B+K precision 4045B Bedienungsanleitung

Model: 4045B

Arbitrary Function

Generator

USER MANUAL

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Safety Summary

The following safety precautions apply to both operating

and maintenance personnel and must be observed

during all phases of operation, service, and repair of this

instrument. Before applying power, follow the installation

instructions and become familiar with the operating

instructions for this instrument.

If this device is damaged or something is missing,

contact the place of purchase immediately.

This manual contains information and warnings that

must be followed to ensure safe operation as well as

maintain the meter in a safe condition.

GROUND THE INSTRUMENT

To minimize shock hazard, the instrument chassis and

cabinet must be connected to an electrical ground. This

instrument is grounded through the ground conductor of

the supplied, three-conductor ac power cable. The

power cable must be plugged into an approved three-

conductor electrical outlet. Do not alter the ground

connection. Without the protective ground connection,

all accessible conductive parts (including control knobs)

can render an electric shock. The power jack and

mating plug of the power cable must meet IEC safety

standards.

DO NOT OPERATE IN AN EXPLOSIVE

ATMOSPHERE

Do not operate the instrument in the presence of

flammable gases or fumes. Operation of any electrical

instrument in such an environment constitutes a definite

safety hazard.

KEEP AWAY FROM LIVE CIRCUITS

Instrument covers must not be removed by operating

personnel. Component replacement and internal

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

adjustments must be made by qualified maintenance

personnel. Disconnect the power cord before removing

the instrument covers and replacing components.

Under certain conditions, even with the power cable

removed, dangerous voltages may exist. To avoid

injuries, always disconnect power and discharge circuits

before touching them.

DO NOT SERVICE OR ADJUST ALONE

Do not attempt any internal service or adjustment unless

another person, capable of rendering first aid and

resuscitation, is present.

DO NOT SUBSTITUTE PARTS OR MODIFY THE

INSTRUMENT

Do not install substitute parts or perform any

unauthorized modifications to this instrument. Return

the instrument to B&K Precision for service and repair to

ensure that safety features are maintained.

WARNINGS AND CAUTIONS

WARNING and CAUTION statements, such as the

following examples, denote a hazard and appear

throughout this manual. Follow all instructions

contained in these statements.

A WARNING statement calls attention to an operating

procedure, practice, or condition, which, if not followed

correctly, could result in injury or death to personnel.

A CAUTION statement calls attention to an operating

procedure, practice, or condition, which, if not followed

correctly, could result in damage to or destruction of part

or all of the product.

WARNING:

Do not alter the ground connection. Without the

protective

ground connection, all accessible

conductive parts (including control knobs) can

render an electric shock. The power jack and mating

plug of the power cable meet IEC safety standards.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

WARNING:

To avoid electrical shock hazard, disconnect power

cord before removing covers. Refer servicing to

qualified personnel.

CAUTION:

Before connecting the line cord to the AC mains,

check the rear panel AC line voltage indicator.

Applying a line voltage other than the indicated

voltage can destroy the AC line fuses. For continued

fire protection, replace fuses only with those of the

specified voltage and current ratings.

CAUTION:

This product uses components which can be

damaged by electro

static discharge (ESD). To avoid

damage, be sure to follow proper procedures for

handling, storing and transporting parts and

subassemblies which contain ESD

sensitive

components.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Compliance Statements

Disposal of Old Electrical & Electronic Equipment

(Applicable in the European

Union and other European countries with

separate collection systems)

This product is subject to

Directive 2002/96/EC of the

European

Parliament and the Council

of the European Union on

waste

electrical and electronic

equipment (WEEE) , and in

jurisdictions

adopting that Directive, is

marked as being put on the

market after August 13,

2005, and should not be

disposed of as unsorted

municipal waste. Please

utilize your local WEEE

collection

facilities in the disposition

of this product and

otherwise observe all

applicable requirements.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Safety Symbols

Refer to the user manual for warning

information to avoid hazard or personal

injury and prevent damage to instrument.

Chassis (earth ground) symbol.

On (Power). This is the In position of the

power switch when instrument is ON.

Off (Power). This is the Out position of

the power switch when instrument is OFF.

On (Supply). This is the AC mains

connect/disconnect switch at the back of

the instrument.

Off (Supply). This is the AC mains

connect/disconnect switch at the back of

the instrument.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

CE Declaration of Conformity

The model 4045B meets the requirements of

2006/95/EC Low Voltage Directive and 2004/108/EC

Electromagnetic Compatibility Directive with the

following standards.

Low Voltage Directive

-EN61010

Safety requirements for electrical

equipment for measurement, control,

and laboratory use.

EMC Directive

-EN55011

For radiated and conducted emissions.

-EN55082

Electrical discharge immunity

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

1INTRODUCTION.................... 12

1.1 Introduction...........................................12

1.2 Description ...........................................12

1.3 Specifications .......................................13

2INSTALLATION..................... 18

2.1 Introduction...........................................18

2.2 Package Contents ................................18

2.3 Instrument Mounting.............................19

2.4 Power Requirements ............................19

2.5 Fuse Replacement................................20

2.6 Grounding Requirements......................20

2.7 Signal Connections...............................21

3OPERATING INSTRUCTIONS

3.1 General Description ..............................22

3.2 Display Window ....................................24

3.3 Front Panel Controls.............................24

3.4 Connectors ...........................................24

3.5 Output Connections..............................25

3.6 MENU Keys ..........................................27

3.6.1 WAVEFORM Keys .......................27

3.6.2 MODE Key....................................29

3.6.3 UTILITY Key .................................32

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

3.6.4 SWEEP Key ................................. 34

3.6.5 MODULATION Key...................... 36

3.7 ON Key .................................................48

3.8 Cursor Keys..........................................49

3.9 Rotary Input Knob.................................49

3.10 Power-On Settings..............................49

3.11 Memory...............................................50

3.12 Displaying Errors ................................51

3.13 Quick Start..........................................52

3.13.1 Selecting a Standard Waveform

................................................................ 52

3.13.2 Setting the Output ................... 52

3.13.3 Using Voltage Offset ............... 53

3.13.4 Storing and Recalling a

Waveform Generator Setup .................. 53

4PROGRAMMING ................... 60

4.1 Overview..............................................60

4.1.1 Connecting to USB (Virtual COM)

Interface.................................................. 60

4.1.2 USB (Virtual COM) Settings ....... 66

4.2 Device States.......................................67

4.2.1 Local State (LOCS) ..................... 67

4.2.2 Remote State (REMS) ................. 67

4.3 Message Exchange Protocol ...............67

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com

Inhaltsverzeichnis

Andere B+K precision Messgerät Handbücher

B+K precision

B+K precision 879B Bedienungsanleitung

B+K precision

B+K precision PR65 Series Bedienungsanleitung

B+K precision

B+K precision 308A Bedienungsanleitung

B+K precision

B+K precision 5335B Bedienungsanleitung

B+K precision

B+K precision SEFRAM 7861 Bedienungsanleitung

B+K precision

B+K precision 1535A Bedienungsanleitung

B+K precision

B+K precision 177/V-95 Bedienungsanleitung

B+K precision

B+K precision 313C Bedienungsanleitung

B+K precision

B+K precision 302 Bedienungsanleitung

B+K precision

B+K precision 600 Bedienungsanleitung

B+K precision

B+K precision 601B Bedienungsanleitung

B+K precision

B+K precision 2650 Bedienungsanleitung

B+K precision

B+K precision 603B Bedienungsanleitung

B+K precision

B+K precision 885 Bedienungsanleitung

B+K precision

B+K precision 880 Bedienungsanleitung

B+K precision

B+K precision 240A Bedienungsanleitung

B+K precision

B+K precision PR-55 Bedienungsanleitung

B+K precision

B+K precision 601B Bedienungsanleitung

B+K precision

B+K precision 2708B Bedienungsanleitung

B+K precision

B+K precision 600B Bedienungsanleitung

B+K precision

B+K precision 310 Bedienungsanleitung

B+K precision

B+K precision 830C Bedienungsanleitung

B+K precision

B+K precision DAS240-BAT Bedienungsanleitung

B+K precision

B+K precision RFM3000 Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung