Black Box FaxReceiver MC200A Bedienungsanleitung

Andere Handbücher für FaxReceiver MC200A

3

Inhaltsverzeichnis

Andere Black Box Empfänger Handbücher

Black Box

Black Box AC155A-R3 Bedienungsanleitung

Black Box

Black Box MediaCento UVX-HDMI-POE-RX Bedienungsanleitung

Black Box

Black Box ACS4001A-R2-R Bedienungsanleitung

Black Box

Black Box FiberPath AC444A Bedienungsanleitung

Black Box

Black Box VX1000 Series Bedienungsanleitung

Black Box

Black Box EMERALD EMD5004-R Bedienungsanleitung

Black Box

Black Box CAT5 Shielded Twisted Pair (STP) Patch Cable Bedienungsanleitung

Black Box

Black Box ServSwitch Agility ACR1000A Bedienungsanleitung

Black Box

Black Box AC155A-R2 Bedienungsanleitung

Black Box

Black Box AC155A Bedienungsanleitung

Black Box

Black Box MediaCento VX-HDMI-4K-TX Bedienungsanleitung

Black Box

Black Box AC3003A-NEC Bedienungsanleitung

Black Box

Black Box AVX-VGA-TP-TX Bedienungsanleitung

Black Box

Black Box InvisaPC Bedienungsanleitung

Black Box

Black Box ME190A Bedienungsanleitung

Black Box

Black Box IC454A Bedienungsanleitung

Black Box

Black Box MediaCento AVX-DVI-IP-TA Bedienungsanleitung

Black Box

Black Box FaxReceiver MC200A Bedienungsanleitung

Black Box

Black Box AC1140A Bedienungsanleitung

Black Box

Black Box MEDIACENTO IPX 4K Bedienungsanleitung

Black Box

Black Box MediaCento VSPX-HDMI1X4-TX Bedienungsanleitung

Black Box

Black Box ME806A Bedienungsanleitung

Black Box

Black Box Fiber Link-Transmitter Bedienungsanleitung

Black Box

Black Box AC1063A-R2 Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung

FaxReceiver MC200A

QuickStart FaxConfig Utility

INTRODUCTION: This is the QuickStart procedure for the FaxReceiver MC200A.

The procedure is to

connect the device, check the L Ds, send a test fax and make certain it comes back in email.

1.

INSERT THE MODEM CARD – Insert the modem card into the TOP slot.

2.

CONNECT THE FAXRECEIVER MC200A TO THE ETHERNET NETWORK - Insert your

thernet cable into the RJ-45 LAN port of the FaxReceiver MC200A.

3.

CONNECT THE MODEM CABLE – Connect the modem cable from the modem card to the

telephone wall outlet.

NOTE: If you are connecting in with another fax machine, make certain that it has the number of

rings to answer after set to a high number.

4.

CONNECT THE POWER and wat h the LEDs.



After 1 second, the Yellow Link L D indicates that the thernet network connection is up.



After ABOUT 5 seconds, the Green RX L D will blink when the router receives data from the

thernet network.



After about 10 seconds the Red TX L D will blink when the router transmits data to the

thernet network.

5. CONFIGURE THE UNIT –

On the thernet PC, double-click on the FaxConfig utility to start it.

The default IP Address is 11.22.33.44. Click on it, and then click on the Properties button.

6. SET UP TCP/IP –

Set the parameters for the IP Address, Subnet Mask, Default Gateway, DNS Servers, and Mail SMTP

Address. You can also change or add Time Server addresses.

7. SETUP Email Settings –

The Mailserver IP Port is usually not changed.

Mailserver Login Name – Often this is an email address. When a fax is received in the email box,

it will come from this user. Max 58 characters.

Mailserver Login Password – This is the password for the above email account. There is a

maximum of 58 characters. NOT : passwords are case-sensitive.

Reply e-mail Address – This is where e-mail replies to a received fax email would go to.

Reply Name – This is where the email will show as coming from.

Destination e-mail Address(es) - This is where the email(s) will be sent. This can be the same as

item 2) or it may be an alias set up to forward to multiple users. Max 80 characters. Put each

address on a separate line.

8. SETUP Fax Settings –

The Fax Reply ID, Fax Number, Company Name, and Fax Lo ation parameters are not

required.

The S aling Per entage should be (10-150 in increments of 5).

Answer Delay is used if you are daisy-chaining to a real fax machine. Set to a number of rings.

Time Zone Offset is the offset from UT. If you are in Greenwich, ngland, this number will be 0. If

your time zone is east of Greenwich, ngland), the number is positive. If your time zone is west of

GMT, the number is negative. For ST, use –5, CST –6, MST –7, PST –8, AKST –9, and HAST –10.

9. Telnet –

These settings do not usually change.

10. SEND A TEST FAX.

11. MAKE CERTAIN THAT YOU RECEIVED THE FAX.

CUSTOMER SUPPORT INFORMATION

Order toll-free in the US: Call 877-877-BBOX (outside US call 724-746-5500)

FR Technical Support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746.

Mailing address: Black Box Corp, 1000 Park Drive, Lawrence, PA 15055-1018.

Web site: www.blackbox.com -mail: in[email protected]om.

© Copyright 2006 Black Box Corporation.

All rights reserved.