Breville TECHnique digital VIN158 Bedienungsanleitung

Please read these instructions before operating the appliance and retain them for

future use.

This product is not suitable for use by children, and may not be suitable for persons

requiring supervision unless they receive instruction by a competent person on how to

safely use the product. Children should be supervised to ensure that they do not play

with the product.

Never use this appliance for anything other than its intended use. This appliance is for

household use only. Do not use this appliance outdoors.

Always ensure that hands are dry before handling the plug or switching on the

appliance.

Never leave the appliance unattended when it is connected to the mains supply.

Ensure the appliance is switched off and unplugged from the supply socket before

lling or emptying the water tank, after use and before cleaning.

Do not use the appliance if it has been dropped, if there are any visible signs of

damage or if it is leaking.

Always use the appliance on a stable, secure, dry and level surface. When placing the

appliance on its stand, ensure that the surface on which the stand is placed is stable.

Do not touch the metal parts of the appliance during use as they may become very hot.

Never operate the appliance by means of an external timer or separate remote-control

system.

This appliance must not be placed on or near any potentially hot surfaces (such as a

gas or electric hob).

The power cord is not replaceable by the user. Always return the appliance if the power

cord is damaged to avoid any hazard.

Always allow the appliance to cool before cleaning or storing.

Never immerse any part of the appliance or power cord and plug in water or any other

liquid.

Never let the power cord hang over the edge of a worktop, touch hot surfaces or

become knotted, trapped or pinched.

product safety

features

q w e r

asdfg

Water tank inlet cover

Steam control

Shot of steam button

Spray button

Increase temperature button (+)

Decrease temperature button (–)

Flexible cord protector

Heel rest

Due to our policy of continuous improvement, the actual product may differ slightly from the one illustrated in these instructions.

Cord wrap

Cerasol soleplate

Temperature control display

Self clean button

Water level maximum indicator

Water tank

Spray nozzle

10.

11.

12.

13.

14.

15.

before rst use

Remove all packaging including any soleplate protection before heating the

iron.

Wipe over the soleplate with a cloth moistened with methylated spirit. Remove the

methylated spirit with a damp cloth then dry the soleplate thoroughly.

Fill the water tank and then empty it. This will rinse out any foreign particles remaining in

the water tank from the manufacturing process. Never ll your iron directly under a tap.

Always use the measuring cup supplied.

Before connecting your iron to the mains supply, make sure your supply voltage is the

same as the one indicated on your iron.

When you rst use your iron, there may be a slight odour and it may smoke slightly for the

rst few minutes of operation. This is quite normal and will disappear.

lling your iron

Never use fabric conditioner, starches or any other chemicals or additives.

Ensure the iron is switched off and unplugged from the mains supply socket.

Set the steam control to the no steam position ( ).

Place the iron on its heel on a at, stable, dry, heat resistant and level surface and

open the water tank inlet cover.

Using the supplied measuring cup, ll the water tank with ordinary tap water. To avoid

air locks, tilt the iron slightly while lling it.

Don’t ll the iron above the water level indicator MAX marking. Check the water level

by standing the iron on its heel.

When the iron is lled close the water tank inlet cover.

The backlit temperature control display allows you to select from seven fabric types by

using the + or – buttons.

For example, to select the COTTON setting:

Press the increase temperature (+) button until COTTON is selected. The iron will

beep each time the button is pressed.

Your iron will begin to heat up and the temperature indicator icon ( ) will ash.

When your iron beeps once and the temperature indicator icon stops ashing your

iron is at the correct temperature and you can begin ironing.

To decrease the temperature of your iron (e.g from COTTON to SILK, press the

decrease temperature button (-) until SILK is selected.

Note: When the fabric type is changed from a type that requires a high temperature

to one that requires a lower temperature setting (e.g. from COTTON to SILK), the

temperature indicator icon will start to ash. This indicates that your iron is cooling

down to the new setting. To ensure that your iron has cooled to the selected

temperature and is not too hot, wait until your iron beeps once and the temperature

indicator icon stops ashing before ironing.

controls and display

using your iron

We recommend that you:

Start with fabrics that require lower temperatures such as SYNTHETIC, SILK, etc.

