Black Box RM2000A Bedienungsanleitung

1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746

Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)

FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746

Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018

Web site: www.blackbox.com • E-mail: [email protected]

CUSTOMER

SUPPORT

INFORMATION

JUNE 2003

RM2000A RM2050A RM2010

RM2020A RM2060A RM2011

RM2030A RM2070A RM2012

RM2040A RM2080A RM2015

RM488

Performance Server Cabinets

and Accessories

TRADEMARKS USED IN THIS MANUAL

Any trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.

PERFORMANCE SERVER CABINETS AND ACCESSORIES

Contents

Chapter Page

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Performance Server Cabinets (RM2000A–RM2080A) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Tool-Less Shelf (RM2010) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Fan Trays (RM2011 and RM2012) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2. Performance Server Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

2.2 Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

3. Tool-Less Shelf (RM2010) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

4. 440-CFM Fan Tray (RM2011) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

5. Roof-Mounted Fan Tray (RM2012) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

6. Interconnect Hardware (RM2015). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

7. Cage Nuts (RM488) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

CHAPTER 1: Specifications

1. Specifications

1.1 Performance Server Cabinets (RM2000A–RM2080A)

Material: Sidewalls and frame: 16-gauge steel; Doors: 14-gauge steel

Overall Height: 78.7" (42U, 200 cm)

Interior Mounting Height: 75.3" (191.3 cm)

Exterior Width: 23.6" (60 cm) without sidewalls; 23.9" (60.7 cm) with sidewalls

Interior Width: 20.2" (51.3 cm)

Exterior Depth: RM2000A, RM2020A, RM2050A, RM2060A: 35.4" (89.9 cm); RM2030A, RM2040A, RM2070A,

RM2080A: 39.4" (100.1 cm)

Interior Depth: RM2000A, RM2020A, RM2050A, RM2060A: 31.6" (80.3 cm); RM2030A, RM2040A, RM2070A,

RM2080A: 35.5" (90.2 cm)

Side Walls: RM2000A, RM2030A, RM2050A, RM2070A: No; RM2020A, RM2040A, RM2060A, RM2080A: Yes

Weight: RM2000A, RM2050A: 220 lb. (99.8 kg); RM2020A, RM2060A: 300 lb. (136.1 kg);

RM2030A, RM2070A: 260 lb. (117.9 kg); RM2040A, RM2080A: 340 lb. (154.2 kg)

1.2 Tool-Less Shelf (RM2010)

Capacity: 150 lb. (68 kg)

Construction: 16-gauge steel

Size: 17.3"W x 23.6"D (43.9 x 59.9 cm)

Weight: 11 lb. (5 kg)

1.3 Fan Trays (RM2011 and RM2012)

CFM: RM2011: 440; RM2012: 300

Construction: 16-gauge steel

Fans: RM2011: (2) 6" (15.2 cm); RM2012: (3) axial

Noise: RM2011: 59 dB; RM2012: 48 dB

Power: 115 VAC, 60 Hz, 51 watts

Size: RM2011: 19.8"H x 19.5"W x 2.6"D (50.3 x 49.5 x 6.6 cm);

RM2012: 2.4"H x 20.1"W x 6"D (6.1 x 51.1 x 15.2 cm)

Weight: RM2011: 11 lb. (5 kg); RM2012: 7 lb. (3.2 kg)

PERFORMANCE SERVER CABINETS AND ACCESSORIES

2. Performance Server Cabinets

2.1 Introduction

The Performance Server Cabinets are versatile modular rack cabinets that can accommodate a wide variety of

equipment. They contain standard 19" front and rear server-type rails with standard installation-hole spacing.

The RM2000A, RM2020A, RM2030A, and RM2040A have fully perforated front and rear mesh doors for

airflow. The RM2050A, RM2060A, RM2070A, and RM2080A have a polycarbonate front door with a peripheral

perforation around it to allow for airflow and a fully perforated rear mesh door for airflow. All eight models

have a fully perforated roof with four round cable-entry cutouts measuring 4" (10.2 cm) in diameter. All models

also have four installed leveling feet and Ergoform-S door handles with pushbutton lock inserts.

There are four Performance Server Cabinets with perforated front and rear mesh doors:

• Two models measure 78.7"H x 35.4"D (200 x 90 cm), with sidewalls (product code RM2020A) or without

(RM2000A).

• Two models measure 78.7"H x 39.4"D (200 x 100 cm), with sidewalls (product code RM2040A) or without

(RM2030A).

The models without sidewalls measure 23.6" (60 cm) wide. Those with sidewalls measure 23.9" (60.7 cm) wide.

There are four Performance Server Cabinets with a polycarbonate front door with a peripheral perforation

around it to allow for airflow and a fully perforated rear mesh door:

• Two models measure 78.7"H x 35.4"D (200 x 90 cm), with sidewalls (product code RM2060A) or without

(RM2050A).

• Two models measure 78.7"H x 39.4"D (200 x 100 cm), with sidewalls (product code RM2080A) or without

(RM2070A).

The models without sidewalls measure 23.6" (60 cm) wide. Those with sidewalls measure 23.9" (60.7 cm) wide.

2.2 Installation

Your Performance Server Cabinet should include the following:

• (50) captive nuts

• (50) screws

• (4) caps that can fit in the grommet material of the cable-entry cutouts in the roof

• (2) keys; these will be taped to the side of the cabinet

• This users’ manual

CHAPTER 2: Performance Server Cabinets

When you place the cabinet, use the leveling feet to make sure that it is completely level both back to front and

side to side.

The cabinet doesn’t require assembly itself, although there are several accessories that can be installed in it.

Optional accessories include a Tool-Less Shelf (RM2010) and both door-mounted (RM2011) and roof-mounted

(RM2012) fan trays. You can also use Interconnect Hardware (RM2015) to join two cabinets together.

As you install devices in the cabinet, be aware that there are copper-coated grounding terminals welded to the

roof and to the bottom of the sidewalls (on the cabinets with sidewalls). These are covered with plastic caps to

protect them during the factory painting process. To ground a device to one of these terminals, remove the

terminal’s cap. Run a ground wire with a ring lug from the device to the terminal. Use an M8 nut and washers

to secure the lug to the terminal.

To open the cabinet’s doors, first slide the upper part of the handle (the plastic shield with the Black Box logo

on it) upward to expose the button. If the cabinet is unlocked, press the button; the lower part of the handle

will pop out so it can be grasped. If the cabinet is locked, insert the key and turn it to release the handle. The

lower part of the handle can then be turned toward the inside of the cabinet to open the door. When you close

the door, press the lower part of the handle back against the door until it clicks into place, lock the door (if

necessary), and slide the upper part of the handle back down over the button.

PERFORMANCE SERVER CABINETS AND ACCESSORIES

3. Tool-Less Shelf (RM2010)

Figure 3-1. Tool-Less Shelf.

The Tool-Less Shelf for Performance Server Cabinets supports equipment weighing up to 150 lb. (68 kg). Its

support surface measures 17.3"W x 23.6"D (43.9 x 59.9 cm), and its rear mounting arms extend to give the shelf

a total front-rail-to-rear-rail depth of up to 35.5" (90.2 cm). It doesn’t require any additional equipment for

installation. To install the Tool-Less Shelf in a Performance Server Cabinet, take the following steps:

1. Make sure that all the shelf’s locking pins are retracted. Insert the shelf in the cabinet at an angle until the

mounting tabs have cleared the front rails.

Figure 3-2. Inserting the shelf in the cabinet.

CHAPTER 3: Tool-Less Shelf (RM2010)

2. Straighten the shelf back to horizontal as you move it farther into the cabinet enclosure.

Figure 3-3. Straightening the shelf to horizontal.

3. Insert the shelf’s front mounting tabs in the cabinet’s front rails, making sure that the shelf is level from

side to side.

Figure 3-4. Front mounting tabs.

4. Extend the shelf’s rear mounting arms into the cabinet’s rear rails.

Figure 3-5. Rear mounting arms.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Black Box Gehäuse Handbücher

Black Box

Black Box IE PowerTray 18-Slot AC Bedienungsanleitung

Black Box

Black Box SOHO JPM1110A Bedienungsanleitung

Black Box

Black Box RMT35X Series Bedienungsanleitung

Black Box

Black Box EWM12U242418-R2 Bedienungsanleitung

Black Box

Black Box USB 2.0 to SATA Enclosure Bedienungsanleitung

Black Box

Black Box JPM402A-R3 Bedienungsanleitung

Black Box

Black Box ClimateCab RM1000A Bedienungsanleitung

Black Box

Black Box JPM401A-R2 Bedienungsanleitung

Black Box

Black Box NEMA 12 Bedienungsanleitung

Black Box

Black Box JPM440A Bedienungsanleitung

Black Box

Black Box RMT355A-R2 Bedienungsanleitung

Black Box

Black Box Elite EC38U3036 Bedienungsanleitung

Black Box

Black Box 525068 Bedienungsanleitung

Black Box

Black Box JPM397A Bedienungsanleitung

Black Box

Black Box JPM406A-R3 Bedienungsanleitung

Black Box

Black Box EC24U3032 Bedienungsanleitung

Black Box

Black Box Elite EWM12U242418-R3 Bedienungsanleitung

Black Box

Black Box JPM427A Bedienungsanleitung

Black Box

Black Box JPM406A-R5 Bedienungsanleitung

Black Box

Black Box JPM399A Bedienungsanleitung

Beliebte Gehäuse Handbücher anderer Marken

SilentiumPC

SilentiumPC Armis AR5 Handbuch

Pulsar

Pulsar 17/TRP80/DSPR Bedienungsanleitung

Thermaltake

Thermaltake V150 TG Bedienungsanleitung

MSI

MSI MPG SEKIRA 500X Bedienungsanleitung

Antec

Antec Dark fleet DF-10 Bedienungsanleitung

Peavey

Peavey DS 1502 Bedienungsanleitung

D-Link

D-Link ShareCenter Pro DNS-1550-04 Bedienungsanleitung

Rosewill

Rosewill RX82-U(JBOD) Bedienungsanleitung

QNAP

QNAP SAS JBOD CLI 1.0 Bedienungsanleitung

GAMDIAS

GAMDIAS Talos P1 Bedienungsanleitung

Auvs

Auvs KR615 Bedienungsanleitung

Digitus

Digitus DA-71114 Bedienungsanleitung

CommScope

CommScope FDH 3000 Bedienungsanleitung

FS FHD-FWME4 Bedienungsanleitung

JBL

JBL CS1215T Bedienungsanleitung

Pulsar

Pulsar ARAD-S4 Bedienungsanleitung

Pulsar

Pulsar AWO454 Bedienungsanleitung

NewerTech

NewerTech Voyager S3 Bedienungsanleitung