Bosch GLL 2-10 Professional Montageanleitung

IMPORTANT: IMPORTANT : IMPORTANTE:

Read Before Using Lire avant usage Leer antes de usar

Operating/Safety Instructions

Consignes de fonctionnement/sécurité

Instrucciones de funcionamiento y seguridad

GLL2-10

For English Version Version française Versión en español

See page 5 Voir page 11 Ver la página 16

1-877-BOSCH99 (1-877-267-2499) www.boschtools.com

Call Toll Free for

Consumer Information

& Service Locations

Pour obtenir des informations

et les adresses de nos centres

de service après-vente,

appelez ce numéro gratuit

Llame gratis para

obtener información

para el consumidor y

ubicaciones de servicio

OffOffOff On

Off

Off On

Off

-2-

-3-

OffOn

Off On

Off

OffOn

4˚

> 4˚

OffOffOffOn

OffOn

> 4˚

± 4˚

Off

OffOnOnOn

Off On

-4-

Make sure that this device and the tool are securely mounted before operation.

WARNING

Assurez-vous que cet appareil et l’outil sont solidement assujettis avant de les utiliser.

Asegúrese de que este dispositivo y la herramienta estén montados de manera segura

antes de su utilización.

AVERTISSEMENT

ADVERTENCIA

Read all instructions. Failure to follow all instructions listed below may

result in hazardous radiation exposure, electric shock, fire and/or

serious injury. The term “tool” in all of the warningslisted below refersto your mains-operated

(corded) tool or battery-operated (cordless) tool.

The following labels are on your laser tool for your convenience and

safety. They indicate where the laser light is emitted by the tool.

ALWAYS BE AWARE of their location when using the tool.

Do not direct the laser beam at personsor animalsand do not stare into the

laser beam yourself. Thistool produceslaser class 2 laser radiation and

complieswith 21 CFR 1040.10 and 1040.11 except for deviationspursuant to

Laser Notice No. 50, dated June 24, 2007. Thiscan lead to persons

being blinded.

Changesor modificationsto thisequipment not expressly approved by the party responsible

for compliance could void the user'sauthority to operate the equipment.

CAUTION Use of controlsor adjustmentsor performance of proceduresother than those

specified herein may result in hazardous radiation exposure.

DO NOT remove or deface any warning or caution labels. Removing labelsincreasesthe risk

of exposure to laser radiation.

ALWAYS make sure that any bystandersin the vicinity of use are made aware of the dangers

of looking directly into the laser tool.

DO NOT place the laser tool in aposition that may cause anyone to stare into the laser beam

intentionally or unintentionally. Serious eye injury could result.

ALWAYS position the laser tool securely. Damage to the laser tool and/or serious injury to the

user could result if the laser tool fails.

ALWAYS use only the accessoriesthat are recommended by the manufacturer of your laser

tool. Use of accessoriesthat have been designed for use with other laser toolscould result in

serious injury.

DO NOT use thislaser tool for any purpose other than those outlined in thismanual. Thiscould

result in serious injury.

DO NOT leave the laser tool “ON” unattended in any operating mode.

DO NOT disassemble the laser tool. There are no user serviceable partsinside.

DO NOT modify the product in any way. Modifying the laser tool may result in hazardous laser

radiation exposure.

DO NOT use the laser viewing glassesas safety goggles. The laser viewing glassesare used

for improved visualization of the laser beam, but they do not protect against laser radiation.

DO NOT use the laser viewing glassesas sun glassesor in traffic. The laser viewing glasses

do not afford complete UV protection and reduce color perception.

DO NOT use any optical toolssuch as, but not limited to, telescopesor transitsto view the

laser beam. Serious eye injury could result.

DO NOT stare directly at the laser beam or project the laser beam directly into the eyesof

others. Serious eye injury could result.

SAVE THESE INSTRUCTIONS

-5-

General Safety Rules

WARNING

Work area safety

Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

DO NOT operate the laser tool around

children or allow children to operate the

laser tool. Serious eye injury could result.

Electrical safety

Batteries can explode or

leak, cause injury or fire.

To reduce thisrisk, alwaysfollow all

instructionsand warningson the battery label

and package.

DO NOT short any battery terminals.

DO NOT charge alkaline batteries.

DO NOT mix old and new batteries. Replace

all of them at the same time with new

batteriesof the same brand and type.

DO NOT mix battery chemistries.

Dispose of or recycle batteriesper

local code.

DO NOT dispose of batteriesin fire.

Keep batteriesout of reach of children.

Remove batteriesif the device will not be

used for several months.

Personal safety

Stay alert, watch what you are doing and

use common sense when operating a

tool. Do not use a tool while you are tired

or under the influence of drugs, alcohol

or medication. A moment of inattention

while operating atool may result in serious

personal injury or incorrect

measurement results.

Use safety equipment. Always wear eye

protection. Safety equipment such as dust

mask, non-skid safety shoes, hard hat, or

hearing protection used for appropriate

conditionswill reduce personal injuries.

Use and care

Use the correct tool for your application.

The correct tool will do the jobbetter

and safer.

Do not use the tool if the switch does not

turn it on and off. Any tool that cannot be

controlled with the switch isdangerous and

must be repaired.

Store idle tool out of the reach of children

and do not allow persons unfamiliar with

the tool or these instructions to operate

the tool. Toolsare dangerous in the hands

of untrained users.

Maintain tools. Check for misalignment or

binding of moving parts, breakage of

parts and any other condition that may

affect the operation. If damaged, tool

repaired before use. Many accidentsare

caused by poorly maintained tools.

Use the tool, accessories, etc., in

accordance with these instructions and in

the manner intended for the particular

type of tool, taking into account the

working conditions and the work to be

performed. Use of the tool for operations

different from those intended could result in a

hazardous situation.

Service

Have your tool serviced by a qualified

repair person using only identical

replacement parts. Thiswill ensure that the

safety of the tool ismaintained.

Develop a periodic maintenance schedule

for tool. When cleaning a tool be careful

not to disassemble any portion of the tool

since internal wires may be misplaced or

pinched or may be improperly mounted.

Certain cleaning agentssuch as gasoline,

carbon tetrachloride, ammonia, etc. may

damage plastic parts.

SAVE THESE INSTRUCTIONS.

-6-

WARNING

-7-

The numbering of the product featuresshown

refersto the illustration of the tool on the

graphic page 2.

1Exit opening for laser beam

2Automatic levelling indicator

3On/Off switch

4Latch of battery lid

5Battery lid

6Contact surface

7Laser warning label

8 Tripod mount 1/4"

9Protective case

10 Laser viewing glasses*

11 Tripod*

*The accessoriesillustrated or described are

not included as standard delivery.

Features

Working range

– Standard . . . . . . . . . . . . . . . . . . 30ft (10m)

Levelling Accuracy . . . . . . . ±7/32-in at 30-ft

(±5mm at 10m)

Self-levelling range,

typically . . . . . . . . . . . . . . . . . . . . . . . . . ±4°

Levelling duration,

typically . . . . . . . . . . . . . . . . . . . . . . . . . . .4 s

Operating temperature . . . . . . 41°F ~104°F

(+5°C ~+40°C)

Storage temperature . . . . . . . . .-4°F ~158°F

(–20°C ~+70°C)

Relative air humidity,

max. . . . . . . . . . . . . . . . . . . . . . . . . . .90 %

Laser class . . . . . . . . . . . . . . . . . . . . . . 2

Laser type . . . . . . . . . . . . . . .635 nm, <1mW

Tripod mount . . . . . . . . . . . . . . . . . . .1/4-20

Batteries. . . . . . . . . . . . .2 x 1.5 V LR6 (AA)

Operating lifetime, approx. . . . . . . . . . . .15 h

Weight . . . . . . . . . . . . . . . . . 0.88 lb(0.4kg)

Dimensions. . . . . . . .4-1/4” x 2-5/8” x 3.5/8”

(108x 66 x 92mm)

Please observe the article number on the

type plate of your tool. The trade namesof

the individual toolsmay vary.

Technical Data

Inserting/Replacing the Battery

Use only alkaline batteries.

To open the battery lid 5, press on the latch 4

and fold the battery lid up. Insert the

batteries. When inserting, pay attention to

the correct polarity according to the

representation on the inside of the

battery compartment.

Alwaysreplace all batteriesat the same time.

Only use batteriesfrom one brand and with

the identical capacity.

• Remove the batteries from the

tool when not using it for extended

periods. When storing for extended

periods, the batteriescan corrode and

discharge themselves.

The tool isintended for determining and checking horiontal and vertical lines.

The tool issuitable exclusively for operation in enclosed working sites.

Intended Use

Preparation

-8-

Initial Operation

• Protect the tool against moisture and

direct sun irradiation.

• Do not subject the tool to extreme

temperatures or variations in

temperature.

Asan example, do not leave it in vehicles

for longer periods. In case of large

variationsin temperature, allow the

tool to adjust to the ambient temperature

before putting it into operation.

• Avoid heavy impact or falling of the

tool. Damage to the tool can impair its

accuracy.After heavy impact or shock,

compare the laser line with aknown

horizontal or vertical reference line.

• Switch the tool off during transport.

When switching off, the leveling unit,

which can be damaged in case of intense

movement, islocked.

Switching On and Off

To switch on the tool, push the On/Off

switch 3to the “On” position. Immediately

after switching on, the tool sendstwo laser

beamsout of the exit opening 1.

• Do not point the laser beam at persons

or animals and do not look into the

laser beam yourself, not even from a

large distance.

To switch off the tool, push the On/Off

switch 3to the “Off” position. When

switching off, the levelling unit islocked.

•Do not leave the switched on tool

unattended and switch the tool off after

use. Other personscould be blinded by the

laser beam.

Automatic Leveling

Working with Automatic Leveling (see

figures A-B)

Position the tool on alevel and firm support,

hold it by the contact surfaces6against a

vertical surface or attach it to atripod 11.

After switching on, the leveling function

automatically compensatesirregularities

within the self-leveling range of ±4°. The

leveling isfinished as soon as the laser

beamsdo not move any more. The indicator

2lightsup green.

If the automatic leveling function isnot

possible, e. g. because the surface on which

the tool standsdeviatesby more than 4°

from the horizontal plane, the indicator 2

lightsup red and the laser isautomatically

switched off. In thiscase, bring the tool to

the level position or hold it by the contact

surfaces6straightly against avertical

surface, and wait for the selfleveling to take

place. Assoon as the tool iswithin the self-

leveling range of ±4° again, the indicator 2

lightsup green and the laser beamsare

switched on.

When not within the self-leveling range of

±4°, working with the tool isnot possible,

because it cannot be assured that the laser

beamsrun at aright angle to each other.

In case of ground vibrationsor position

changesduring operation, the tool is

automatically leveled in again. To avoid

errors, check the position of the horizontal

and vertical laser line with regard to the

reference pointsupon re-leveling.

Working Advice

• Always use the center of the laser line

for marking. The width of the laser line

changeswith the distance.

Operation

-9-

Working with the Tripod

(See figure C)

A tripod offersastable, height-adjustable

measuring support. Place the tool viathe

tripod mount 8onto the 1/4" male thread of

the tripod and screw the locking screw of the

tripod tight.

Holding Laterally against a Wall or Object

(see figure D)

For quick checking of heights, the tool can

be held by the contact surfaces6 laterally

against avertical wall, cabinets, etc. Take

care to hold the tool straightly and calmly.

Laser Viewing Glasses (Optional

Accessory)

The laser viewing glasses10, filter out the

ambient light. Thismakesthe red light of the

laser appear brighter for the eyes.

•Do not use the laser viewing glasses as

safety goggles. The laser viewing glasses

are used for improved visualization of the

laser beam, but they do not protect against

laser radiation.

• Do not use the laser viewing glasses as

sun glasses or in traffic. The laser

viewing glassesdo not afford complete UV

protection and reduce colour perception.

Use with Attachments

Store and transport the tool only in the

supplied protective case 9.

Keep the tool clean at all times.

Do not immerse the tool into water or

other fluids.

Wipe off debrisusing amoist and soft cloth.

Do not use any cleaning agentsor solvents.

Regularly clean the surfacesat the exit

opening of the laser in particular, and pay

attention to any fluff of fibers.

If the tool should fail despite the care taken in

manufacturing and testing procedures, repair

should be carried out by an authorized after-

salesservice center for Bosch power tools.

In all correspondence and spare parts

orders, please alwaysinclude the 10-digit

article number given on the type plate of

the tool.

For repairs, send in the tool in the case 9.

ENVIRONMENT PROTECTION

Recycle raw materials& batteries

instead of disposing of waste. The unit,

accessories, packaging & used batteriesshould

be sorted for environmentally friendly recycling

in accordance with the latest regulations.

Maintenance and Service

LIMITED WARRANTY OF BOSCH LASER AND

MEASURING TOOL PRODUCTS

Robert Bosch Tool Corporation ("Seller") warrantsto the original purchaser only, that all BOSCH laser and measuring tool productswill be

free from defectsin material or workmanship for aperiod of three (3) yearsfrom date of purchase.

SELLER'S SOLE OBLIGATION AND YOUR EXCLUSIVE REMEDY under thisLimited Warranty and, to the extent permitted by law, any

warranty or condition implied by law, shall be the repair or replacement of laser and measuring tool products, which are defective in material

or workmanship and which have not been misused, carelessly handled, or misrepaired by personsother than Seller or Seller Authorized

Service providers.

SELLER'S OBLIGATION AND YOUR REMEDY ARE FURTHER LIMITED AS FOLLOWS:

• 30-Day Money Back Refund or Replacement.If youare not completely satisfied with the performance of your laser or measuring tool

product, for any reason, youcan return it to BOSCH dealer within 30 daysof the date of purchase for afull refund or replacement. To

obtain this30-Day Refund or Replacement, your return must be accompanied by the original receipt for purchase of the laser or

measuring tool product. A maximum of 2 returnsper customer will be permitted.

• First Year– OTC Warranty.BOSCH will replace your laser or measuring tool product that has failed when used in conformance with

product instructionsand warnings, with anew laser or measuring tool product of comparable features, for free, any time during the first

year after purchase. Thiswarranty doesnot apply if your laser or measuring tool product failssolely due to the need for recalibration.

• 2- and 3-Year Exchange.BOSCH will replace your laser or measuring tool product that has failed when used in conformance with

product instructionsand warnings, with anew or reconditioned laser or measuring tool product of comparable features, for an exchange

cost. Thiswarranty doesnot apply if your laser or measuring tool product failssolely due to the need for recalibration.

For detailsto make aclaim under thisLimited Warranty please visit www.boschtools.com or call 1-877-267-2499.

ANY IMPLIED WARRANTIES SHALL BE LIMITED IN DURATION TO ONE YEAR FROM DATE OF PURCHASE. SOME STATES IN THE

U.S., AND SOME CANADIAN PROVINCES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE

ABOVE LIMITATION MAY NOT APPLY TO YOU.

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES (INCLUDING BUT NOT LIMITED

TO LIABILITY FOR LOSS OF PROFITS) ARISING FROM THE SALE OR USE OF THIS PRODUCT. SOME STATES IN THE U.S., AND

SOME CANADIAN PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM

STATE TO STATE IN THE U.S., OR PROVINCE TO PROVINCE IN CANADA AND FROM COUNTRY TO COUNTRY.

THIS LIMITED WARRANTY APPLIES ONLY TO PRODUCTS SOLD WITHIN THE UNITED STATES OF AMERICA, CANADA AND THE

COMMONWEALTH OF PUERTO RICO. FOR WARRANTY COVERAGE WITHIN OTHER COUNTRIES, CONTACT YOUR LOCAL

BOSCH DEALER OR IMPORTER.

-10-

Andere Handbücher für GLL 2-10 Professional

Inhaltsverzeichnis

Sprachen:

Andere Bosch Laser-Nivelliergerät Handbücher

Bosch

Bosch GLL 3-15 Bedienungsanleitung

Bosch

Bosch PCL 1 Bedienungsanleitung

Bosch

Bosch GRL 150 HV Professional Bedienungsanleitung

Bosch

Bosch PLL 1 P Bedienungsanleitung

Bosch

Bosch GLL 2 Professional Bedienungsanleitung

Bosch

Bosch Zamo Bedienungsanleitung

Bosch

Bosch Professional GCL 2-50 C Bedienungsanleitung

Bosch

Bosch Quigo Plus Bedienungsanleitung

Bosch

Bosch PAM 220 Bedienungsanleitung

Bosch

Bosch 0601063J00 Bedienungsanleitung

Bosch

Bosch GLL 2-80 P Bedienungsanleitung

Bosch

Bosch GRL145HV - NA Horizontal And Vertical Electronic Self-Leveling... Montageanleitung

Bosch

Bosch GRL 500 HV Bedienungsanleitung

Bosch

Bosch GLL2-80 Bedienungsanleitung

Bosch

Bosch Quigo Bedienungsanleitung

Bosch

Bosch GLL25-10 Montageanleitung

Bosch

Bosch GPL 3 Professional Bedienungsanleitung

Bosch

Bosch GLL 5-50 X Professional Bedienungsanleitung

Bosch

Bosch GRL 400 H Professional Bedienungsanleitung

Bosch

Bosch GLL3-330C Montageanleitung

Bosch

Bosch GLL50-40G Montageanleitung

Bosch

Bosch GLL 2-10 Professional Bedienungsanleitung

Bosch

Bosch GLL 2-80 P Professional Bedienungsanleitung

Bosch

Bosch GLL 2-50 Professional Bedienungsanleitung

Beliebte Laser-Nivelliergerät Handbücher anderer Marken

Nedo

Nedo ET-5 Bedienungsanleitung

geo-FENNEL

geo-FENNEL Maxi-Liner FL 65 HP Bedienungsanleitung

LaserLiner

LaserLiner X2-Laser Bedienungsanleitung

Spectra

Spectra LL300N Bedienungsanleitung

geo-FENNEL

geo-FENNEL Selection PRO FLG 40-PowerCross GREEN SP Bedienungsanleitung

Nedo

Nedo Crossliner 4 Bedienungsanleitung

Lasertec

Lasertec FX360G Bedienungsanleitung

Flex

Flex ALC 8 Bedienungsanleitung

Black & Decker

Black & Decker LZR5 Bedienungsanleitung

Johnson

Johnson 40-6692 Bedienungsanleitung

Cocraft

Cocraft HL 20-SG Bedienungsanleitung

Zircon

Zircon iLine Bedienungsanleitung

HWH

HWH 310 SERIES Bedienungsanleitung

Leica

Leica iCON robot 60 Bedienungsanleitung

LaserLiner

LaserLiner SuperCross-Laser SCL 2 Bedienungsanleitung

LaserLiner

LaserLiner ActiveFinder XP Bedienungsanleitung

DeWalt

DeWalt DW082 Bedienungsanleitung

imex

imex EL20 Bedienungsanleitung