Finish ironing with those fabrics which respond best to higher temperatures such as

DENIM, LINEN, etc.

If you iron a fabric made of a blend of bres set your iron for the most delicate bre

e.g. VELVET or SILK.

Never use the burst of steam button on silks or synthetics.

When using starch, it should be sprayed onto the reverse side of the fabric and the

soleplate cleaned more frequently.

Do not iron over sharp or hard objects such as buttons, studs and zippers, as these

will scratch the surface of the soleplate.

•

using your iron

Ironing without steam

If you intend to dry iron fabrics, there is no need to ll the water tank. However, if water is

already in the water tank, you do not need to empty it.

Set the steam control to the no steam position ( ).

Plug your iron into the mains supply and switch on.

Select the desired fabric setting using the temperature increase/decrease buttons

(+ or –).

Your iron will begin to heat up and the temperature indicator icon will ash.

When your iron beeps once and the temperature indicator icon stops ashing your

iron is ready to use.

Steam ironing

During steam ironing, if you do not allow the iron to reach the selected

temperature, water may drip from the soleplate.

It is recommended that for harder to iron fabrics such as cotton and linen, steam should

be used when ironing. Steam should never be used on delicate fabrics like nylons,

acrylics and synthetics.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Select the desired fabric setting using the temperature increase/decrease buttons

(+ or –). For steam ironing, the fabric setting must be either WOOL, COTTON,

DENIM or LINEN. If you select any other fabric type, your iron will not produce

steam.

Note: When the iron is in the steam range, the steam range icon will appear on

the display. There are two steam icons depending on which fabric setting has been

selected. The WOOL and COTTON fabric settings produce less volume of steam

than the DENIM and LINEN settings.

4. Your iron will begin to heat up and the temperature indicator icon will ash.

5. When your iron beeps once and the temperature indicator icon stops ashing your

iron is ready to use.

6. Adjust the steam control for the desired steam output.

7. Move the steam control lever towards the maximum steam position ( ) to increase

the amount of steam, or towards the no steam position ( ) to decrease the amount

of steam.

8. The iron will automatically begin to steam as soon as the iron is used.

9. The steam can be shut off at any time by setting the steam control to the no steam

position ( ).

Shot of Steam

When using the shot of steam function the fabric setting must be either WOOL, COTTON,

DENIM or LINEN. If you select any other fabric type, your iron will not produce steam.

Wait for several seconds between each press of the steam button.

Press the shot of steam button whenever you have a stubborn crease that needs extra

steam. Steam will burst from the holes in the soleplate into the fabric.

Vertical Steam Ironing

Never iron garments when they are being worn.

Your iron can be used for vertical steam ironing. This process can be applied to curtains,

dresses on hangers etc.

1. Fill your iron with water.

2. Plug your iron into the mains supply and switch on.

3. Select the desired fabric setting using the temperature increase/decrease buttons

(+ or –). For steam ironing, the fabric setting must be either WOOL, COTTON,

DENIM or LINEN. If you select any other fabric type, your iron will not produce

steam.

Note: When the iron is in the steam range, the steam range icon will appear on

the display. There are two steam icons depending on which fabric setting has been

selected. The WOOL and COTTON fabric settings produce less volume of steam

than the DENIM and LINEN settings.

4. Your iron will begin to heat up and the temperature indicator icon will ash. When

your iron beeps once and the temperature indicator icon stops ashing your iron is

ready to use.

5. Hold the iron 15cm (6 inches) from the fabric.

6. Press the shot of steam button. The steam will penetrate the fabric removing the

creases. To apply more steam press the shot of steam button again.

Precondition Steam

Keep children away from the front of the iron and do not hold your ngers in

front of the soleplate when using the precondition steam feature.

For difcult areas (e.g. collars, cuffs, pockets, etc.) press the shot of steam button. The

special steam channels in the soleplate deliver more steam around the front part of the

iron preconditioning the fabric before you iron it for easier and faster ironing.

using your iron

Spraying

The spray function will only operate when there is water in the water tank.

The water spray can be used to help iron heavy fabrics or difcult areas (collars,

pockets, sleeves, creases, etc). It can also be used when ironing delicate fabrics

which cannot be steam ironed.

Simply press the button as required to produce a spray of water. If the spray is being

used for the rst time, or if the iron has been standing for some time, you may need

to press the spray button a few times before it works correctly.

Dry Tank Alert

Your iron will warn you if the water tank requires lling. The dry tank icon ( ) will appear

on the display when the water tank requires lling. Follow the instructions on page 5 to

rell the water tank.

Anti-Drip Function

When the temperature of your iron is insufcient to create steam, the supply of water is

cut off automatically to avoid any drips from the soleplate.

Anti-Scale Filter

Your iron is tted with a permanent anti-scale lter. This lter is xed and cannot be

removed for cleaning.

The lter is designed to reduce the build-up of limescale inside your iron. Limescale

occurs during steam ironing due to water hardness.

Water hardness varies from one area to another. The effectiveness of the lter will

depend on how ‘hard’ your water is.

Safety Auto Shut-off Feature

ALWAYS turn the iron off and disconnect from the power source after use.

NEVER leave the iron unattended with the Auto Shut-off function in operation.

The iron will shut off if it has not been used for 10 minutes when resting on its heel, or

after 30 seconds with the iron resting on its soleplate. The AUTO OFF cursor on the

display will start to ash and your iron will sound a series of beeps. This sequence will be

repeated whilst the iron is in auto shut-off mode. To restart the iron, gently move it until

the AUTO OFF cursor turns off.

Inhaltsverzeichnis

Andere Breville Eisen Handbücher

Breville

Breville Easy Glide Bedienungsanleitung

Breville

Breville VIN359 Bedienungsanleitung

Breville

Breville POWERsteam Advanced Bedienungsanleitung

Breville

Breville Power Steam VIN177 Bedienungsanleitung

Breville

Breville VIN439 Bedienungsanleitung

Breville

Breville Easy Glide VIN290 Bedienungsanleitung

Breville

Breville PressXpress 3100W Bedienungsanleitung

Breville

Breville vin276 Bedienungsanleitung

Breville

Breville power steam advanced 2400w Bedienungsanleitung

Breville

Breville VIN253X Bedienungsanleitung

Breville

Breville VIN210 Bedienungsanleitung

Breville

Breville Power Steam VIN337 Bedienungsanleitung

Breville

Breville VIN439 Bedienungsanleitung

Breville

Breville VIN169 Fehlerbehebungshandbuch

Breville

Breville VIN281 Bedienungsanleitung

Breville

Breville PressXpress VIN410 Series Bedienungsanleitung

Breville

Breville Power Steam VIN247 Bedienungsanleitung

Breville

Breville Technique Bedienungsanleitung

Breville

Breville Power Steam VIN291 Bedienungsanleitung

Breville

Breville VIN067 Bedienungsanleitung

Breville

Breville VIN245 Bedienungsanleitung

Breville

Breville Power Steam VIN358 Bedienungsanleitung

Breville

Breville VIN267 Bedienungsanleitung

Breville

Breville PressXpress soleTEMP VIN411X Bedienungsanleitung

Beliebte Eisen Handbücher anderer Marken

Clatronic

Clatronic DB 3703 Bedienungsanleitung

TEFAL

TEFAL FV4093Z0 Bedienungsanleitung

Gorenje

Gorenje SIH 2200 BS Bedienungsanleitung

Bosch

Bosch 2 Series Bedienungsanleitung

Riffel

Riffel Catena KB-819 Bedienungsanleitung

Texi

Texi Hestia Bedienungsanleitung

Maxwell

Maxwell MW-3010 Bedienungsanleitung

TREVIDEA

TREVIDEA Girmi ST60 Bedienungsanleitung

Primula

Primula Vapormat Bedienungsanleitung

Magio

Magio MG-541 Bedienungsanleitung

Bosch

Bosch Sensixx B22L Bedienungsanleitung

Philips

Philips GC651 Bedienungsanleitung

Vitek

Vitek VT-1247 VT Bedienungsanleitung

Cleanmaxx

Cleanmaxx 3397 Bedienungsanleitung

Philips

Philips GC800 Bedienungsanleitung

dyras

dyras ESI-2400AC Bedienungsanleitung

Philips

Philips PerfectCare PSG71 Series Bedienungsanleitung

GE 169061 Bedienungsanleitung