BLAUBERG Sileo DC 100 Bedienungsanleitung

USER’S MANUAL

Sileo DC 100

AXIAL FAN

CONTENTS

Delivery set............................................................................................................................................................................................................................................. 6

Brief description .................................................................................................................................................................................................................................. 6

Operation guidelines ....................................................................................................................................................................................................................... 6

Designation key................................................................................................................................................................................................................................... 7

Installation and set-up..................................................................................................................................................................................................................... 7

Fan options............................................................................................................................................................................................................................................. 8

Fan setup ................................................................................................................................................................................................................................................. 8

Maintenance.......................................................................................................................................................................................................................................... 10

Storage and transportation regulations............................................................................................................................................................................... 10

Manufacturer’s warranty................................................................................................................................................................................................................ 11

READ THE USER’S MANUAL CAREFULLY BEFORE PROCEEDING WITH INSTALLATION WORKS.

COMPLIANCE WITH THE MANUAL REQUIREMENTS ENSURES RELIABLE OPERATION AND LONG

SERVICE LIFE OF THE UNIT.

KEEP THE USER’S MANUAL AVAILABLE AS LONG AS YOU USE THE UNIT. YOU MAY NEED TO RE-

READ THE INFORMATION ON THE PRODUCT SERVICING.

This user’s manual is a main operating document intended for technical, maintenance, and operating staﬀ.

The manual contains information about purpose, technical details, operating principle, design, and installation of the

Sileo DC 100 unit and all its modiﬁcations.

Technical and maintenance staﬀ must have theoretical and practical training in the ﬁeld of ventilation systems and should

be able to work in accordance with workplace safety rules as well as construction norms and standards applicable in the

territory of the country.

The information in this user’s manual is correct at the time of the document’s preparation.

The Company reserves the right to modify the technical characteristics, design, or conﬁguration of its products at any time

in order to incorporate the latest technological developments.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means in any

information search system or translated into any language in any form without the prior written permission of the Company.

Disconnect the unit from power supply prior to any connection, servicing, maintenance, and repair

operations.

Only qualied electricians with a work permit for electrical units up to 1000 V are allowed

for installation and maintenance. The present user’s manual should be carefully read

before beginning works.

• Single-phase power mains must comply with the acting local electrical norms and standards.

• Fixed electrical wiring must be equipped with an automatic circuit breaker.

• The unit must be connected to power mains through a QF automatic circuit breaker integrated

into the ﬁxed wiring system. The gap between the circuit breaker contacts on all poles must be

not less than 3 mm. Check the unit for any visible damages of the impeller and the casing before

starting installation. The casing internals must be free of any foreign objects that can damage the

impeller blades.

• While mounting the unit, avoid compression of the casing! Deformation of the casing may result

in the motor jam and noisy operation. Misuse of the unit and any unauthorised modiﬁcations are

not allowed.

• Take steps to prevent ingress of smoke, carbon monoxide, and other combustion products into

the room through open chimney ﬂues or other ﬁre-protection devices. Suﬃcient air supply must

be provided for proper combustion and exhaust of gases through the chimney of fuel burning

FOLLOW THE USER’S MANUAL REQUIREMENTS TO ENSURE DURABLE AND

TROUBLE-FREE OPERATION OF THE UNIT.

THE PRODUCT MUST BE DISPOSED SEPARATELY AT THE END OF ITS SERVICE LIFE.

DO NOT DISPOSE THE UNIT AS UNSORTED MUNICIPAL WASTE.

equipment to prevent back drafting. Transported air must not contain any dust or other solid

impurities, sticky substances, or ﬁbrous materials.

• Do not use the unit in a hazardous or explosive environment containing spirits, gasoline,

insecticides, etc.

• Do not close or block the intake or extract vents in order to ensure the eﬃcient air ﬂow.

• Do not sit on the unit and do not put objects on it.

• The unit is allowed to be used by children aged from 8 years old and above and persons with

reduced physical, sensory, or mental capabilities or no experience and knowledge provided that

they have been given supervision or instruction regarding safe use of the unit and understand

the risks involved.

• Do not allow children to play with the unit.

DELIVERY SET

Fan 1 pc.

Screws and dowels 4 pcs.

Plastic screwdriver (only for the models with a timer) 1 pc.

User’s manual 1 pc.

Packing box 1 pc.

BRIEF DESCRIPTION

Sileo DC 100 is an axial fan for extract ventilation of small and medium-sized domestic spaces heated during the cold season.

The fan ﬁts 100 mm air ducts. The fan is equipped with a back valve to prevent back air ﬂow during the fan standby.

OPERATION GUIDELINES

The fan is connected to 220...240 V/50 (60) Hz or 12 V/50 Hz single-phase AC mains depending on the model and is designed

for continuous operation without disconnection from the electric mains. The air ﬂow direction must match the arrow on

the fan casing.

Ingress protection rating against access to hazardous parts and water ingress is IP45.

The fan is suitable for operation at ambient temperatures ranging from +1 °C to + 45 °C.

The fan is rated as a Class II electrical appliance (220-240 V/50 (60) Hz).

DESIGNATION KEY

INSTALLATION AND SET-UP

The fan can be mounted to the ceiling or to a wall with air extraction into a ventilation shaft or a matching diameter round

air duct (Fig. 2).

Mounting conﬁgurations with direct air discharge upwards are not allowed (Fig. 2).

