Box USB 2.0 to SATA Enclosure Bedienungsanleitung

Black Box

Black Box ClimateCab RM1000A Bedienungsanleitung

Black Box

Black Box 525068 Bedienungsanleitung

Black Box

Black Box JPM440A Bedienungsanleitung

Black Box

Black Box RM2000A Bedienungsanleitung

Black Box

Black Box EC24U3032 Bedienungsanleitung

Black Box

Black Box JPM406A-R3 Bedienungsanleitung

Black Box

Black Box JPM402A-R3 Bedienungsanleitung

Black Box

Black Box RMT355A-R2 Bedienungsanleitung

Black Box

Black Box EWM12U242418-R2 Bedienungsanleitung

Black Box

Black Box JPM397A Bedienungsanleitung

Black Box

Black Box SOHO JPM1110A Bedienungsanleitung

Black Box

Black Box IE PowerTray 18-Slot AC Bedienungsanleitung

Black Box

Black Box JPM399A Bedienungsanleitung

Black Box

Black Box JPM427A Bedienungsanleitung

Black Box

Black Box JPM401A-R2 Bedienungsanleitung

Black Box

Black Box RMT35X Series Bedienungsanleitung

Black Box

Black Box Elite EWM12U242418-R3 Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung