Bosch AUTODOME 7000 HD Handbuch

SOP for CCTVs in SunGuide

BOSCH AutoDome 7000 HD

This Standard Operating Procedure is to provide a standard configuration for CCTV cameras in

District 5 for consistent operation in SunGuide, VLC and IVEDDS. Standard settings to check:

Network settings, Video/Encoder settings, SNTP (time server type), IP addresses, PTZ settings,

Date and Time, RTSP port, NTCIP (port and address), and On Screen Display (ODS).

The following SOP is for the BOSCH AutoDome 7000 HD (7230) IP camera.

Log into the camera, using Internet Explorer or Chrome to access the camera’s user interface.

Type in the default IP address.

Enter the following:

Enter the user name: <service>

Enter the password: <Default>

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Configuration”.

SOP for CCTVs in SunGuide

Click on “Network”.

Click on “Network Access”.

NOTE: Click Set/SAVE after every configuration setting for that window before moving to the

next menu item.

SOP for CCTVs in SunGuide

1. Network settings:

Set the following parameters for the “Network Access”.

DHCP is disabled <Off>

IP address <10.X.X.X>

Subnet mask <255.255.255.X>

Gateway <10.X.X.X>

SOP for CCTVs in SunGuide

Click “Set and Reboot”.

After Reboot, log into the camera, use Internet Explorer or Chrome to access the camera’s

user interface. Type in the assigned IP address.

Enter the following:

Enter the user name: <service>

Enter the password: <Default>

Click “OK”.

SOP for CCTVs in SunGuide

Click on “Configuration”.

Click on “Network.”

Click on “DynDNS.”

Set the following parameters for the “DynDNS” setting.

DynDNS is disabled <Off>

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network.”

Click on “Advanced.”

SOP for CCTVs in SunGuide

Set the following parameters for the “Advanced” setting.

RTSP Port: < 554 >

NTCIP Port: < 4439 >

NTCIP Address: < 1 >

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network”.

Click on “Network Management”.

Set the following parameters for the “Network Management” setting.

SNMP: < On >

UPnP: < Off >

Click “Set”.

SOP for CCTVs in SunGuide

Click on “Network.”

Click on “Multicast”

Set the following parameters for the “Multicast” setting Stream 1 and Stream 2.

Enable: < check box >

Multicast Address: < If provided 232.219.X.X >

Port: (Stream 1) < 5554 >, (Stream 2) < 5556 >

Streaming: < check box >

Multicast packet TTL: < 64 >

(NOTE: The same multicast IP is used for both stream 1 and stream2)

Click “Set”.

Andere Bosch Sicherheitskamera Handbücher

Bosch

Bosch DINION XF LTC 0495 Installationsanleitung

Bosch

Bosch VG4-100 Series Bedienungsanleitung

Bosch

Bosch VEZ Series Handbuch

Bosch

Bosch MIC IP starlight 7000i Bedienungsanleitung

Bosch

Bosch NBN-80122 Bedienungsanleitung

Bosch

Bosch DINION IP starlight 7000 HD Bedienungsanleitung

Bosch

Bosch WZ16 Bedienungsanleitung

Bosch

Bosch VOT-320V019L Bedienungsanleitung

Bosch

Bosch NWD-455 FlexiDome Bedienungsanleitung

Bosch

Bosch Dinion XF LTC 0495/61 Bedienungsanleitung

Bosch

Bosch HD Conference Dome Camera Bedienungsanleitung

Bosch

Bosch MIC Series 550 Bedienungsanleitung

Bosch

Bosch Autodome IP 4000 HD Bedienungsanleitung

Bosch

Bosch NEI-Series Bedienungsanleitung

Bosch

Bosch Autodome IP 4000 HD Bedienungsanleitung

Bosch

Bosch AutoDome VG5-825-ECEV Bedienungsanleitung

Bosch

Bosch VDC-240V03-1 Bedienungsanleitung

Bosch

Bosch Dinion XF LTC 0620/11 Installationsanleitung

Bosch

Bosch LTC 0498 Series Bedienungsanleitung

Bosch

Bosch VOT-320 Bedienungsanleitung

Bosch

Bosch MIC Series 440 Installationsanleitung

Bosch

Bosch VG4 Series Bedienungsanleitung

Bosch

Bosch NWC?0495 Bedienungsanleitung

Bosch

Bosch LTC-0485-21 Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung