BLAUBERG Tower-SV series Bedienungsanleitung

OPERATION MANUAL

Tower-SV

Tower-SH

ROOF-MOUNTED SMOKE

REMOVAL FAN

www.blaubergventilatoren.de

Tower-SV / Tower-SH

CONTENT

Introduction

Use

Delivery set

Structural designation key

Dimensions and basic technical data

Safety requirements

Mounting and installation guidelines

Technical maintenance

Connection to power mains

Troubleshooting and fault handling

Storage requirements

Manufacturer’s warranty

Warranty limitation

Warranty card

www.blaubergventilatoren.de Tower-SV / Tower-SH

The present user manual contains the product description, technical data, operation, installation and

mounting guidelines for the roof-mounted smoke removing fan Tower-S.

The delivery set includes:

Fan - 1 item;

User manual - 1 item;

Packing box - 1 item.

INTRODUCTION

USE

DELIVERY SET

Tower-S fan is a component unit of emergency smoke removing exhaust ventilation systems designed for

forced removal of smoke, hot gases and heat that are emitted beyond the serviced premise in case of re

in manufacturing, public, administrative and other non-residential premises. The fan is designed for roof

mounting.

The fan is intended to protect the building structure and equipment against high temperature inuence,

remove combustion gases outside the serviced building and prevents re propagation to neighbouring

premises and areas.

The fan is allowed for general exhaust ventilation in case of low speed, but not less than 25%.

The fan is designed for operation in moderate and tropical climatic areas.

The fan is designed for removal of smoke and air mixtures with the temperature from +400 °C up to

+600 °C within 120 minutes.

The Tower-S fan design features:

- impeller with backward blades;

- motor placed o the transported air ow path;

- welded steel casing with powder coating;

- galvanized steel hood;

- double-side smoke removal.

The Tower-S fans are classied as the fans with horizontal air discharge and the fans with vertical air

discharge. The models with vertical air discharge are equipped with a backdraft damper.

Several fans are allowed to be installed on one roof close to each other.

www.blaubergventilatoren.de

Tower-SV / Tower-SH

Designation key example:

Tower-SH 630-600-1.5/930 - roof-mounted smoke removal fan with horizontal air discharge, impeller

diameter 630 mm, designed for transportation of air up to +600°C, motor power 1.5 kW and motor speed

930 min-1.

STRUCTURAL DESIGNATION KEY

DIMENSIONS AND BASIC TECHNICAL DATA

Fan type Dimensions [mm] Weight

[kg]

D D1 d d1 n H L L1 L2 L3

Tower-SV 630-600-1.5/930 541 507 18 9.5 12 1052 1040 880 1508 1178 200

Tower-SH 630-600-1.5/930 541 507 18 9.5 12 1052 1040 880 1238 1178 200

Tower-SV 630-600-5.5/1430 541 507 18 9.5 12 1052 1040 880 1508 1178 205

Tower-SH 630-600-5.5/1430 541 507 18 9.5 12 1052 1040 880 1238 1178 205

Tower-SV 710-600-3/960 674 639 18 11.5 16 1101 1040 880 1508 1178 210

Tower-SH 710-600-3/960 674 639 18 11.5 16 1101 1040 880 1238 1178 210

Tower-SV 710-600-7.5/1455 674 639 18 11.5 16 1101 1040 880 1508 1178 220

Tower-SH 710-600-7.5/1455 674 639 18 11.5 16 1101 1040 880 1238 1178 220

Table 1

Electric motor power [kW]

Max. transported air temperature [°C]

600

Impeller diameter [mm]

630, 710, 800, 900, 1000, 1100

Air discharge orientation

V - vertical; H - horizontal

Motor speed [RPM]

730, 950, 970, 1460

М - Terminal box included

Unit type

Roof-mounted smoke removal fan

Tower-S Х ХХХХ–ХХХ–ХХ/ХХХХ-X

1.5, 5.5, 3, 7.5, 11, 15, 30

www.blaubergventilatoren.de Tower-SV / Tower-SH

Tower-SV 800-600-5.5/950 674 639 18 11.5 16 1154 1040 880 1543 1178 220

Tower-SH 800-600-5.5/950 674 639 18 11.5 16 1154 1040 880 1238 1178 220

Tower-SV 800-600-15/1460 674 639 18 11.5 16 1154 1040 880 1543 1178 220

Tower-SH 800-600-15/1460 674 639 18 11.5 16 1154 1040 880 1238 1178 220

Tower-SV 900-600-11/970 751 716 18 11.5 16 1405 1200 1040 1870 1338 220

Tower-SH 900-600-11/970 751 716 18 11.5 16 1405 1200 1040 1398 1338 220

Tower-SV 900-600-30/1460 751 716 18 11.5 16 1405 1200 1040 1870 1338 448

Tower-SH 900-600-30/1460 751 716 18 11.5 16 1405 1200 1040 1398 1338 448

Tower-SV 1000-600-7.5/730 837 802 22 11.5 24 1588 1430 1240 2105 1568 475

Tower-SH 1000-600-7.5/730 837 802 22 11.5 24 1588 1430 1240 1628 1568 475

Tower-SV 1000-600-15/970 837 802 22 11.5 24 1588 1430 1240 2105 1568 550

Tower-SH 1000-600-15/970 837 802 22 11.5 24 1588 1430 1240 1628 1568 550

Tower-SV 1100-600-15/730 934 898 22 11.5 24 1736 1430 1240 2237 1568 540

Tower-SH 1100-600-15/730 934 898 22 11.5 24 1736 1430 1240 1628 1568 540

Tower-SV 1100-600-30/970 934 898 22 11.5 24 1736 1430 1240 2237 1568 760

Tower-SH 1100-600-30/970 934 898 22 11.5 24 1736 1430 1240 1628 1568 760

Tower-SV(H) 630-600-1.5/930

Tower-S(H) 630-600-5.5/1430

Tower-SV(H) 710-600-3/960

Tower-SV(H) 710-600-7.5/1455

Tower-SV(H) 800-600-5.5/950

Tower-SV(H) 800-600-15/1460

Tower-SV(H) 900-600-11/970

Tower-SV(H) 900-600-30/1460

Tower-SV(H) 1000-600-7.5/730

Tower-SV(H) 1000-600-15/970

Tower-SV(H) 1100-600-15/730

Tower-SV(H) 1100-600-30/970

Voltage, 50 Hz [V] 400 400 400 400 400 400 400 400 400 400 400 400

Power [kW] 1.5 5.5 3 7.5 5.5 15 11 30 7.5 15 15 30

Current [A] 3.7 11.3 7.4 15.1 12.3 29.5 23 57 18 31 31.3 59.6

Max. air ow

[m3/h] 8000 12500 14000 18000 19000 22000 25000 30000 28000 34000 40000 50000

Rotation per minute

[min-1]930 1450 960 1455 950 1460 970 1460 730 970 730 980

Max. transported air

temperature [°C] 600 600 600 600 600 600 600 600 600 600 600 600

Ingress Protection IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4 IPX4

Table 2

www.blaubergventilatoren.de

Tower-SV / Tower-SH

Fig. 1

4 holes

www.blaubergventilatoren.de Tower-SV / Tower-SH

Fig. 2

SAFETY REQUIREMENTS

Disconnect the fan from power mains prior to any connection, servicing and repair operations.

Mounting and maintenance are allowed for duly qualied electricians with valid electrical work permit for

electric operations at the units up to 1000 V after careful study of the present user’s manual.

The fan is a component unit and is designed for operation only connected to air ductwork.

Check the fan for any visible damages of the impeller and the casing before starting installation. The

casing internals must be free of any foreign objects which can damage the impeller blades.

Misuse of the fan or any unauthorized modication is not allowed.

The g. 1 shows the model with vertical air discharge Tower-SV and the g. 2 shows the model with

horizontal air discharge Tower-SH.

Warning! Do not operate the fan beyond the stated temperature range and in an aggres-

sive or explosive medium.

Warning!

Disconnect the fan from power mains prior to any connection, servicing and repair

operations.

www.blaubergventilatoren.de

Tower-SV / Tower-SH

Prior to mounting the fan:

read the present user manual carefully.

check the fan for any mechanical damages resulted in wrong transportation.

rotate the impeller by hand and make sure it has smooth running.

Follow the applicable safety rules during set-up and operation of the fan.

Fan mounting:

install the fan on the building roof, out of possible re areas;

check the roof frameworks for sucient rigidity in installation places;

the fan is designed for vertical installation only (vertical fan shaft) on a concrete or steel base plate of

min 250 mm height (with respect to possible level of precipitation);

remove the side shields and x the fan to the mounting frame with four anchor bolts at the frame

corners;

check that the fan components do not get deformed during mounting;

be sure to provide free and unhampered air exhaust from the fan.

The fan delivery set may include a mounting frame (optional). Install the mounting frame on a load-

carrying roof section true-vertical inside a prepared opening. The opening size must be sucient to

ensure free air duct passage and enough place for placement of connecting anges in compliance with

DIN 24154, Series 3.

Fix the mounting frame to the load-carrying roof surface in compliance with construction norms and

standards applicable for standard building designs.

Attach the backdraft damper or the rst air duct section directly to the fan prior to its installation.

The backdraft damper is delivered optionally. Provide additional xing of the air ducts to the building

structures to avoid load transfer from the air ducts to the fan.

To x the fan to the mounting frame install washers and nuts of respective diameter on the anchor bolts

that are welded to the mounting frame. To get access to the anchor bolts after the fan installation remove

the side panels, g. 3. Re-install the side panels back after tightening of the nuts.

MOUNTING AND INSTALLATION GUIDELINES

Warning! Do not put the fan on the air duct to avoid its deformation.

www.blaubergventilatoren.de Tower-SV / Tower-SH

Fig. 3

Fig.4

FAN DESIGN

Side panel

Tower-S fan

Mounting frame

Tower-SV

www.blaubergventilatoren.de

Tower-SV / Tower-SH

Fig. 5

1. Support frame

2. Electric motor

3. Protecting hood

4. Terminal box

5. Side panel

6. Intake spigot

7. Connecting ange

8. Exhaust backdraft damper (only for Tower-SV model)

9. Protecting screen (only for Tower-SH model)

10. Fixing screws for the protecting hood

The roof-mounted smoke removal fan consists of the welded support frame 1. The electric motor 2

covered with a protecting hood 3 is xed on the frame; The protecting hood incorporates a terminal box 4

(optionally, the model without terminal box is available); The impeller is located inside the support frame

and is covered with the side panels 5; The intake spigot with the connecting ange 7; The exhaust damper

8 for Tower-SV model and the protecting screen 9 for Tower-SH model.

The motor-impeller block is rigidly xed on a support frame that is made of rolled steel shapes.

The impeller is made of galvanizes steel. Its hub and a fastening screw are directly connected to the motor

shaft.

The standard fan motors are equipped with three-phase electric motors rated for 400 V / 50 Hz power

supply. Ingress protection rating is IP54 or IP 55, insulation class F (IEC).

Tower-SH

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere BLAUBERG Lüfter Handbücher

BLAUBERG

BLAUBERG BLABDUCTO Bedienungsanleitung

BLAUBERG

BLAUBERG BLABQUATRO Bedienungsanleitung

BLAUBERG

BLAUBERG Sileo Design 100 Bedienungsanleitung

BLAUBERG

BLAUBERG ISO-RB 100 Bedienungsanleitung

BLAUBERG

BLAUBERG Centro-mZ 100 L Bedienungsanleitung

BLAUBERG

BLAUBERG Axis series Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Eco Bedienungsanleitung

BLAUBERG

BLAUBERG BRAVO Bedienungsanleitung

BLAUBERG

BLAUBERG Axis-P Bedienungsanleitung

BLAUBERG

BLAUBERG VENTO Expert A50-1 W Bedienungsanleitung

BLAUBERG

BLAUBERG TRIO-100 Bedienungsanleitung

BLAUBERG

BLAUBERG Kamin 125 Installationshandbuch

BLAUBERG

BLAUBERG Axis-Jet Series Bedienungsanleitung

BLAUBERG

BLAUBERG TwinBox EC 150 Bedienungsanleitung

BLAUBERG

BLAUBERG VENTOErgo A50-1 Pro V.3 Bedienungsanleitung

BLAUBERG

BLAUBERG Helix-z S-Vent Bedienungsanleitung

BLAUBERG

BLAUBERG Centro EC Bedienungsanleitung

BLAUBERG

BLAUBERG KOMFORT L350 Installationshandbuch

BLAUBERG

BLAUBERG Auto Betriebsanleitung

BLAUBERG

BLAUBERG Trio Bedienungsanleitung

BLAUBERG

BLAUBERG Komfort Evap Cooler Bedienungsanleitung

BLAUBERG

BLAUBERG Box Series Bedienungsanleitung

BLAUBERG

BLAUBERG Auto Revers series Bedienungsanleitung

BLAUBERG

BLAUBERG HRV H 120 Bedienungsanleitung

Beliebte Lüfter Handbücher anderer Marken

ELTA FANS

ELTA FANS H03VV-F Bedienungsanleitung

Hunter

Hunter 20714 Gebrauchsanweisung

Emerson

Emerson CARRERA VERANDA CF542ORB00 Bedienungsanleitung

Hunter

Hunter Caraway Gebrauchsanweisung

Panasonic

Panasonic FV-15NLFS1 Bedienungsanleitung

Kompernass

Kompernass KH 1150 Bedienungsanleitung

VES

VES FALA100/12V/TR Bedienungsanleitung

Vertiv

Vertiv Liebert DCD Bedienungsanleitung

Westinghouse

Westinghouse GFP Series Bedienungsanleitung

Venmar

Venmar KUBIX HRV PLUS Series Bedienungsanleitung

Maico

Maico ECR 31 Bedienungsanleitung

Sonnenkonig

Sonnenkonig Dinky Bedienungsanleitung

S&P

S&P ECOWATT HXBR Bedienungsanleitung

Wider

Wider IMP03369BH Bedienungsanleitung

Panasonic

Panasonic F-60DHN Bedienungsanleitung

Broan

Broan 766BN Bedienungsanleitung

Premium

Premium PFS16022 Montageanleitung

Litex Industries

Litex Industries E-CGL52CB5C1 Bedienungsanleitung