Blue-White F-430 Bedienungsanleitung

Your Blue-White F-430 Series

In-Line Flowmeter

This flowmeter was designed to be easily

installed. Please read this Instruction guideline

before installing your flowmeter.v

Building Reliable

Products that

Enhance the

Quality of Life

Blue-White

Industries, Ltd.

F-430 Flowmeter

Instruction Manual

Installation Guideline

Catalog No. Description QtyItem

76001-226 1.5” male NPT adapter (PVC) 2

76001-216 2” male NPT adapter (PVC) 2

90003-118 O-ring (Viton)** 2

90003-140 O-ring (Aflas)** 2

- Float (SS)* 1

391001-198 Wire Holder (PSF) 2

676001-229 Guidewire (SS)* 1

7- Meterbody (Acrylic) 1

F-430 Acrylic Meter Tube

Page 2 Page 3

F-430 F-430

1 The flowmeter must be installed in a

vertical plane to ensure accuracy.

Misalignment may damage the flowmeter

and also may cause the o-ring seals to leak.

2 Use only PTFE tape on the threaded

adapters. Pipe dope and glue will damage

the polysulfone meter body and fittings. Or

install the flowmeter after all glued fittings

have dried and fumes have been purged

from the system.

3 Mounts and supports must be sturdy

enough to support the plumbing and

prevent vibration. Vibration and heavy

loads will damage the meter.

4 Avoid imposing a sudden burst of flow

to the meter. Solenoid valves will damage

the meter. Such a burst will cause the float to

impact the top float stop with destructive

force.

5 The Maximum fluid temperature is

dependant on the working pressure. High

pressure and temperature with damage the

meter. (see temperature VS pressure chart)

TEMPERATURE vs PRESSURE

Temperature

PSIg / BAR

130°F / 54.4°C

120°F / 48.9°C

110°F / 43.3°C

100°F / 37.8°C

90°F / 32.2°C

80°F / 26.7°C

70°F / 21.1°C

0 / 0 50 / 3.5 100 / 6.9 130 / 9

*Hastelloy C-276 Option Available

**EP Option Available

PSF= polysulfone

SS = # 316 Stainless Steel

PVC = Polyvinyl chloride

Scale

Permanent dual scale silkscreen

Max Pressure

See Temperature vs. Pressure chart*

Max Temperature

See Temperature vs. Pressure chart*

Height

14” (355.6 mm)

Width

3” (76.2 mm)

Accuracy

± 5% of full scale reading

METER SPECS

PARTS LIST

EXPLODED VIEW, PARTS LIST AND SPECS

EXPLODED VIEW

Shading indicates item not sold separately

APPLICATION NOTES

Although meters may be suitable for other chemicals, Blue-White cannot

guarantee their suitability. It is the responsibility of the user to determine the

suitability of the flowmeter in their application. Flowmeters are tested and

calibrated for water only.

MAINTENANCE

The “Exploded View” drawing illustrates assembly of the F-451N series

meter. If your flowmeter needs to be cleaned refer to this drawing when

reassembling the unit. The tapered tube may be cleaned with a soft bottle

brush. Use a MILD soap and water solution for cleaning purposes. Note the

float’s “up” position.

Installation Guideline

Catalog No. Description QtyItem

76001-226 1.5” male NPT adapter (PVC) 2

76001-216 2” male NPT adapter (PVC) 2

90003-118 O-ring (Viton)** 2

90003-140 O-ring (Aflas)** 2

- Float (SS)* 1

391001-198 Wire Holder (PSF) 2

676001-229 Guidewire (SS)* 1

7- Meterbody (Acrylic) 1

F-430 Acrylic Meter Tube

Page 2 Page 3

F-430 F-430

1 The flowmeter must be installed in a

vertical plane to ensure accuracy.

Misalignment may damage the flowmeter

and also may cause the o-ring seals to leak.

2 Use only PTFE tape on the threaded

adapters. Pipe dope and glue will damage

the polysulfone meter body and fittings. Or

install the flowmeter after all glued fittings

have dried and fumes have been purged

from the system.

3 Mounts and supports must be sturdy

enough to support the plumbing and

prevent vibration. Vibration and heavy

loads will damage the meter.

4 Avoid imposing a sudden burst of flow

to the meter. Solenoid valves will damage

the meter. Such a burst will cause the float to

impact the top float stop with destructive

force.

5 The Maximum fluid temperature is

dependant on the working pressure. High

pressure and temperature with damage the

meter. (see temperature VS pressure chart)

TEMPERATURE vs PRESSURE

Temperature

PSIg / BAR

130°F / 54.4°C

120°F / 48.9°C

110°F / 43.3°C

100°F / 37.8°C

90°F / 32.2°C

80°F / 26.7°C

70°F / 21.1°C

0 / 0 50 / 3.5 100 / 6.9 130 / 9

*Hastelloy C-276 Option Available

**EP Option Available

PSF= polysulfone

SS = # 316 Stainless Steel

PVC = Polyvinyl chloride

Scale

Permanent dual scale silkscreen

Max Pressure

See Temperature vs. Pressure chart*

Max Temperature

See Temperature vs. Pressure chart*

Height

14” (355.6 mm)

Width

3” (76.2 mm)

Accuracy

± 5% of full scale reading

METER SPECS

PARTS LIST

EXPLODED VIEW, PARTS LIST AND SPECS

EXPLODED VIEW

Shading indicates item not sold separately

APPLICATION NOTES

Although meters may be suitable for other chemicals, Blue-White cannot

guarantee their suitability. It is the responsibility of the user to determine the

suitability of the flowmeter in their application. Flowmeters are tested and

calibrated for water only.

MAINTENANCE

The “Exploded View” drawing illustrates assembly of the F-451N series

meter. If your flowmeter needs to be cleaned refer to this drawing when

reassembling the unit. The tapered tube may be cleaned with a soft bottle

brush. Use a MILD soap and water solution for cleaning purposes. Note the

float’s “up” position.

URL: www.Blue-White.com

E-mail: [email protected]

T[email protected]

Phone: 714-893-8529

Fax: 714-894-0149

Industries, Ltd.

Blue-White

Industries, Ltd.

REV.02 09142020

80000-380

BLUE-WHITE INDUSTRIES

LIMITED WARRANTY

FLOWMETERS are warranted to be free of defects in material and workmanship

for up to 12 months from the date of factory shipment. Warranty coverage is limited to

repair or replacement of the defective flowmeter only. Blue-White Industries does not

assume responsibility for any other damage that may occur.

This warranty does not cover damage to the flowmeter that results from misuse or

alterations, nor damage that occurs as a result of: meter misalignment, improper

installation, over tightening, use of non- recommended chemicals, use of non-

reccomended adhesives or pipe dopes, excessive heat or pressure, or allowing the

meter to support the weight of related piping. Flowmeters are tested and calibrated

with water only. Although meters may be suitable for other chemicals, Blue-White

cannot guarantee their suitability.

Flowmeters are repaired at the factory only. Call or write the factory to receive a

Return Authorization Number, carefully pack the flowmeter to be returned, including a

brief description of the problem. Note the RA number on the outside of the carton.

Prepay all shipping costs. The factory does not accept COD Shipments. Damage that

occurs during shipping is the responsibility of the sender.

ISO 9001:2015

CERTIFIED

MADE IN THE

We are not satisfied

until you are!

USA

MADE IN THE

Inhaltsverzeichnis

Andere Blue-White Messgerät Handbücher

Blue-White

Blue-White ProSeries SONIC-PRO S4 Series Bedienungsanleitung

Blue-White

Blue-White F-460 Bedienungsanleitung

Blue-White

Blue-White MICRO-FLO Bedienungsanleitung

Blue-White

Blue-White F-300 Bedienungsanleitung

Blue-White

Blue-White APFCL Bedienungsanleitung

Blue-White

Blue-White F-2000 Bedienungsanleitung

Blue-White

Blue-White D-300 Bedienungsanleitung

Blue-White

Blue-White FLEXFLO M4 Series Bedienungsanleitung

Blue-White

Blue-White F-461 Bedienungsanleitung

Blue-White

Blue-White F-400 Bedienungsanleitung

Blue-White

Blue-White F-440 Bedienungsanleitung

Blue-White

Blue-White F-451 Series Bedienungsanleitung

Blue-White

Blue-White ProSeries-M MS-6 Series Bedienungsanleitung

Blue-White

Blue-White FLEXFLO A1 Series Bedienungsanleitung

Blue-White

Blue-White ProSeries-M MS-6 Series Bedienungsanleitung

Blue-White

Blue-White ProSeries CHEM-PRO C2F Series Bedienungsanleitung

Blue-White

Blue-White ProSeries Sonic-Pro S1 Bedienungsanleitung

Blue-White

Blue-White F-1000 Bedienungsanleitung

Blue-White

Blue-White F-460 Series Bedienungsanleitung

Blue-White

Blue-White SONIC-PRO MS6 Bedienungsanleitung

Blue-White

Blue-White F-2000 Bedienungsanleitung

Blue-White

Blue-White FLEXFLO A2 Series Bedienungsanleitung

Blue-White

Blue-White F-1000 Bedienungsanleitung

Blue-White

Blue-White APNTU Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung