Body Craft ECT800g Bedienungsanleitung
ECT800g
Elliptical Cross Trainer
CONGRATULATIONS! And THANK YOU for selecting the
BODYCRAFT ECT800g Elliptical Cross Trainer! Your choice reflects a
wise investment in you and your family’s health and wellness. We
hope you use it for many healthy years!
For your safety and benefit, please read this entire manual. Please keep the manual in a
convenient place for quick reference when needed.
Bodycraft offers a complete array of high quality fitness equipment. Please refer to our web
site at www.bodycraft.com to view more ways to enhance your lifestyle.
Your Bodycraft ECT800g has all the quality and design elements to make your workout
extremely efficient and comfortable. Your new Elliptical Cross Trainer is a serious cardio
fitness machine that will keep you motivated, challenged and within reach of your fitness
goals. The Bodycraft ECT800g will provide an efficient, low impact cardiovascular workout
that will help improve energy levels and your quality of life. Cardiovascular training is vital for
all ages and the Bodycraft ECT800g will provide an effective workout, producing results that
will encourage you to reach your fitness goals and maintain the body you have always
wanted. Spending 15 to 30 minutes a day, three times a week is all youneed to start seeing
the benefits of a regular exercise program.
As a premium exercise equipment manufacturer we are committed to your complete
satisfaction. If you have questions, suggestions or find missing or damaged parts, we
guarantee your complete satisfaction through our authorized dealer network or by contacting
us directly. Please call your local dealer or Bodycraft.
Recreation Supply, Inc.
7699 Green Meadows Dr.
Lewis Center, OH 43035
Purchaser’s Reference Information:
IT IS IMPERATIVE THAT YOU FILL IN
THE FOLLOWING INFORMATION AND
REFER TO IT SHOULD THE NEED FOR
SERVICE ARISE.
Product Name: ECT800g Elliptical Cross Trainer
Serial Number: EC _ _ _ _ _ _ _ _ _ _ _ _
Proof of purchase must be supplied to validate warranty and the product must have
been registered with Bodycraft via online at www.bodycraft.com or by calling
800-990-5556 or 740-965-2442 M-F 9 a.m. - 5 p.m. EST.
Serial #
Product Safety ………………………….…………………………….. 1
Parts Contents………………………….…………………………….. 2
Placement …………………………………………………………… 3
Assembly ……………………………………………….…………….. 4
Maintenance & Adjustment ……………………………..………… 8
Stretching……………………………………………………………... 9
Computer Operation…………………………………………………... 10
Troubleshooting ……………………………………………..………… 16
Exploded View (Assemblies)…………………………..…………….. 17
Assemblies Parts List………………………………………..………… 18
Exploded View ……………………………………….………………19
Detailed Parts List…………………………………………..………… 20
Warranty ……………………………………………………………... 23
TABLE OF CONTENTS
Product Safety
1
Basic precautions should always be followed, including the following safety
instructions when using this equipment:
Read all instructions before using this equipment.
1. It is recommended that you perform stretching exercises before using this equipment.
2. Please make sure all components are not damaged and in working order before use.
3. This equipment should be placed on a flat level surface while in use. Using a mat or
other material on the ground is recommended.
4. Please wear proper clothes and shoes when using this equipment; do not wear clothes
that might catch in any part of the equipment.
5. Do not attempt any maintenance or adjustments other than those described in this
manual. Should any problems arise, discontinue use and consult an Authorized Ser-
vice Representative.
6. Use caution when stepping on or stepping off the pedals. Align the pedals so the
backs are even with each other. Always hold the stationary handlebars first and either
from the rear or side of the unit, step onto the lower pedal first Then step onto the op-
posite pedal. During the workout always hold onto the stationary or upper body han-
dlebars. To ensure the pedals run smoothly push or pull on the upper body handlebars
first, then follow with leg motion. When stepping off the machine, while holding onto
the stationary handles, make sure to step off the highest positioned pedal first, and
then the lowest.
7. Do not use the equipment outdoors.
8. This equipment is for household or light commercial use only.
9. Only one person should be on the equipment while in use.
10. Keep children and pets away from the product while in use. This machine is designed
for adults only.
11. If you feel chest pains, nausea, dizziness, or shortness of breath, you should stop ex-
ercising immediately and consult your physician before continuing.
12. The maximum weight capacity for this product is 350 lbs /160 kgs.
WARNING: Before beginning any exercise program consult your physician.
This is especially important for the persons who are over 35 years
of age or who have pre-existing health problems. Read all
instructions before using any fitness equipment.
CAUTION: Read all instructions carefully before operating this product.
Retain this Owner’s Manual for future reference.
Parts Contents
2
Main Frame
Mast Cover
Cover
Mast
Computer
Console
Right
Pedal
Left Arm Cover
Right Arm Cover
Axis Cover
Left Arm
Right Arm
Hardware Pack
Placement
3
Moving
Tilt the ECT800g up from the back to engage the wheels on the front of the machine.
Important!: The ECT800g is heavy. 2 people are required to move this machine.
Placement
The ECT800g should be placed on a solid level surface.
Minimum Clearance
For access to, passage around and emergency dismount allow for 20” on at least one
side and 20” behind the ECT800g pedals.
User
The ECT800g should not be used by persons weighing more than 350 lbs /160 kgs.
Wear appropriate exercise clothing without loose articles that could be caught in the
ECT800g’s moving parts during a workout.
Personal Safety
Stop exercising if you feel faint, dizzy or experience pain. Do not insert any object or
body parts into any openings.
26”
81”
64”
206cm 66cm
163cm
Assembly
4
Pedal Installation
1. Install the Right Pedal to the Main Frame using one M10 Bolt 5 and one M10
Nut 7 as shown. Tighten.
Mast Installation
1. Install the Mast using the four pre-installed Bolts as shown. Tighten.
2. Connect the Wire Harness Connecters located at the bottom of the Mast and at the
top of the Main Frame.
Right Pedal
M10
Bolt 5
M10
Nut 7
Mast
Wire Harness
Connectors
Main Frame
Preinstalled
Bolts x4
Assembly
5
Console Installation
1. Remove the four pre-installed Screws from the rear of the Computer Console.
2. Connect the Wire Harness Connectors leading out from the top of the Mast to the
Wire Harness Connectors from the back of the Computer Console.
3. Install the Computer Console to the Mast using the four previously removed screws.
Be careful not to pinch the wires.
4. Battery must be connected before using this console. Connect the battery located in
the rear of the Computer Console by opening the battery cover and connect the plug
as shown. Fail to do so will result console to malfunction.
Main Frame
Computer
Console
Located at the back of
the Computer Console
6
Assembly
Handlebar Installation
1. Install the Left and Right Handlebars one at a time by loosely installing two each
M8*45 Bolt 6 with two each Washers 4 and two each M10*90 Bolt 7 with two each
M10 Nuts 3 as shown.
2. Tighten all bolts. IMPORTANT: Tighten the shorter M8*45 Bolts 6 first on each
side and then tighten the M10*90 Bolts 7 and Nuts second to complete the
handle bar assembly.
3. Install the Left and Right Arm Covers as shown.
M8*45
Bolt 6
M8
Washers 4
M10*90
Bolt 7
M10
Nut 3
M10*90
Bolt 7
M8*45
Bolt 6
M8
Washers 4
M10
Nut 3
Left
Handlebar
Right
Handlebar
Left
Arm Cover
Right
Arm Cover
Assembly
7
Covers Installation
1. Install the Axis Cover onto the Mainframe using two M5*12 Screws 1 and two
M5*12 Screws 2 as shown. Tighten.
2. Install Cover onto the Mainframe using two M5*12 Screws 1 as shown. Tighten.
3. Attach the Mast Cover onto Top Cover around the Mast. (Note: There is a split
that allows it to wrap around the mast and set onto the Top Cover)
ASSEMBLY IS COMPLETE!
IMPORTANT! Please Level the machine prior to use!
Instructions for leveling are on the next page.
Cover
Mast
Cover
Axis
Cover
M5*12
Screw 1
M5*12
Screw 1
M5*12
Screw 2
Inhaltsverzeichnis
Andere Body Craft Ellipsentrainer Handbücher
Body Craft
Body Craft SW-HFT Bedienungsanleitung
Body Craft
Body Craft ECT-2500 Bedienungsanleitung
Body Craft
Body Craft ECT400g Bedienungsanleitung
Body Craft
Body Craft ECT500g Bedienungsanleitung
Body Craft
Body Craft ECT-2100 Bedienungsanleitung
Body Craft
Body Craft SCT400g Bedienungsanleitung
Body Craft
Body Craft EXP Series Bedienungsanleitung
Beliebte Ellipsentrainer Handbücher anderer Marken
Weslo
Weslo Momentum 4.0 Elliptical Bedienungs- und Wartungshandbuch
Progear Fitness
Progear Fitness Air elliptical pro 1307 Bedienungsanleitung
Torque Fitness
Torque Fitness XPLLP Bedienungsanleitung
Octane Fitness
Octane Fitness PRO3700C Bedienungsanleitung
Xterra
Xterra FS5.8e Bedienungsanleitung
Bodyguard
Bodyguard E-40 Bedienungsanleitung
Bonn Germany
Bonn Germany Concept 2.2 Bedienungsanleitung
Precor
Precor Resolute RSL 620 Bedienungsanleitung
NordicTrack
NordicTrack E 9.2 Elliptical Bedienungsanleitung
Vision Fitness
Vision Fitness X6600iNetTV Bedienungsanleitung
Matrix
Matrix MX-A5x Bedienungsanleitung
SportsArt Fitness
SportsArt Fitness ECO-NATURAL Elite E874 Bedienungsanleitung
