Bosch NDC-225-P Bedienungsanleitung
IP Dome Camera 200 Series
NDC-255-P / NDC-225-P
en Installation and Operation Manual
IP Camera 200 Series Table of Contents | en 3
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
Table of Contents
1Safety 7
1.1 Safety precautions 7
1.2 Important safety instructions 8
1.3 FCC & ICES compliance 9
1.4 UL certification 11
1.5 Bosch notices 11
1.6 Copyrights 12
2 Introduction 13
2.1 Features 13
2.2 Unpacking 14
3 Installation 15
3.1 Disassembly 15
3.2 MicroSDHC card 16
3.3 Power connection 17
3.3.1 DC power connection 17
3.4 Network (and power) connector 18
3.5 I/O connector 19
3.6 Audio connectors 20
3.7 Mounting 21
3.8 Camera set-up 22
3.8.1 Camera positioning 22
3.8.2 Focal length and focus (NDC-255-P) 24
3.9 Resetting the camera 25
3.10 Closing the unit 25
4 Browser connection 26
4.1 System requirements 26
4.2 Establishing the connection 26
4.2.1 Password protection in camera 27
4.3 Protected network 27
4.4 Connection established 28
4en | Table of Contents IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
4.4.1 LIVEPAGE 28
4.4.2 RECORDINGS 28
4.4.3 SETTINGS 28
5 Basic Mode 30
5.1 Basic Mode menu tree 30
5.2 Device Access 31
5.2.1 Camera name 31
5.2.2 Password 31
5.3 Date/Time 32
5.4 Network 33
5.5 Encoder Profile 34
5.6 Audio 34
5.7 Recording 34
5.7.1 Storage medium 34
5.8 System Overview 34
6 Advanced Mode 35
6.1 Advanced Mode menu tree 35
6.2 General 36
6.2.1 Identification 36
6.2.2 Password 36
6.2.3 Date/Time 37
6.2.4 Display Stamping 39
6.3 Web Interface 41
6.3.1 Appearance 41
6.3.2 LIVEPAGE Functions 42
6.3.3 Logging 43
6.4 Camera 44
6.4.1 Encoder Profile 44
6.4.2 Encoder Streams 47
6.4.3 Video 48
6.4.4 Audio 49
6.4.5 Installer Options 49
6.5 Recording 50
6.5.1 Storage Management 51
IP Camera 200 Series Table of Contents | en 5
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
6.5.2 Recording Profiles 54
6.5.3 Retention Time 55
6.5.4 Recording Scheduler 56
6.5.5 Recording Status 57
6.6 Alarm 58
6.6.1 Alarm Connections 58
6.6.2 Video Content Analyses (VCA) 61
6.6.3 VCA configuration- Profiles 62
6.6.4 VCA configuration - Scheduled 68
6.6.5 VCA configuration - Event triggered 70
6.6.6 Audio Alarm 71
6.6.7 Alarm E-Mail 72
6.7 Interfaces 74
6.7.1 Alarm input 74
6.7.2 Relay 74
6.8 Network 76
6.8.1 Network 76
6.8.2 Advanced 80
6.8.3 Multicasting 81
6.8.4 JPEG Posting 82
6.9 Service 84
6.9.1 Maintenance 84
6.9.2 System Overview 86
7 Operation via the browser 87
7.1 Livepage 87
7.1.1 Processor load 87
7.1.2 Image selection 88
7.1.3 Digital I/O 88
7.1.4 System Log / Event Log 88
7.1.5 Saving snapshots 88
7.1.6 Recording video sequences 88
7.1.7 Running recording program 89
7.1.8 Audio communication 89
7.2 Recordings page 90
7.2.1 Controlling playback 91
6en | Table of Contents IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
8Troubleshooting 93
8.1 Resolving problems 93
8.2 Customer service 93
9 Maintenance 94
9.1 Repairs 94
9.1.1 Transfer and disposal 94
10 Technical Data 95
10.1 Specifications 95
10.1.1 Accessories 96
IP Camera 200 Series Safety | en 7
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
1Safety
1.1 Safety precautions
DANGER!
High risk: This symbol indicates an imminently hazardous
situation such as "Dangerous Voltage" inside the product.
If not avoided, this will result in an electrical shock, serious
bodily injury, or death.
WARNING!
Medium risk: Indicates a potentially hazardous situation.
If not avoided, this could result in minor or moderate bodily
injury.
CAUTION!
Low risk: Indicates a potentially hazardous situation.
If not avoided, this could result in property damage or risk of
damage to the device.
8en | Safety IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
1.2 Important safety instructions
Read, follow, and retain for future reference all of the following
safety instructions. Heed all warnings on the unit and in the
operating instructions before operating the unit.
1. Cleaning - Generally, using a dry cloth for cleaning is
sufficient but a moist, fluff-free cloth or leather shammy
may also be used. Do not use liquid cleaners or aerosol
cleaners.
2. Heat Sources - Do not install the unit near any heat
sources such as radiators, heaters, stoves, or other
equipment (including amplifiers) that produce heat.
3. Water - Never spill liquid of any kind on the unit.
4. Lightning - Take precautions to protect the unit from
power and lightning surges.
5. Controls adjustment - Adjust only those controls specified
in the operating instructions. Improper adjustment of
other controls may cause damage to the unit.
6. Power sources - Operate the unit only from the type of
power source indicated on the label.
7. Servicing - Unless qualified, do not attempt to service this
unit yourself. Refer all servicing to qualified service
personnel.
8. Replacement parts - Use only replacement parts specified
by the manufacturer.
9. Installation - Install in accordance with the manufacturer's
instructions and in accordance with applicable local codes.
10. Attachments, changes or modifications - Only use
attachments/accessories specified by the manufacturer.
Any change or modification of the equipment, not
expressly approved by Bosch, could void the warranty or,
in the case of an authorization agreement, authority to
operate the equipment.
IP Camera 200 Series Safety | en 9
Bosch Security Systems Installation and Operation Manual AR18-09-B003 | v1.1 | 2010.05
1.3 FCC & ICES compliance
FCC & ICES Information
(U.S.A. and Canadian Models Only)
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
– reorient or relocate the receiving antenna;
– increase the separation between the equipment and
receiver;
– connect the equipment into an outlet on a circuit different
from that to which the receiver is connected;
– consult the dealer or an experienced radio/TV technician
for help.
Intentional or unintentional modifications, not expressly
approved by the party responsible for compliance, shall not be
made. Any such modifications could void the user's authority to
operate the equipment. If necessary, the user should consult
the dealer or an experienced radio/television technician for
corrective action.
The user may find the following booklet, prepared by the
Federal Communications Commission, helpful: How to Identify
and Resolve Radio-TV Interference Problems. This booklet is
available from the U.S. Government Printing Office,
Washington, DC 20402, Stock No. 004-000-00345-4.
10 en | Safety IP Camera 200 Series
AR18-09-B003 | v1.1 | 2010.05 Installation and Operation Manual Bosch Security Systems
Informations FCC et ICES
(modèles utilisés aux États-Unis et au Canada uniquement)
Suite à différents tests, cet appareil s'est révélé conforme aux
exigences imposées aux appareils numériques de classe B, en
vertu de la section 15 du règlement de la Commission fédérale
des communications des États-Unis (FCC), et en vertu de la
norme ICES-003 d'Industrie Canada. Ces exigences visent à
fournir une protection raisonnable contre les interférences
nuisibles lorsque l'appareil est utilisé dans le cadre d'une
installation résidentielle. Cet appareil génère, utilise et émet
de l'énergie de radiofréquences et peut, en cas d'installation ou
d'utilisation non conforme aux instructions, engendrer des
interférences nuisibles au niveau des radiocommunications.
Toutefois, rien ne garantit l'absence d'interférences dans une
installation particulière. Il est possible de déterminer la
production d'interférences en mettant l'appareil
successivement hors et sous tension, tout en contrôlant la
réception radio ou télévision. L'utilisateur peut parvenir à
éliminer les interférences éventuelles en prenant une ou
plusieurs des mesures suivantes:
– Modifier l'orientation ou l'emplacement de l'antenne
réceptrice;
– Éloigner l'appareil du récepteur;
– Brancher l'appareil sur une prise située sur un circuit
différent de celui du récepteur;
– Consulter le revendeur ou un technicien qualifié en radio/
télévision pour obtenir de l'aide.
Toute modification apportée au produit, non expressément
approuvée par la partie responsable de l'appareil, est
strictement interdite. Une telle modification est susceptible
d'entraîner la révocation du droit d'utilisation de l'appareil.
La brochure suivante, publiée par la Commission fédérale des
communications (FCC), peut s'avérer utile : How to Identify and
Resolve Radio-TV Interference Problems. Cette brochure est
disponible auprès du U.S. Government Printing Office,
Washington, DC 20402, États-Unis, sous la référence n° 004-
000-00345-4.
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Bosch Sicherheitskamera Handbücher
Bosch
Bosch MIC Series 440 Installationsanleitung
Bosch
Bosch Dinion XF LTC 0495/11 Bedienungsanleitung
Bosch
Bosch AutoDome VG5-825-ECEV Bedienungsanleitung
Bosch
Bosch FlexiDomeXF VDC-485V03-20 Bedienungsanleitung
Bosch
Bosch VCN-9095 Bedienungsanleitung
Bosch
Bosch MIC440AXWUD14636N Bedienungsanleitung
Bosch
Bosch LTC 0498 Series Bedienungsanleitung
Bosch
Bosch FlexiDome NDN-832 Bedienungsanleitung
Bosch
Bosch FlexiDomeXF VDC-485V03-20 Bedienungsanleitung
Bosch
Bosch LTC 1462/21 Bedienungsanleitung
Bosch
Bosch MIC IP fusion 9000i Bedienungsanleitung
Bosch
Bosch MIC IP ultra 7100i Bedienungsanleitung
Bosch
Bosch VDN-498V03-21 Bedienungsanleitung
Bosch
Bosch VG5 600 Series Bedienungsanleitung
Bosch
Bosch FlexiDomeXF VDC-485V04-20 Bedienungsanleitung
Bosch
Bosch EX49N Bedienungsanleitung
Bosch
Bosch REG-D1-875XE-01 Bedienungsanleitung
Bosch
Bosch VG4-200 Series Bedienungsanleitung
Bosch
Bosch MIC Series 550 Bedienungsanleitung
Bosch
Bosch REG‑Z1‑8050‑XC‑00E‑01 Bedienungsanleitung