The fan installation steps are as follows:

step 1 — power oﬀ the electric mains and make sure that it is completely de-energised (Fig. 3)

step 2 — run the power cable to the vent hole (Fig. 4)

step 3 — remove the face panel of the fan. Then remove the lid which protects the circuit board (Fig. 5)

step 4 — mark and drill fan mounting holes and mount the fan (Fig. 6-8)

step 5 — connect the fan to the electric mains according to the connections diagram (Fig. 12)

step 6 — replace the lid which protects the circuit board (Fig. 9) and the face panel on the fan casing (Fig. 10)

step 7 — apply electric power to the fan (Fig. 11)

Connection diagram terminal key:

L— phase (220-240 V only) S— external switch

N— neutral (220-240 V only) QF — automatic switch

LT (ST) — timer control circuit

Sileo DC 100 X

Additional options:

S: cord-operated switch

Т: deactivation delay timer

Н: humidity sensor and deactivation delay timer

IR: motion sensor and deactivation delay timer

Outlet duct diameter [mm]

DC: direct current electric motor

FAN OPTIONS

Sileo DC 100 (S)Т — fans are equipped with a deactivation delay timer. The timer activates upon control voltage

application to input terminal LT by an external switch (e.g. indoor light switch). Upon control voltage removal the fan

continues to operate for the period of time set by means of a DIP switch.

ST models are equipped with a cord-operated switch.

Sileo DC 100 IR — fans are equipped with a motion sensor and a deactivation delay timer. The fan operates in one of the

four modes set by a DIP switch.

Sileo DC 100 (S)Н — fans are equipped with a humidity sensor and a deactivation delay timer. The fan operates in one

of the four modes set by a DIP switch.

SH models are equipped with a cord-operated switch.

THE TIMER CIRCUIT IS LIVE.

MAKE SURE THE FAN IS DISCONNECTED FROM POWER SUPPLY.

DO NOT USE A METAL SCREWDRIVER, KNIFE, ETC. FOR ADJUSTMENT

OPERATIONS NOT TO DAMAGE THE CIRCUIT BOARD.

FAN SETUP

The fan is set up by changing the DIP switch position. To access the DIP switch take oﬀ the face panel and remove the

rubber plug (Fig. 13). The fan is supplied with a special plastic screwdriver to toggle the DIP switch without damaging its

components.

Sileo DC 100 (S)Т

Operation mode Speed

Operation via an external

switch Continuous fan operation Low fan speed High fan speed

Deactivation delay timer

Timer oﬀ 5 minute delay 15 minute delay 30 minute delay

Sileo DC 100 (S)Н, Sileo DC 100 (S)IR

Operation mode

Upon sensor actuation or

switch operation the fan

switches to low speed.

Upon sensor actuation or

switch operation the fan

switches to high speed.

The fan continuously

operates at low speed. Upon

sensor actuation or switch

operation the fan switches

to high speed.

The fan is disabled. Upon

sensor actuation the fan

switches to low speed.

Upon sensor actuation while

the fan is enabled the fan

switches to high speed.

Deactivation delay timer

Timer oﬀ

The delay for Sileo DC (S)IR is

30 seconds.

5 minute delay 15 minute delay 30 minute delay

MAINTENANCE

The fan must undergo technical maintenance at least every 6 months.

Maintenance steps:

• power oﬀ the fan and make sure that it is completely de-energised (Fig. 14)

• remove the face panel and clean the fan with a soft dry cloth or a brush (Fig. 15)

• rinse the face panel with tap water (Fig. 16)

• wipe the fan surfaces dry

• replace the face panel onto the fan

• re-connect the electric power (Fig. 17)

WARNING! Avoid water dripping on the electric components.

• Store the unit in the manufacturer’s original packaging box in a dry closed ventilated premise with temperature range

from +5 ˚С to +40 ˚С and relative humidity up to 70 %.

• Storage environment must not contain aggressive vapours and chemical mixtures provoking corrosion, insulation, and

sealing deformation.

• Use suitable hoist machinery for handling and storage operations to prevent possible damage to the unit.

• Follow the handling requirements applicable for the particular type of cargo.

• The unit can be carried in the original packaging by any mode of transport provided proper protection against precipitation

and mechanical damage. The unit must be transported only in the working position.

• Avoid sharp blows, scratches, or rough handling during loading and unloading.

• Prior to the initial power-up after transportation at low temperatures allow the unit to warm up at room temperature for

at least 3-4 hours.

Humidity threshold

60 % 70 % 80 % 90 %

STORAGE AND TRANSPORTATION REGULATIONS

Andere Handbücher für Sileo DC 100

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG VENTO Eco Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Betriebsanleitung

BLAUBERG

BLAUBERG Centro EC Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50C3-1 S8 W V.2 Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-Jet Series Bedienungsanleitung

BLAUBERG

BLAUBERG BLABBRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Design V2 Bedienungsanleitung

BLAUBERG

BLAUBERG KOMFORT L350 Installationshandbuch

BLAUBERG

BLAUBERG BLABDUCTO Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 W Bedienungsanleitung

BLAUBERG

BLAUBERG Lux 100 Betriebsanleitung

BLAUBERG

BLAUBERG Box Series Bedienungsanleitung

BLAUBERG

BLAUBERG Extero Series Bedienungsanleitung

BLAUBERG

BLAUBERG Centro-mZ 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG Tower-SV series Bedienungsanleitung

BLAUBERG

BLAUBERG Kamin 125 Installationshandbuch

BLAUBERG

BLAUBERG Sileo V2 Bedienungsanleitung

BLAUBERG

BLAUBERG HRV H 120 Bedienungsanleitung

BLAUBERG

BLAUBERG BlauFast Bedienungsanleitung

BLAUBERG

BLAUBERG Axis series Bedienungsanleitung

BLAUBERG

BLAUBERG BRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG Centro-M EC 100 Bedienungsanleitung

BLAUBERG

BLAUBERG BLAUBOX ME Series Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-FP Series Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung