Bradley Verge LVGD Series Bedienungsanleitung

Installation

P.O. Box 309

Menomonee Falls, WI 53052 USA

800 BRADLEY (800 272 3539)

+1 262 251 6000

bradleycorp.com

215-1672 Rev. J; ECN 16-08-008

Page 1 of 12 6/2/2016

LVGD3

Verge®Lavatory System – LVGD-Series

with Evero®Natural Quartz Material

Table of Contents

Components................................2–3

Supplies Required .............................4

Dimensions ................................4–5

Rough-Ins ...................................6

Frame Mounting...............................7

Faucet Box Mounting ...........................7

Drain Assembly ...............................8

Faucets and Optional Soap Valve .................8

Bowl Mounting ................................9

Strainer and P-trap............................10

Adjust the Temperature ........................10

Trap Cover ..................................11

Cleaning and Maintenance .....................12

WARNING

Turn OFF electrical power to the electrical outlets, then unplug all electrical units prior to installation.

Electrical power MUST remain off until installation is complete.

Installer’s hardware must be appropriate for wall construction. Wall anchors must have a minimum pull-out

rating of 1,000 lbs.

NOTICE

Make sure that all water supply lines have been flushed and then completely turned off before beginning

installation. Debris in supply lines can cause valves to malfunction.

IMPORTANT

Read this entire installation manual to ensure proper installation. When finished with the installation, file

this manual with the owner or maintenance department. Compliance and conformity to local codes and

ordinances is the responsibility of the installer. Product warranties may be found under “Products” on our

Web site at bradleycorp.com.

Separate parts from packaging and make sure all parts are accounted for before discarding any packaging

material. If any parts are missing, do not begin installation until you obtain the missing parts.

For standard height mounting, do not exceed the recommended 34" distance from the top of the lav deck

to the finished floor. To meet ADA requirements, the lav deck cannot exceed the 34" maximum height

dimension.

LVGD3 Installation

26/2/2016 Bradley • 215-1672 Rev. J; ECN 16-08-008

Components

Chrome P-trap (S29-094)

Plastic P-trap (269-1697)

Frame

(S17-363)

Access Panel

(186-1816)

Bowl

Contact your Bradley Representative for color options

Complete Hardware Prepack (S45-2473)

Frame Mounting Qty.

Washer, Square 9

Washer, Flat 1" O.D. 2

Bowl-To-Frame (S45-2481) Qty.

Screw, ¼-20 x ½" 3

Washer, Flat ⁵⁄₈" O.D. 3

Trap Cover (S45-2482) Qty.

Screw, 10-24 x ½" 6

#10 Finishing Washer 6

Trap Hook Bracket 1

Screw, 10-24 x 3⁄8" 1

Washer, Flat 35⁄64" O.D. 1

Complete Drain Prepack

(S45-2471)

Strainer and

Screw

(S45-2479)

O-Ring

(125-111)

Drain

Adapter

Packing

Washer

#10-24

Screw

Drain Adapter

Prepack

(S45-2480)

Water supply to battery box solenoid MUST be supplied

using a plastic hose (provided by Bradley).

TMV Valve

(½" NPTM Outlet)

(S45-2478)

Hose Prepack

(S45-2730)

Supply Fittings

(S45-2512)

Supply Fittings

(S45-2513)

Hose Prepack

(S45-2731)

TMV Supply

Connections

Tempered Supply

Connections

Plastic

Hose

Plastic

Hose

Stainless

Steel

Hose

Plastic

Hose

Plastic Hose Stainless

Steel

Hose

Plastic

Hose

Plastic

Hose

Installation LVGD3

Bradley • 215-1672 Rev. J; ECN 16-08-008 6/2/2016 3

Components

IR-DCD Faucet*

(S53-336)

CAP-DCA Faucet

(S53-334)

Battery Box Prepack

(S45-2508)

(includes bracket and

mounting hardware)

Battery Box for

CAP-DCA Faucets

6315-KT0000 Soap Dispenser 6324-68 Soap Dispenser 6334 Soap Dispenser

Optional

Transformer

Plug-In Transformer

Option (PT) for

IR-DCD Faucet

(S53-337)

Plug-in transformer option (PT)

includes Transformer (S53-338),

Adapter (S53-339), and Grounding

Kit (S53-349) for CAP-DCA Faucets

IR-DCG Faucet*

(S53-350)

Plug-In Transformer

Option (PT) for

IR-DCG Faucet

(153-486)

*Adapter S45-2872 included with faucet *Adapter S45-2872 included with faucet

LVGD3 Installation

46/2/2016 Bradley • 215-1672 Rev. J; ECN 16-08-008

Dimensions

Top View

Front View

Supplies Required:

• (11)

3⁄8" lag screws, wall anchors, bolts (minimum pull-out rating of 1,000 lbs.)

• ½" hot/cold or tempered supply piping

• 1½" NPT drain piping

• OPTIONAL: (2) 110 volt GFCI protected electrical outlets for 100–120 VAC plug-in transformers (for Bradley

Faucets)

• Screen filter(s) as needed, if not included with faucet(s)

30"

(762mm)

90" (2286mm)

Top of Deck at Front

30"

(762mm)

66"

(1676mm)

90-7/8" (2308mm)

Bottom of Deck at Front

90-1/2" (2299mm)

Bottom of Deck at Back Wall

89-7/8" (2283mm)

Top of Deck at Back Wall

Installation LVGD3

Bradley • 215-1672 Rev. J; ECN 16-08-008 6/2/2016 5

Dimensions – Side View

33½"

(851mm)

8½"

(216mm)

22½"

(572mm)

15¾"

(400mm)

Standard

Height

Juvenile

Height

TAS, Grades 6

through 8 or 9

TAS, Pre-K

through Grades

5 or 6

301⁄8"

(765mm)

221⁄8"

(562mm)

363⁄8"

(924mm)

14"

(356mm)

30½"

(775mm) 8½"

(216mm)

22½"

(572mm)

15¾"

(400mm)

191⁄8"

(486mm)

333⁄8"

(848mm)

14"

(356mm)

29½"

(749mm) 8½"

(216mm)

22½"

(572mm)

15¾"

(400mm)

261⁄8"

(664mm) 181⁄8"

(460mm)

323⁄8"

(822mm)

14"

(356mm)

271⁄8"

(689mm)

31½"

(800mm) 8½"

(216mm)

22½"

(572mm)

15¾"

(400mm)

281⁄8"

(714mm) 201⁄8"

(511mm)

343⁄8"

(873mm)

14"

(356mm)

LVGD3 Installation

66/2/2016 Bradley • 215-1672 Rev. J; ECN 16-08-008

RIM HEIGHT VERTICAL HEIGHT ADJUSTMENTS FOR CODES A–E and H FIXTURE STYLE

33½" None Standard Height

31½" Subtract 2" TAS, Grades 6 through 8 or 9

29½" Subtract 4" TAS, Pre-K through Grades 5 or 6

30½" Subtract 3" Juvenile Height

Rough-Ins

45" (1143mm) Ref. Dim.

to outside corner of bowl

(mark corner of bowl)

33½"

(851mm)

Ref.

26½"

(673mm)

427⁄8"

(1089mm)

21"

(533mm)

243⁄8"

(619mm)

27"

(686mm)

427⁄8"

(1089mm)

27"

(686mm)

21"

(533mm)

295⁄8"

(752mm)

GFCI Box

4" (102mm)

3" (76mm)

30¼"

(768mm)

343⁄8"

(873mm)

363⁄8"

(924mm)

Ref.

33¾"

(857mm)

27¼"

(692mm)

24"

(610mm)

10¾" (273mm) 21"

(533mm)

22¼"

(565mm)

Reinforce wall at points A and B.

Standard rough-in shown.

45½" (1156mm) Ref. Dim.

to outside bottom corner of bowl

CODE DESCRIPTION QTY.

3⁄8

" Lav Deck Bowl Anchors with a Minimum Pull-Out Force of 1,000 lbs. (reinforce walls at anchor points) 2

3⁄8

" Lav Deck Frame Anchors with a Minimum Pull-Out Force of 1,000 lbs. (reinforce walls at anchor points) 9

H, C ½" Hot/Cold Supplies, Stub-Out 2" From Wall 1

D110v GFI Protected Electrical Outlet (AC version only)

Three single outlets are required for CAP-DCG or CAP-DCA faucets due to the size of the transformers. 3

E1½" NPT Drain, Stub-Out 2" from Wall 1

7½"

(191mm)

Installation LVGD3

Bradley • 215-1672 Rev. J; ECN 16-08-008 6/2/2016 7

1Frame Mounting

Typical installation is shown. It may be necessary to repair the wall

after mounting. The ﬁxture may not cover all of the wall modiﬁcations.

16"

(406mm)

centers

14"

(356mm)

Floor

Drywall

Drain, supplies and electrical box are

shown in their approximate locations.

Cut clearance holes in the plywood as

required.

NOTE: Plywood should equal the

thickness of the drywall (½" minimum).

Fasten plywood securely

to at least (4) studs.

Use 3⁄8" lag screws and square washers provided to secure

the frame to plywood (9) places. Shim frame as necessary.

NOTE: Other fasteners may be used based on wall material.

Shim the frame at anchor points to

ensure the offset bracket is straight.

Leave the top three screws loose.

Minimum required to

pick up four studs and

vertical frame members

–56" (1422mm) min.

56"

(1422mm)

Plywood Mounting Height "A" Dimension

Standard Height 207⁄8" (530mm)

TAS, Grades 6 through 8 or 9

187⁄8" (479mm)

TAS, Pre-K through Grades 5 or 6

167⁄8" (429mm)

Juvenile Height 177⁄8" (454mm)

2Faucet Box Mounting

Hang the faucet box brackets onto the frame

in the orientation shown. Piping connection of

box should point toward the back of the unit.

Mount the faucet boxes

onto the brackets with

valve positioned toward

the wall (if applicable).

LVGD3 Installation

86/2/2016 Bradley • 215-1672 Rev. J; ECN 16-08-008

4Faucets and Optional Soap Valve

For ease of installation, leave the bowl laying on

its back. Install the faucets and optional soap

valves according to manufacturer's instructions.

Bradley Model 6315 Soap Dispenser is shown.

3Drain Assembly

For ease of drain installation, lay the

bowl on its back.

O-Ring

Drain Adapter

Packing Washer

#10-24

Screw

Installation LVGD3

Bradley • 215-1672 Rev. J; ECN 16-08-008 6/2/2016 9

5a Bowl Mounting (to Frame)

Washer

¼"-20

Screw

5b Bowl Mounting (to Wall)

Reinforce behind the wall

at the two bowl mounting

locations, then secure the

bowl to the wall.

Press firmly on the back

of the bowl to seat the

bowl into the frame.

Tighten the top three

screws on the frame.

Bowl is heavy!

Water supply to battery box solenoid MUST be supplied

using a plastic hose (provided by Bradley).

Cold

Hot

Optional TMV Valve

(½" NPTM Outlet)

Connect faucet hoses. Slide

through keyhole slots from behind.

Optional

Tempered

Supply

TMA Option

NONE Option

Plastic

Hose

Plastic

Hose

Stainless

Steel

Hose

Stainless Steel Hose

Plastic

Hose Plastic

Hose

LVGD3 Installation

10 6/2/2016 Bradley • 215-1672 Rev. J; ECN 16-08-008

Strainer

6Strainer and P-trap

Attach the strainer

screw to the strainer.

Do not overtighten.

Thread the strainer screw

through the boss on the

drain adapter and secure

the strainer to the bowl.

7Adjust Temperature with Water Running

ALoosen Cap Screw about 1/4" (4-6 turns)

and lift up cover (do not remove).

BUsing cover, turn cartridge gently until

desired water temperature is reached. Do

not turn past stops as this may damage

unit. Push cover down and tighten screw.

This valve is NOT factory preset.

Upon installation, the temperature

of this valve must be checked and

adjusted to ensure delivery of a

safe water temperature. Water

in excess of 110°F (43°C) may

cause scalding.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bradley Sanitärprodukte Handbücher

Bradley

Bradley S19-304GA Bedienungsanleitung

Bradley

Bradley Verge LVQ Series Bedienungsanleitung

Bradley

Bradley S19-315BF Bedienungsanleitung

Bradley

Bradley S19-120SSBF Bedienungsanleitung

Bradley

Bradley Aerada 1000 Series Bedienungsanleitung

Bradley

Bradley 594 Bedienungsanleitung

Bradley

Bradley Verge LVQD1 Bedienungsanleitung

Bradley

Bradley Verge LVQ Series Bedienungsanleitung

Bradley

Bradley S19-310DCFW Bedienungsanleitung

Bradley

Bradley Verge LVGD1 Bedienungsanleitung

Bradley

Bradley Verge LVQ Series Bedienungsanleitung

Bradley

Bradley S19-220DCRPT Bedienungsanleitung

Bradley

Bradley Aerada 900 Series Bedienungsanleitung

Bradley

Bradley Equa-Flo Pressure Balancing Valve Bedienungsanleitung

Bradley

Bradley Express ELX Series Bedienungsanleitung

Bradley

Bradley TouchTime MG Series Bedienungsanleitung

Bradley

Bradley S19-280 Series Bedienungsanleitung

Bradley

Bradley Express ELX Series Bedienungsanleitung

Bradley

Bradley S19-230H Bedienungsanleitung

Bradley

Bradley Express SS Series Bedienungsanleitung

Bradley

Bradley Express SS-3N/TT/STD Bedienungsanleitung

Bradley

Bradley SN2003 Bedienungsanleitung

Bradley

Bradley EXD-2N Bedienungsanleitung

Bradley

Bradley Advocate AV Series Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Bristan

Bristan PS2 BAS C D2 Verdrahtungsschema