Bosch NurseCall N46 Bedienungsanleitung

NurseCall N46 Wall Transmitter

en User Manual

NurseCall N46 Wall Transmitter | en 3

Bosch Security Systems User Manual 970.030 | v1.0 | 2009.06

Table of Contents

1 Identification 5

1.1 Document 5

1.2 Customer support addresses 6

2 Generalities 7

2.1 NurseCall System 7

2.2 NurseCall N46 Wall Transmitter 7

3 Safety Instructions 8

3.1 Introduction 8

3.1.1 Principle 8

3.1.2 Importance of safety instructions 8

3.1.3 Disregarding safety rules 8

3.2 Environmental conditions 8

3.3 General safety instructions 9

3.3.1 Observation and information 10

3.4 Special safety instructions 10

4 Description 11

4.1 General description 11

4.1.1 Top view 11

4.2 Main functions 12

4.2.1 Red emergency call button 12

4.2.2 Blue assistance call button 12

4.2.3 Green acknowledgment button 12

4.2.4 Alarm signaling 12

4.3 Options 12

4.3.1 Identification of the nurse group 12

4.3.2 Relay contacts for external signals 12

5 Installation 13

5.1 Unpacking 13

5.1.1 List of contents 13

5.2 Installation 14

5.2.1 Generalities 14

5.2.2 Wall installation 14

5.2.3 Connecting to the power supply 15

5.2.4 Reset 15

5.2.5 Transmitter Identification 15

5.2.6 Operation Check 15

5.2.7 Replacing the battery 16

5.2.8 Configuration and Wiring 17

5.3 Inputs and Outputs 18

5.4 General inputs 18

5.5 Wired Outputs 18

4en | NurseCall N46 Wall Transmitter

970.030 | v1.0 | 2009.06 User Manual Bosch Security Systems

5.6 Wired Inputs 18

5.7 General configuration 19

6Use 20

6.1 Call for Help 20

6.2 Call for Assistance 20

6.3 Call Acknowledgement (Staff Presence) 21

6.4 Call for Help 2 (reserve) 21

6.5 Technical Alarm 21

6.6 Caregiver Arrival 21

6.7 Caregiver Departure 22

6.8 Daily Message and Battery Low Message 22

6.9 Error Message 22

7Operation 23

7.1 Description of the six different states 23

7.2 Legend of illustrations 24

7.3 Operation with the staff presence processing activated 24

7.3.1 Device behavior when pressing a button 24

7.3.2 Device behavior during coded key insertion and removal 27

7.4 Operation with the staff presence processing deactivated 29

7.4.1 Device behavior upon pressing a button 29

7.4.2 Device behavior during coded key insertion and removal 30

8Storage 31

8.1 Short term storage conditions 31

8.2 Long term storage conditions 31

9Disposal 32

9.1 Disassembly 32

9.2 Local disposal locations 32

9.3 Returning to the manufacturer 32

9.4 Materials 32

9.4.1 Battery 32

10 Appendix 33

10.1 Electrical specifications 33

10.2 Dimensions and weight 33

10.3 Operating temperature 33

10.4 EC-Declaration of conformity 34

NurseCall N46 Wall Transmitter Identification | en 5

Bosch Security Systems User Manual 970.030 | v1.0 | 2009.06

1 Identification

1.1 Document

Name No.

User Manual 970.030

Table 1.1 Document No.

Version Description

v1.0 | 2009.06 First Edition

Table 1.2 Version Management

6en | Identification NurseCall N46 Wall Transmitter

970.030 | v1.0 | 2009.06 User Manual Bosch Security Systems

1.2 Customer support addresses

TeleAlarm SA Bosch Group

Rue du Pont 23

CH-2300 La Chaux-de-Fonds

Switzerland

Phone: +41 32 327 25 40

Bosch Security Systems BV

Postbus 80002

NL-5600 JB Eindhoven

Netherlands

Phone: +31 (0)900 8212499

Bosch Security Systems France

Atlantic 361

361, avenue du Général de Gaulle

F-92147 Clamart

France

Phone: + 33 (0)825 12 8000

Bosch Security Systems nv/sa

Torkonjestraat 21F

B-8510 Marke

Belgium

Phone: +32 (0)56 20 02 40

Bosch Sicherheitssysteme GmbH

Haus-ServiceRuf

Ingersheimer Straße 16

D-70499 Stuttgart

Germany

Phone: +49 (0)1805 47726724

Bosch Security Systems AB

Vestagatan 2

416 64 Göteborg

Sweden

Phone: +46 (0)31 722 5300

Bosch Security Systems Ltd

Broadwater Park

North Orbital Road

Denham

UB9 5HN

United Kingdom

Phone: +44 (0)1895 878088

NurseCall N46 Wall Transmitter Generalities | en 7

Bosch Security Systems User Manual 970.030 | v1.0 | 2009.06

2 Generalities

2.1 NurseCall System

Alarms and Messages arriving from NurseCall Transmitters such as the NurseCall N46 Wall

Transmitter are managed and stored by the NurseCall Main Unit. This unit is compatible with

the NurseCall Master.

2.2 NurseCall N46 Wall Transmitter

The NurseCall N46 Wall Transmitter is a multifunction terminal radio transmitter, designed for

patients and nursing staff to make an emergency call, summon assistance or cancel a call

directly in the patient’s room. It is part of a NurseCall system, and is easily expandable.

In the NurseCall system, the NurseCall N46 Wall Transmitter allows the resident of a home or

the patient of a clinic to easily alert the care personnel if needed. The patient simply has to

push the large red button. The system is then able to control and to monitor the progress of

the care personnel.

The alarm and event transmission is performed by radio. There is no need for a wired

connection between the NurseCall N46 Wall Transmitter and the NurseCall Main Unit, this

makes the system installation easy and allows great mobility.

Depending on the model, two relay outputs are available and may be used to connect alarm

and staff presence indicators such as, for instance, the signal lamps installed above the door.

Two LED signal lamps allow the progress to be monitored on the device.

In this document you will find all the information you need for the installation and the use of

the NurseCall N46 Wall Transmitter.

NOTICE!

The document "NurseCall General Overview" explains the system concept.

8en | Safety Instructions NurseCall N46 Wall Transmitter

970.030 | v1.0 | 2009.06 User Manual Bosch Security Systems

3 Safety Instructions

3.1 Introduction

3.1.1 Principle

3.1.2 Importance of safety instructions

Each safety and protection instruction in this manual must be adhered to in order to avoid

personnel injuries, property damages or environmental pollution.

In a similar manner, the legal bylaws, the measures in prevention of accidents and for the pro-

tection of the environment, as well as the recognized technical rules aiming at appropriate

and safe working conditions which as applied in the country and at the place of use of the

NurseCall N46 Wall Transmitter must be adhered to.

3.1.3 Disregarding safety rules

Disregarding the safety rules, as well as existing legal and technical regulations, may lead to

accidents, to property damages or to environmental pollution.

3.2 Environmental conditions

WARNING!

The User / Installer should read and understand this chapter before any intervention on the

NurseCall N46 Wall Transmitter.

NOTICE!

In case of unclear information, please contact your local representative.

WARNING!

The NurseCall N46 Wall Transmitter must not be located near a water tap or any other source

of water.

The electrical safety of the NurseCall N46 Wall Transmitter is only guaranteed if the electrical

installation is in accordance with the national regulations and if this installation works prop-

erly.

The NurseCall N46 Wall Transmitter may not be used in buildings prone to fire and explosion

hazards.

CAUTION!

The NurseCall N46 Wall Transmitter may not be used under exposure to the direct sunlight, to

heat, to dust or to an excessive humidity (only use the equipment in a clean environment).

NurseCall N46 Wall Transmitter Safety Instructions | en 9

Bosch Security Systems User Manual 970.030 | v1.0 | 2009.06

XInstall the NurseCall N46 Wall Transmitter in a dry place, away from any source of heat.

3.3 General safety instructions

CAUTION!

Interferences

Avoid immediate proximity to other electric devices such as a television.

DANGER!

Electrocution

During maintenance operations, when the NurseCall N46 Wall Transmitter is powered and its

casing is removed, the NurseCall N46 Wall Transmitter may not be left unattended.

CAUTION!

The NurseCall N46 Wall Transmitter may only be connected to the electrical sources as

described in Section 5.2 Installation, page 14.

CAUTION!

Maintenance and repairs may only be performed in accordance with the instructions and by

authorized technical personnel only.

The sole possession of the User Manual does not allow the personnel to perform any kind of

repair on the NurseCall N46 Wall Transmitter.

Take into account all the warnings and follow all the instructions displayed on the NurseCall

N46 Wall Transmitter and those which are printed in the documentation.

Never try to use replacement pieces other than those authorized by the manufacturer of the

NurseCall N46 Wall Transmitter.

CAUTION!

It is mandatory to use the products specified in the present User Manual to clean the Nurse-

Call N46 Wall Transmitter. If you plan to use another product, only do so after having obtained

the authorization of the manufacturer.

WARNING! Electro Static Discharge

The NurseCall N46 Wall Transmitter contains highly sensitive electronic components. It should

be opened only in an ESD protected environment with respect to the following precautions:

XDischarge yourself from electrostatic loads by touching a grounded conductive surface

before opening the unit.

XAvoid touching conductive parts inside the NurseCall N46 Wall Transmitter if not abso-

lutely necessary.

10 en | Safety Instructions NurseCall N46 Wall Transmitter

970.030 | v1.0 | 2009.06 User Manual Bosch Security Systems

1. Switch off the NurseCall N46 Wall Transmitter by taking out the battery or removing the

power supply.

2. Dry up the NurseCall N46 Wall Transmitter.

3. Clean the NurseCall N46 Wall Transmitter.

4. Check its electrical functions.

3.3.1 Observation and information

In case of defective operation or any other technical incident for which no remedy is

described in this manual, please contact immediately your local representative.

3.4 Special safety instructions

Appropriate safety instructions linked to specific risks are described in the corresponding

section of this manual.

CAUTION!

Never let any liquid enter the system. In case of liquid spill inside the NurseCall N46 Wall

Transmitter, act immediately as follows:

NOTICE!

For further information, please contact your local representative.

Inhaltsverzeichnis

Andere Bosch Sender Handbücher

Bosch

Bosch SE88A-90S-304 Bedienungsanleitung

Bosch

Bosch SE88 Bedienungsanleitung

Bosch

Bosch SEC-RFPB60M-433 Bedienungsanleitung

Bosch

Bosch RF3503E Bedienungsanleitung

Bosch

Bosch ISW-EN1235DF Bedienungsanleitung

Bosch

Bosch ISW-EN1233 Bedienungsanleitung

Bosch

Bosch CRS-SB-424FI Bedienungsanleitung

Bosch

Bosch CRS-SB-423FI Bedienungsanleitung

Bosch

Bosch RFKF-FB Bedienungsanleitung

Bosch

Bosch CRS-MIYS37-FI Bedienungsanleitung

Bosch

Bosch CRS-RM-905FI Bedienungsanleitung

Bosch

Bosch Security Systems SE2 Series Handbuch

Bosch

Bosch RADION RFUN Bedienungsanleitung

Bosch

Bosch SE3401 Bedienungsanleitung

Bosch

Bosch SEC-3402-304 Bedienungsanleitung

Bosch

Bosch ATX-TRM-304T01 Bedienungsanleitung

Bosch

Bosch ATX-TRM-304T01 Bedienungsanleitung

Bosch

Bosch ISW-EN1210 Handbuch

Bosch

Bosch RF3401E Bedienungsanleitung

Bosch

Bosch CRS-NC-S37L-US Bedienungsanleitung

Bosch

Bosch SE-TRM-433T01 Bedienungsanleitung

Bosch

Bosch ISW-EN1261HT Bedienungsanleitung

Bosch

Bosch S35 Bedienungsanleitung

Bosch

Bosch MIYN46 Bedienungsanleitung

Beliebte Sender Handbücher anderer Marken

NIVELCO

NIVELCO EasyTREK SCA-300 Series Betriebsanleitung

Honeywell

Honeywell 5816WMBR Bedienungsanleitung

Kamstrup

Kamstrup READy MTU Betriebsanleitung

Omega

Omega ZW Series Bedienungsanleitung

ABB

ABB Field 264H Leitfaden

Alinco

Alinco DJ-V17T Bedienungsanleitung

Dejero

Dejero EnGo 3x Bedienungsanleitung

Rosemount

Rosemount 4600 Bedienungsanleitung

Speaka Professional

Speaka Professional 2342740 Bedienungsanleitung

trubomat

trubomat GAB 1000 Bedienungsanleitung

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Bedienungsanleitung

Rondish

Rondish UT-11 Bedienungsanleitung

MG 10JRE Bedienungsanleitung

Burkert

Burkert 8177 Bedienungsanleitung

Firetide

Firetide HotPort 3203 Handbuch

Tele Radio

Tele Radio T9-02 Bedienungsanleitung

Rotronic

Rotronic HygroFlex HF3 Series Bedienungsanleitung

Jamara

Jamara FCX6 Pro Tel Bedienungsanleitung