Bosch VIP-X1XF Bedienungsanleitung

VIP X1 XF

VIPX1XF

en Installation and Operating Manual

VIP X1 XF Table of Contents | en 3

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.1 | 2010.02

Table of Contents

1Preface 6

1.1 About this Manual 6

1.2 Conventions in this Manual 6

1.3 Intended Use 6

1.4 EU Directives 7

1.5 Rating Plate 7

2 Safety Information 8

2.1 Electric Shock Hazard 8

2.2 Installation and Operation 8

2.3 Maintenance and Repair 8

3 Product Description 9

3.1 Scope of Delivery 9

3.2 System Requirements 10

3.3 Overview of Functions 11

3.4 Connections, Controls and Displays 14

4 Installation 15

4.1 Preparations 15

4.2 Mounting 16

4.3 Connections 17

4.4 Power On/Power Off 19

4.5 Setup Using Configuration Manager 19

5 Configuration Using a Web Browser 21

5.1 Connecting 21

5.2 Configuration Menu 23

5.3 Basic Mode: Device Access 25

5.4 Basic Mode: Date/Time 27

5.5 Basic Mode: Network 28

5.6 Basic Mode: Encoder Profile 29

5.7 Basic Mode: Audio 30

5.8 Basic Mode: Recording 31

5.9 Basic Mode: System Overview 31

5.10 Advanced Mode: Identification 32

5.11 Advanced Mode: Password 34

5.12 Advanced Mode: Date/Time 35

5.13 Advanced Mode: Display Stamping 37

5.14 Advanced Mode: Appearance 39

5.15 Advanced Mode: LIVEPAGE Functions 40

5.16 Advanced Mode: Logging 42

5.17 Advanced Mode: Video Input 43

5.18 Advanced Mode: Picture Settings 44

5.19 Advanced Mode: Encoder Profile 45

4en | Table of Contents VIP X1 XF

DOC | V4.1 | 2010.02 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

5.20 Advanced Mode: Encoder Streams 48

5.21 Advanced Mode: Audio 50

5.22 Advanced Mode: Storage Management 51

5.23 Advanced Mode: Recording Profiles 54

5.24 Advanced Mode: Retention Time 56

5.25 Advanced Mode: Recording Scheduler 57

5.26 Advanced Mode: Recording Status 59

5.27 Advanced Mode: Alarm Connections 59

5.28 Advanced Mode: VCA 62

5.29 Advanced Mode: VCA Profiles 63

5.30 Advanced Mode: VCA Scheduled 68

5.31 Advanced Mode: VCA Event triggered 70

5.32 Advanced Mode: Audio Alarm 71

5.33 Advanced Mode: Alarm E-Mail 72

5.34 Advanced Mode: Alarm Task Editor 74

5.35 Advanced Mode: Alarm Inputs 75

5.36 Advanced Mode: Relay 75

5.37 Advanced Mode: COM1 77

5.38 Advanced Mode: Network 78

5.39 Advanced Mode: Advanced 82

5.40 Advanced Mode: Multicasting 83

5.41 Advanced Mode: JPEG Posting 84

5.42 Advanced Mode: Encryption 85

5.43 Advanced Mode: Maintenance 86

5.44 Advanced Mode: Licenses 88

5.45 Advanced Mode: System Overview 88

5.46 Function Test 89

6Operation 90

6.1 Operation with Microsoft Internet Explorer 90

6.2 The LIVEPAGE 92

6.3 Saving Snapshots 95

6.4 Recording Video Sequences 95

6.5 Running Recording Program 95

6.6 The RECORDINGS Page 96

6.7 Installing Player 98

6.8 Hardware Connections Between Video Servers 99

6.9 Operation Using Software Decoders 101

7 Maintenance and Upgrades 102

7.1 Testing the Network Connection 102

7.2 Unit Reset 102

7.3 Repairs 103

7.4 Transfer and Disposal 103

8 Appendix 104

8.1 Troubleshooting 104

8.2 General Malfunctions 105

8.3 Malfunctions with iSCSI Connections 107

VIP X1 XF Table of Contents | en 5

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.1 | 2010.02

8.4 LEDs 108

8.5 Processor Load 109

8.6 Network Connection 109

8.7 Serial Interface 109

8.8 Terminal Block 110

8.9 Communication with Terminal Program 111

8.10 Copyrights 113

9 Specifications 114

9.1 Unit 114

9.2 Protocols/Standards 115

Glossary 116

Index 120

6en | Preface VIP X1 XF

DOC | V4.1 | 2010.02 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

1Preface

1.1 About this Manual

This manual is intended for persons responsible for the installation and operation of the

VIP X1 XF. International, national and any regional electrical engineering regulations must be

followed at all times. Relevant knowledge of network technology is required. The manual

describes the installation and operation of the unit.

1.2 Conventions in this Manual

In this manual, the following symbols and notations are used to draw attention to special

situations:

1.3 Intended Use

The VIP X1 XF network video server transfers video, audio and control signals over data

networks (Ethernet LAN, Internet). There are various memory options for recording the

images captured by the connected camera. The unit is intended for use with CCTV systems.

Various functions can be triggered automatically by incorporating external alarm sensors.

Other applications are not permitted.

In the event of questions concerning the use of the unit which are not answered in this

manual, please contact your sales partner or:

Bosch Sicherheitssysteme GmbH

Werner-von-Siemens-Ring 10

85630 Grasbrunn

Germany

www.boschsecurity.com

CAUTION!

This symbol indicates that failure to follow the safety instructions described may endanger

persons and cause damage to the unit or other equipment.

It is associated with immediate, direct hazards.

NOTICE!

This symbol refers to features and indicates tips and information for easier, more convenient

use of the unit.

VIP X1 XF Preface | en 7

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.1 | 2010.02

1.4 EU Directives

The VIP X1 XF network video server complies with the requirements of EU Directives 89/336

(Electromagnetic Compatibility) and 73/23, amended by 93/68 (Low Voltage Directive).

1.5 Rating Plate

For exact identification, the model name and serial number are inscribed on the bottom of the

housing. Please make a note of this information before installation, if necessary, so as to have

it to hand in case of questions or when ordering spare parts.

8en | Safety Information VIP X1 XF

DOC | V4.1 | 2010.02 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

2 Safety Information

2.1 Electric Shock Hazard

– Never attempt to connect the unit to any power network other than the type for which it

is intended.

– Use only power supply units with UL approval and a power output according to LPS or

NEC Class 2.

– Never open the housing.

– Never open the housing of the power supply unit.

– If a fault occurs, disconnect the power supply unit from the power supply and from all

other units.

– Install the power supply and the unit only in a dry, weather-protected location.

– If safe operation of the unit cannot be ensured, remove it from service and secure it to

prevent unauthorized operation. In such cases, have the unit checked by Bosch Security

Systems.

Safe operation is no longer possible in the following cases:

– if there is visible damage to the unit or power cables,

– if the unit no longer operates correctly,

– if the unit has been exposed to rain or moisture,

– if foreign bodies have penetrated the unit,

– after long storage under adverse conditions, or

– after exposure to extreme stress in transit.

2.2 Installation and Operation

– The relevant electrical engineering regulations and guidelines must be complied with at

all times during installation.

– Relevant knowledge of network technology is required to install the unit.

– Before installing or operating the unit, make sure you have read and understood the

documentation for the other equipment connected to it, such as cameras. The

documentation contains important safety instructions and information about permitted

uses.

– Perform only the installation and operation steps described in this manual. Any other

actions may lead to personal injury, damage to property or damage to the equipment.

2.3 Maintenance and Repair

– Never open the housing of the VIP X1 XF. The unit does not contain any user-serviceable

parts.

– Never open the housing of the power supply unit. The power supply unit does not contain

any user-serviceable parts.

– Ensure that all maintenance or repair work is carried out only by qualified personnel

(electrical engineers or network technology specialists).

VIP X1 XF Product Description | en 9

Bosch Sicherheitssysteme GmbH Installation and Operating Manual DOC | V4.1 | 2010.02

3 Product Description

3.1 Scope of Delivery

– VIP X1 XF network video server

– 2 terminal blocks

– 4 self-adhesive elastic bumpers

– 1 wall-mounting panel

–2screws

– 2 wall plugs

– 1 Quick Installation Guide

– Product CD with the following content:

– Quick Installation Guide

–Manual

– System Requirements document

– Further documentation on Bosch Security Systems products

– Configuration Manager

–MPEGActiveXcontrol

– Player and Archive Player

– DirectX control

– Sun JVM

– Adobe Acrobat Reader

NOTICE!

Check that the delivery is complete and in perfect condition. Arrange for the unit to be

checked by Bosch Security Systems if you find any damage.

10 en | Product Description VIP X1 XF

DOC | V4.1 | 2010.02 Installation and Operating Manual Bosch Sicherheitssysteme GmbH

3.2 System Requirements

General Requirements

– Computer with Windows XP or Windows Vista operating system

– Network access (Intranet or Internet)

– Screen resolution at least 1,024 × 768 pixels

– 16- or 32-bit color depth

– Installed Sun JVM

Additional Configuration Requirements

– Microsoft Internet Explorer (version 7.0 or higher)

– Installed Configuration Manager program (version 3.1 or higher)

Additional Operational Requirements

– Microsoft Internet Explorer (version 7.0 or higher)

– Receiver software, for example VIDOS (version 4.01 or higher) or Bosch Video

Management System (version 2.2 or higher)

– H.264 compatible hardware decoder from Bosch Security Systems (for example VIP XD)

as a receiver and connected video monitor

– For playing back recordings: connection to storage medium

NOTICE!

Also note the information in the System Requirements document on the product CD

supplied. If necessary, you can install the required programs and controls from the product

CD supplied (see Section 3.1 Scope of Delivery, page 9).

The Web browser must be configured to enable Cookies to be set from the IP address of the

unit.

In Windows Vista, deactivate protected mode on the Security tab under Internet Options.

You can find notes on using Microsoft Internet Explorer in the online Help in Internet Explorer.

Andere Handbücher für VIP-X1XF

Inhaltsverzeichnis

Andere Bosch Netzwerk-Hardware Handbücher

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl S67-S3-BK-DI8-M8 Benutzerhandbuch

Bosch

Bosch VIP X1600 M4S Bedienungsanleitung

Bosch

Bosch LTC 4600 Series Bedienungsanleitung

Bosch

Bosch VJT-X40SN Bedienungsanleitung

Bosch

Bosch VIDEOJET X20 Montageanleitung

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch VideoJet X10/X20/X40 Bedienungsanleitung

Bosch

Bosch Rexroth IndraControl XFE01.1-SY-01 Bedienungsanleitung

Bosch

Bosch DIVAR IP 6000 (2U) Bedienungsanleitung

Bosch

Bosch VideoJet 8008 Bedienungsanleitung

Bosch

Bosch D9210C Fehlerbehebungshandbuch

Bosch

Bosch DIVAR IP 3000 DIP-3040-00N Bedienungsanleitung

Bosch

Bosch VIP-X1XF Bedienungsanleitung

Bosch

Bosch VideoJet X10 Bedienungsanleitung

Bosch

Bosch VIDEOJET X40 Montageanleitung

Bosch

Bosch VIP X1600 Module Betriebsanleitung

Bosch

Bosch VideoJet X40 SN Bedienungsanleitung

Bosch

Bosch DIVAR IP 7000 2U Bedienungsanleitung

Bosch

Bosch VIP XD Bedienungsanleitung

Bosch

Bosch VIP X1600 Module Bedienungsanleitung

Bosch

Bosch VIP X1 Bedienungsanleitung

Bosch

Bosch VideoJet 8008 Bedienungsanleitung

Bosch

Bosch VIP-X1XF Bedienungsanleitung

Beliebte Netzwerk-Hardware Handbücher anderer Marken

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Bedienungsanleitung

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Bedienungsanleitung

Yudor

Yudor YDS-16 Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-320L Bedienungsanleitung

Samsung

Samsung ES1642dc Gebrauchsanweisung

Honeywell Home

Honeywell Home LTEM-PV Montageanleitung

evertz

evertz 7700 Series Bedienungsanleitung

D-Link

D-Link ShareCenter DNS-343 Bedienungsanleitung

Asante

Asante AsanteBridge 1012 Bedienungsanleitung

FireBrick

FireBrick FB2700 Bedienungsanleitung

Audiovox Electronics

Audiovox Electronics ARWH2T Bedienungsanleitung

ADC

ADC DSX-1 Handbuch

NetComm

NetComm NF2 Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 5620 Bedienungsanleitung

Dell EMC

Dell EMC XC6420 Series Bedienungsanleitung

Lanner

Lanner NCA-1020A Bedienungsanleitung

Allied Telesis

Allied Telesis AT-TN121-A Bedienungsanleitung

Arista

Arista CCA-ETM-Q12 Bedienungsanleitung