Bosch MIYN46 Bedienungsanleitung

MIYN46 Wall Transmitter

970.035b | F.01U.278.521 | V2.0 | 2012.12

en User Manual US

MIYN46 Wall Transmitter | en 3

Bosch Security Systems User Manual US 970.035b | F.01U.278.521 | v2.0 | 2012.12

Table of Contents

1 Generalities 5

1.1 Resident Alert System 5

1.2 MIYN46 Wall Transmitter 5

2 Safety Instructions 6

2.1 Introduction 6

2.1.1 Principle 6

2.1.2 Importance of safety instructions 6

2.1.3 Disregarding safety rules 6

2.2 Environmental conditions 6

2.3 General safety instructions 7

2.3.1 Observation and information 7

2.4 Special safety instructions 7

3 Description 8

3.1 General description 8

3.1.1 Top view 8

3.2 Main functions 9

3.2.1 Red emergency call button 9

3.2.2 Blue assistance call button 9

3.2.3 Green acknowledgment button 9

3.2.4 Alarm signaling 9

4 Installation 10

4.1 Unpacking 10

4.1.1 List of contents 10

4.2 Installation 11

4.2.1 Generalities 11

4.2.2 Wall installation 11

4.2.3 Connecting to the power supply 12

4.2.4 Reset 12

4.2.5 Transmitter Identification 12

4.2.6 Operation Check 12

4.2.7 Replacing the battery 13

4.2.8 Configuration and Wiring 14

4.3 Inputs and Outputs 15

4.4 General inputs 15

4.5 Wired Outputs 15

4.6 Wired Inputs 15

4.7 General configuration 16

5Use 17

5.1 Call for Help 17

5.2 Call for Assistance 17

5.3 Call Acknowledgement (Staff Presence) 18

4en | MIYN46 Wall Transmitter

970.035b | F.01U.278.521 | v2.0 | 2012.12 User Manual US Bosch Security Systems

5.4 Reserve Call 18

5.5 Technical Alarm 18

5.6 Caregiver Arrival 18

5.7 Caregiver Departure 19

5.8 Daily Message and Battery Low Message 19

5.9 Error Message 19

6Operation 20

6.1 Description of the six different states 20

6.2 Legend of illustrations 21

6.3 Operation with the staff presence processing activated 21

6.3.1 Device behavior when pressing a button 21

6.4 Operation with the staff presence processing deactivated 24

6.4.1 Device behavior upon pressing a button 24

7Storage 25

7.1 Short term storage conditions 25

7.2 Long term storage conditions 25

8Disposal 26

8.1 Disassembly 26

8.2 Local disposal locations 26

8.3 Returning to the manufacturer 26

8.4 Materials 26

8.4.1 Battery 26

9 Appendix 27

9.1 Electrical specifications 27

9.2 Dimensions and weight 27

9.3 Operating temperature 27

9.4 FCC warning statement 27

MIYN46 Wall Transmitter Ge n e r a l i t i e s | e n 5

Bosch Security Systems User Manual US 970.035b | F.01U.278.521 | v2.0 | 2012.12

1 Generalities

1.1 Resident Alert System

Alarms and Messages arriving from Resident Alert System Transmitters such as the MIYN46

Wall Transmitter are managed and stored by the Main Unit.

1.2 MIYN46 Wall Transmitter

The MIYN46 Wall Transmitter is a multifunction terminal radio transmitter, designed for

residents and staff to make an emergency call, summon assistance or cancel a call directly in

the resident's room. It is part of a Resident Alert System, and is easily expandable.

In the Resident Alert System, the MIYN46 Wall Transmitter allows the resident of an

independent living or assisted living facility to easily alert the care personnel if needed. The

resident simply has to push the large red button. The system is then able to control and to

monitor the progress of the care personnel.

The alarm and event transmission is performed by radio. There is no need for a wired

connection between the MIYN46 Wall Transmitter and the Main Unit, this makes the system

installation easy and allows great mobility.

Depending on the model, two relay outputs are available and may be used to connect alarm

and staff presence indicators such as, for instance, the signal lamps installed above the door.

Two LED signal lamps allow the progress to be monitored on the device.

In this document you will find all the information you need for the installation and the use of

the MIYN46 Wall Transmitter.

6en | Safety Instructions MIYN46 Wall Transmitter

970.035b | F.01U.278.521 | v2.0 | 2012.12 User Manual US Bosch Security Systems

2 Safety Instructions

2.1 Introduction

2.1.1 Principle

2.1.2 Importance of safety instructions

Each safety and protection instruction in this manual must be adhered to in order to avoid

personnel injuries, property damages or environmental pollution.

In a similar manner, the legal bylaws, the measures in prevention of accidents and for the pro-

tection of the environment, as well as the recognized technical rules aiming at appropriate

and safe working conditions which as applied in the country and at the place of use of the

MIYN46 Wall Transmitter must be adhered to.

2.1.3 Disregarding safety rules

Disregarding the safety rules, as well as existing legal and technical regulations, may lead to

accidents, to property damages or to environmental pollution.

2.2 Environmental conditions

Install the MIYN46 Wall Transmitter in a dry place, away from any source of heat.

WARNING!

The User / Installer should read and understand this chapter before any intervention on the

MIYN46 Wall Transmitter.

NOTICE!

In case of unclear information, please contact your local representative.

WARNING!

The MIYN46 Wall Transmitter must not be located near a water tap or any other source of

water.

The electrical safety of the MIYN46 Wall Transmitter is only guaranteed if the electrical instal-

lation is in accordance with the national regulations and if this installation works properly.

The MIYN46 Wall Transmitter may not be used in buildings prone to fire and explosion haz-

ards.

CAUTION!

The MIYN46 Wall Transmitter may not be used under exposure to the direct sunlight, to heat,

to dust or to an excessive humidity (only use the equipment in a clean environment).

CAUTION!

Interferences

Avoid immediate proximity to other electric devices such as a television.

MIYN46 Wall Transmitter Safety Instructions | en 7

Bosch Security Systems User Manual US 970.035b | F.01U.278.521 | v2.0 | 2012.12

2.3 General safety instructions

1. Switch off the MIYN46 Wall Transmitter: take out the battery or remove the power supply.

2. Dry up the MIYN46 Wall Transmitter.

3. Clean the MIYN46 Wall Transmitter.

4. Check its electrical functions.

2.3.1 Observation and information

In case of defective operation or any other technical incident for which no remedy is

described in this manual, please contact immediately your local representative.

2.4 Special safety instructions

Appropriate safety instructions linked to specific risks are described in the corresponding

section of this manual.

DANGER!

During maintenance operations, when the MIYN46 Wall Transmitter is powered and its casing

is removed, the MIYN46 Wall Transmitter may not be left unattended.

CAUTION!

The MIYN46 Wall Transmitter may only be connected to the electrical sources as described in

Section 4.2 Installation, page 11.

CAUTION!

Maintenance and repairs may only be performed in accordance with the instructions and by

authorized technical personnel only. The sole possession of the User Manual US does not

allow the personnel to perform any kind of repair on the MIYN46 Wall Transmitter. Take into

account all the warnings and follow all the instructions displayed on the MIYN46 Wall Trans-

mitter and those which are printed in the documentation.Never try to use replacement pieces

other than those authorized by the manufacturer of the MIYN46 Wall Transmitter.

CAUTION!

It is mandatory to use the products specified in the present User Manual US to clean the

MIYN46 Wall Transmitter. If you plan to use another product, only do so after having obtained

the authorization of the manufacturer.

WARNING! Electro Static Discharge

The MIYN46 Wall Transmitter contains highly sensitive electronic components. It should be

opened only in an ESD protected environment with respect to the following precautions:

Discharge yourself from electrostatic loads by touching a grounded conductive surface

before opening the unit.

Avoid touching conductive parts inside the MIYN46 Wall Transmitter if not absolutely nec-

essary.

CAUTION!

Never let any liquid enter the system. In case of liquid spill inside the MIYN46 Wall Transmit-

ter, act immediately as follows:

8en | Description MIYN46 Wall Transmitter

970.035b | F.01U.278.521 | v2.0 | 2012.12 User Manual US Bosch Security Systems

3 Description

3.1 General description

3.1.1 Top view

Fig. 3.1 Top view

1. Red emergency call button

2. LED indicator for alarm

3. LED indicator for presence

4. Green acknowledgment button, to acknowledge an alarm locally.

5. Blue assistance call button

6. Socket for coded key insertion (option)

7. Installation compartment

8. Jack plug for pear-push button

MIYN46 Wall Transmitter Description | en 9

Bosch Security Systems User Manual US 970.035b | F.01U.278.521 | v2.0 | 2012.12

3.2 Main functions

The main function of the MIYN46 Wall Transmitter is to enable easier handling of emergencies

and help, directly from the resident’s room.

3.2.1 Red emergency call button

Its large red button with textured surface makes it easy to identify and to press, launching an

emergency call.

3.2.2 Blue assistance call button

If, upon arriving, the staff requires additional help, a call for assistance can be sent by

pressing the round blue button.

3.2.3 Green acknowledgment button

In all cases, there is an automatic call repetition until cancel of the call. Cancelling can be

made directly on the room transmitter with the smaller green button.

3.2.4 Alarm signaling

The presence and alarm LED indicators enhance the signaling of alarms.

The MIYN46 Wall Transmitter is easily expandable, as a socket for pear-push button is directly

accessible.

10 en | Installation MIYN46 Wall Transmitter

970.035b | F.01U.278.521 | v2.0 | 2012.12 User Manual US Bosch Security Systems

4 Installation

4.1 Unpacking

The MIYN46 Wall Transmitter is carefully packed for transportation. The components con-

tained in the box are protected, but should be handled with care. Store the packaging mate-

rial for further use (storage or transport).

1. Take the components out of the box and place the MIYN46 Wall Transmitter in front of

you.

2. Check each component in the box, in accordance with the list of contents below.

3. Check that the MIYN46 Wall Transmitter and its accessories have not been damaged dur-

ing transportation.

4.1.1 List of contents

NOTICE!

In case of defective or missing equipment, do not try to install the MIYN46 Wall Transmitter.

Contact immediately your local representative.

Description

MIYN46 Wall Transmitter

2 screws

2 screw anchors

1 CR2450 3V Lithium battery

User Manual US

Inhaltsverzeichnis

Andere Bosch Sender Handbücher

Bosch

Bosch S35 Bedienungsanleitung

Bosch

Bosch ISW-EN1210 Handbuch

Bosch

Bosch CRS-RM-905FI Bedienungsanleitung

Bosch

Bosch SE88 Bedienungsanleitung

Bosch

Bosch SEC-3402 Series Bedienungsanleitung

Bosch

Bosch RFKF-FB Bedienungsanleitung

Bosch

Bosch RADION RFUN Bedienungsanleitung

Bosch

Bosch ISW-EN1235DF Bedienungsanleitung

Bosch

Bosch SE3401 Bedienungsanleitung

Bosch

Bosch CRS-SB-424FI Bedienungsanleitung

Bosch

Bosch INTEGRUS Bedienungsanleitung

Bosch

Bosch ATX-TRM-304T01 Bedienungsanleitung

Bosch

Bosch Security Systems SE2 Series Handbuch

Bosch

Bosch RF3401E Bedienungsanleitung

Bosch

Bosch ISW-EN1261HT Bedienungsanleitung

Bosch

Bosch EN1210 Series Bedienungsanleitung

Bosch

Bosch SEC-RFPB60M-433 Bedienungsanleitung

Bosch

Bosch ISW-EN1210SK Bedienungsanleitung

Bosch

Bosch RF3401E Bedienungsanleitung

Bosch

Bosch ATX-TRM-304T01 Bedienungsanleitung

Bosch

Bosch CRS-MIYS37-FI Bedienungsanleitung

Bosch

Bosch SE-TRM-433T01 Bedienungsanleitung

Bosch

Bosch RADION RFUN-A Bedienungsanleitung

Bosch

Bosch ISW-EN1233 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung