Blomberg KFD 9952 PXD Bedienungsanleitung

Operating instructions

KFD 9952 PXD

Refrigerator

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in a 1st-class

manufacturing facility and checked under the most meticulous quality control

procedures, will provide you with years of good service.

For this, we recommend you to carefully read the entire manual of your product

before using it and keep it at hand for future reference.

This manual

• Will help you use your appliance quickly and safely.

• Read the manual before installing and operating your product.

• Follow the instructions, especially those for safety.

• Keep the manual in an easily accessible place as you may need it later.

• Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

CImportant information or useful usage tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

This product is supplied with the selective sorting symbol for waste electrical

and electronic equipment (WEEE).

This means that this product must be handled pursuant to European Directive

2002/96/EC in order to be recycled or dismantled to minimise its impact on

the environment. For further information, please contact your local or regional

authorities.

Electronic products not included in the selective sorting process are potentially

dangerous for the environment and human health due to the presence of

hazardous substances.

Recycling

1 The refrigerator 3

2 Warnings 4

ELECTRICAL REQUIREMENTS ......... 5

WARNING! THIS APPLIANCE MUST

BE EARTHED .................................... 5

ENERGY SAVING TIPS...................... 6

3 Installation 7

Points to be considered when re-

transporting your refrigerator .............7

Before operating your refrigerator ...... 7

Electric connection ............................ 8

Disposing of the packaging ...............8

Disposing of your old refrigerator ....... 8

Placing and Installation ...................... 9

Floor balance adjustment ..................9

Adjusting the gap between the upper

door ................................................ 10

Connection of the Water Pipe to the

Cold Water Mains Line .................... 11

Prior to first use of Water Dispenser. 13

Using the water spring..................... 14

Spillage Tray .................................... 14

4 Preparation 15

5 Using your refrigerator 16

Indicator Panel................................. 16

Door Open Alarm: .......................... 18

Things to do to have the filter usage

time calculated automatically ...........19

Egg tray........................................... 20

Sliding Body Shelves ....................... 20

Chiller compartment ........................ 20

Crisper ............................................ 21

Movable Middle Section ................. 22

Blue light ......................................... 22

Telescopic Drawer .......................... 23

Dual cooling system: .......................23

Ice maker ........................................ 24

Ice box ............................................ 24

Freezing fresh food .......................... 25

Recommendations for preservation of

frozen food ...................................... 25

Placing the food .............................. 26

Deep-freeze information .................. 26

6 Maintenance and

cleaning 27

Protection of plastic surfaces .......... 27

7 Recommended solutions

for the problems 28

8 How To Obtain Service 31

9Guarantee Details 32

1The refrigerator

A- Fridge compartment

B- Freezer compartment

1- Butter & Cheese shelf

2- Fridge compartment door

shelves

3- Fridge compartment glass

shelves

4- Diffuser cover

5- Illumination lens

6- Movable middle section

7- Chiller compartment

8- Bottle shelf

9- Crisper

10- icebox

11- Movable separators

12- Ice maker

CFigures that take place in this instruction manual are schematic and may

not correspond exactly with your product. If the subject parts are not included in

the product you have purchased, then it is valid for other models.

2Warnings

•DO NOT connect your appliance to

the electricity supply until all packing

and transit protectors have been

removed.

• Leave to stand for at least 4

hours before switching on to allow

compressor oil to settle if transported

horizontally.

• If you are discarding an old

refrigerator with a lock or latch fitted

to the door, disable the lock/latch,

ensure that it is left in a safe condition

to prevent the entrapment of young

children.

• This fridge/freezer must only be used

for its intended purpose i.e the storing

and freezing of edible foodstuff.

• Do not dispose of the appliance on

a fire. At BLOMBERG, the care and

protection of our environment is an

ongoing commitment. This appliance

which is among the latest range

introduced is particularly environment

friendly. Your appliance contains non

CFC / HFC natural substances in the

cooling system (Called R600a) and in

the insulation (Called cyclopentane)

which are potentially flammable

if exposed to fire. Therefore, take

care not to damage, the cooling

circuit / pipes of the appliance in

transportation and in use. In case of

damage do not expose the appliance

to fire or potential ignition source and

immediately ventilate the room where

the appliance is situated.

• We suggest you contact your local

authority for disposal information and

facilities available.

• See Installation Instructions on on

page 8 for information on suitable

location.

• To obtain the best possible

performance and trouble free operation

from your appliance it is very important

to carefully read these instructions.

• On delivery, check to make sure that

the product is not damaged and that

all the parts and accessories are in

perfect condition.

• Ensure that the plug remains readily

accessible. Do not use multiple

adapter or extension cable.

• Failure to observe these instructions

may invalidate your right to free service

during the guarantee period.

• Keep ventilation openings, in the

appliance enclosure or in the built-in

structure, clear of obstruction.

• Do not use mechanical devices

or other means to accelerate the

defrosting process, other than those

recommended by the manufacturer.

• Do not damage the refrigerant circuit.

• Do not use electrical appliances

inside the food storage compartments

of the appliance, unless they are

of the type recommended by the

manufacturer.

• We suggest you keep these

instructions in a safe place for easy

reference.

• This appliance is not intended for use

by persons (including children) with

reduced physical, sensory or mental

capabilities, or lack of experience

and knowledge, unless they have

been given supervision or instruction

concerning use of the appliance by a

person responsible for their safety.

• Children should be supervised to

ensure that they do not play

with the appliance.

ELECTRICAL

REQUIREMENTS

Before you insert the plug into the wall

socket make sure that the voltage and

the frequency shown on the rating

plate inside the appliance corresponds

to your electricity supply.

Rating label is on the left hand side of

fridge inner liner.

We recommend that this appliance be

connected to the mains supply via a

suitable switched and fused socket.

The appliance must be positioned so

that the plug is accessible.

Should the mains lead of the appliance

become damaged or should it need

replacing at any time, it must be

replaced by a special purpose made

mains lead which can only be obtained

from a BLOMBERG Authorised Service

Agent.

WARNING! THIS APPLIANCE

MUST BE EARTHED

If the fitted moulded plug is not

suitable for your socket, then the plug

should be cut off and an appropriate

plug fitted. Destroy the old plug which

is cut off as a plug with bared cord

could cause a shock hazard if inserted

into a socket elsewhere in the house.

The moulded plug on this appliance

incorporates a 13 A fuse. Should

the fuse need to be replaced an

ASTABEAB approved BS 1362 fuse

of the same rating must be used. Do

not forget to refit the fuse cover. In the

event of losing the fuse cover the plug

must not be used until a replacement

fuse cover has been fitted. Colour

of the replacement fuse cover must

be the same colour as that visible on

the pin face of the plug. Fuse covers

are available from any good electrical

store.

IMPORTANT! FITTING A

DIFFERENT PLUG

As the colours of the wires in the

mains lead of this appliance may

not correspond with the coloured

markings identifying the terminals in

your plug proceed as follows: (See

diagram).

1. Connect the green-yellow or green

(Earth) wire to the terminal in the plug

marked ‘E’ or with the symbol or

coloured green and yellow or green.

2. Connect the blue (Neutral) wire to

the terminal in the plug marked ‘N’ or

coloured black.

3. Connect the brown (Live) wire to

the terminal in the plug marked ‘L’ or

coloured red.

With alternative plugs a 13 A fuse

must be fitted either in the plug or

adaptor or in the main fuse box. If in

doubt contact a qualified electrician.

FITTED WITH

BS 1362 13A FUSE ALWAYS

FIT BS 1362 REPLACEMENT

CARTRIDGE FUSE

GREEN &

YELLOW

GREEN

BLUE

BLACK

BROWN

RED

22mm.

6mm.

6mm. 32mm.

12mm.

FUSE

CORD GRIP

ENERGY SAVING TIPS

1- Ensure your appliance is installed in

a well ventilated area.

2- Ensure the time between buying

chilled/frozen food and placing them in

your appliance is kept to a minimum,

particularly in summer. We recommend

you use a cool bag or a special carrier

bag to carry perishable food.

3- Do not leave the door (s) of your

appliance open longer than necessary

and ensure they are closed properly

after each opening.

4- Defrost frozen food in the fridge

compartment, so that frozen food acts

as an ice pack to assist cooling in the

fridge.

3Installation

CPlease remember that the

manufacturer shall not be held liable if

the information given in the instruction

manual is not observed.

Points to be considered

when re-transporting your

refrigerator

1. Leave for 4 hours if transported

horizontally.

2. Your refrigerator must be

emptied and cleaned prior to any

transportation.

3. Shelves, accessories, crisper and etc.

in your refrigerator must be fastened

securely by adhesive tape against any

jolt before repackaging.

4. Packaging must be adequate and the

rules of transportation printed on the

package must be followed.

CAlways remember...

Every recycled material is an

indispensable source for nature and for

our national resources.

If you wish to contribute to recycling

the packaging materials, you can

get further information from the

environmental bodies or local

authorities.

Before operating your

refrigerator

Before starting to use your refrigerator

check the following:

1. Is the interior of the refrigerator dry

and can the air circulate freely in the

rear of it?

2. You can install the 2 plastic wedges

as illustrated in the figure. Plastic

wedges will provide the required

distance between your refrigerator

and the wall in order to allow the air

circulation. (The illustrated figure is

only an example and does not match

exactly with your product.)

3. Clean the interior of the refrigerator as

recommended in the “Maintenance

and cleaning” section.

4. Plug the refrigerator into the wall

outlet. When the door is open the

respective interior light will come on.

5. You will hear a noise as the

compressor starts up. The liquid and

gases sealed within the refrigeration

system may also give rise to noise,

even if the compressor is not running

and this is quite normal.

6. Front edges of the refrigerator may

feel warm. This is normal. These

areas are designed to be warm to

avoid condensation.

Electric connection

Connect your refrigerator to a

grounded socket which is being

protected by a fuse with the

appropriate capacity.

Important:

BThe connection must be in

compliance with national regulations.

BThe power cable plug must be easily

accessible after installation.

BThe specified voltage must be equal

to your mains voltage.

BExtension cables and multiway plugs

must not be used for connection.

B A damaged power cable must be

replaced by a qualified electrician.

BThe appliance must not be operated

before it is repaired! There is danger

of electric shock!

BWarning against electric voltage.

Disposing of the packaging

AThe packing materials may be

dangerous for children. Keep the

packing materials out of the reach

of children or dispose them of by

classifying them in accordance

with the waste instructions. Do not

dispose them of along with the normal

household waste.

The packing of your refrigerator is

produced from recyclable materials.

Disposing of your old

refrigerator

Dispose of your old machine without

giving any harm to the environment.

A You may consult your authorized

dealer or waste collection center of

your municipality about the disposal

of your refrigerator.

A Before disposing of your refrigerator,

cut out the electric plug and, if there

are any locks on the door, make them

inoperable in order to protect children

against any danger.

Placing and Installation

ACaution: Never plug the refrigerator

into the wall outlet during installation.

Otherwise, risk of death or serious

injury may arise.

AIf the entrance door of the room

where the refrigerator will be installed

is not wide enough for the refrigerator

to pass through, you can carefully

remove the doors of your refrigerator

and pass it sideways through the door.

1. Install your refrigerator to a place

that allows ease of use.

2. Keep your refrigerator away from

heat sources, humid places and direct

sunlight.

3. There must be appropriate air

ventilation around your refrigerator in

order to achieve an efficient operation.

If the refrigerator is to be placed in a

recess in the wall, there must be at

least 5 cm distance with the ceiling

and at least 5 cm with the wall.

If the floor is covered with a carpet,

your product must be elevated 2.5 cm

from the floor.

4. Place your refrigerator on an even

floor surface to prevent vibration.

5. Do not keep your refrigerator in

ambient temperatures under 10°C.

Floor balance adjustment

AIf your refrigerator is unbalanced;

1- Ventilation cover is removed by

unscrewing its screws as illustrated

in the figure before the procedure.

You can balance your refrigerator by

turning the front legs of it as illustrated

in the figure. The corner where the

leg exists is lowered when you turn

in the direction of black arrow and

raised when you turn in the opposite

direction. Taking help from someone to

slightly lift the refrigerator will facilitate

this process.

2. After the balance issue is remedied,

install back the ventilation cover and

fasten the screws.

A B C

3. Remove the screws fastening the

lower ventilation cover using a Philips

screwdriver.

Inhaltsverzeichnis

Andere Blomberg Kühlschrank Handbücher

Blomberg

Blomberg KSM 9640 A Series Bedienungsanleitung

Blomberg

Blomberg KGM 9690 Bedienungsanleitung

Blomberg

Blomberg KNM4760XN Bedienungsanleitung

Blomberg

Blomberg KFD 9952 XA+ Bedienungsanleitung

Blomberg

Blomberg BRFB1050FFBIN Bedienungsanleitung

Blomberg

Blomberg KSE 1550 i Bedienungsanleitung

Blomberg

Blomberg TSM 1541 A+ Bedienungsanleitung

Blomberg

Blomberg TSM1750u Bedienungsanleitung

Blomberg

Blomberg KQD 1250 Bedienungsanleitung

Blomberg

Blomberg SOE 96733 Bedienungsanleitung

Blomberg

Blomberg BRFD2650SS Bedienungsanleitung

Blomberg

Blomberg KQD 1253 XN-KQD1254XN Bedienungsanleitung

Blomberg

Blomberg KGM4574VPS Bedienungsanleitung

Blomberg

Blomberg DNE 9650T Bedienungsanleitung

Blomberg

Blomberg KQD 1327 PX Bedienungsanleitung

Blomberg

Blomberg KFI 1290 Bedienungsanleitung

Blomberg

Blomberg DND 9977 P Bedienungsanleitung

Blomberg

Blomberg KQD 1620 GB Bedienungsanleitung

Blomberg

Blomberg KNM1561i Bedienungsanleitung

Blomberg

Blomberg SND 9680 XA+ Bedienungsanleitung

Blomberg

Blomberg KNM4554V Bedienungsanleitung

Blomberg

Blomberg KQD 1360X Bedienungsanleitung

Blomberg

Blomberg SSM 1450 I A++ Bedienungsanleitung

Blomberg

Blomberg BRFB1052FFBI2 Bedienungsanleitung

Beliebte Kühlschrank Handbücher anderer Marken

Bonnet Neve

Bonnet Neve SKYVIEW PLUS Bedienungsanleitung

Zanussi Electrolux

Zanussi Electrolux ZERB 8441 Bedienungsanleitung

Sharp

Sharp SJ-BA31IEXW2-EU Bedienungsanleitung

CORBERO

CORBERO CC2300MCW Bedienungsanleitung

KitchenAid

KitchenAid 2205264 Bedienungsanleitung

Stengel

Stengel KU 1101 A++ Bedienungsanleitung

NEFF

NEFF KI181 Series Bedienungsanleitung

Hoshizaki

Hoshizaki Reach-In Bedienungsanleitung

Amana

Amana ASD2524VES00 Bedienungsanleitung

BOMANN

BOMANN KGC 213 Bedienungsanleitung

Danby

Danby DAR044A1SLDD Montageanleitung

Samsung

Samsung RF323TE Bedienungsanleitung

Beko

Beko CSA31022 Bedienungsanleitung

IKEA

IKEA FROSTIG C 185 E Bedienungsanleitung

Electrolux

Electrolux ER 6821 D Bedienungsanleitung

True

True TS-28 Bedienungsanleitung

Frigidaire

Frigidaire FSC23R5DW9 Bedienungsanleitung

Beko

Beko LSP4579W Bedienungsanleitung