Bristan DSC 3HBF C Bedienungsanleitung

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Installation Instructions

Descent Tap Range

Models covered:

DSC 3HBAS C, DSC 3HBF C,

DSC WMBAS C, DSC WMBF C, DSC BS C

www.divapor.com

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert.

We have designed this product with your enjoyment in mind. To ensure that it works

to its full potential, it needs to be ﬁtted correctly. These ﬁtting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to contact us.

Important Safety Information................................................... 3

General Information ................................................................. 4

Speciﬁcations ........................................................................... 4

Dimensions............................................................................... 5-7

Installation Requirements ....................................................... 8

Installation................................................................................ 9-11

3 Hole Basin Mixer / Bath Filler............................................... 9

Wall Mounted Basin Mixer / Bath Filler .................................. 10

Bath Spout ................................................................................ 11

Maintenance ............................................................................. 12

Troubleshooting........................................................................ 13

Guarantee ................................................................................. 14-15

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Important Safety Information

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are

installed, used correctly and receive regular maintenance in accordance with these

instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualiﬁed plumber.

•This product needs to be installed in accordance with, and meet the requirements of

the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

•Remove all packaging and check the ﬁtting for damage before starting installation.

•Warning: Before starting any installation please consider the following: before

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: - Wear eye protection

- Unplug equipment after use

•Important: Remember to turn off the mains water supply before connecting to any

existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease

of maintenance.

•Warning: Before installing this product it is essential that you thoroughly ﬂush

through the pipework in order to remove any remaining swarf, solder, etc.

Failure to carry out this procedure could cause problems or damage to the workings of

the tap.

•Take care when handling the ‘ﬂexible connecting pipes’, do not bend, twist or crush

them. Only tighten the pipes by hand.

• This product must not be modiﬁed in any way as this will invalidate the guarantee.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

General Information

This product has been tested to the Water Regulations Advisory Scheme (WRAS) and

satisﬁes the requirements of the Water Supply (Water Fittings) Regulations 1999 and

current bylaws. For full Installation Requirements & Notes (IRN) please visit

www.wras.co.uk/directory.

Designed to comply with BS EN 200 for combination taps to be used within systems

designed to BS 6700.

BS 6700 recommends the temperature of stored water should never exceed 65°C.

A stored water temperature of 60°C is considered sufﬁcient to meet all normal

requirements and will minimise the build up of lime scale in hard water areas.

If installing this product on a low pressure (tank fed) system please see speciﬁcation

table below to determine the minimum distance required from undeside of the cold

water tank to the outlet.

These taps and mixers should be installed in compliance with the Water Regulations.

Where the supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the

mains, approved check valves must be ﬁtted in the supply pipes.

For further details contact your Local Water Authority.

Speciﬁcations

Product Code

Working pressure

Inlet

Minimum

distance from cold

water tank to outlet

(metres)

Min Max

DSC 3HBAS C 0.2 5.0 15mm Compression Threaded Tail 2

DSC 3HBF C 0.4 5.0 3/4" BSP Threaded Tail 4

DSC WMBAS C 0.2 5.0 15mm Compression Threaded Tail 2

DSC WMBF C 0.5 5.0 22mm Compression Threaded Tail 5

DSC BS C 0.2 5.0 1/2" BSP Threaded Tail 2

Maximum static pressure- 10.0 bar

System Requirements:

Gravity fed hot & cold (Equal pressures)

Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)

Unvented systems

Instantaneous water heater (Combination boiler)

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dimensions

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

110

105

110

107

3 Hole Basin Mixer

3 Hole Bath Filler

www.divapor.com

Dimensions Cont.

Wall Mounted Basin Mixer

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Bath Spout

182

48-62 195

200

www.divapor.com

Dimensions Cont.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Dimensions are approximate and in millimetres.

Wall Mounted Bath Filler

58-70

182

200

www.divapor.com

Installation Requirements

Flexible Connecting Pipes

Care must be taken when connecting the ﬂexible connection pipes to the household pipework to

ensure they do not bend sharply and kink or twist.

See below for recommended ways to ﬁt the ﬂexible connecting pipes.

Slight

bend

90°

Angle

Kink Curved

round

Twists

Important: Failure to follow these guidelines may result in poor performance and damage

to the ﬂexible connecting pipes.

Important: Full access must be made available on installation for future maintenance/

servicing purposes.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

9Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Installation

1. With the backnut, metal and rubber washer

ﬁtted to the side body threaded tail, put the side

body through the hole in the basin / bath from

underneath.

2. Screw the shroud, ensuring the washer is

ﬁtted betweed the shroud and basin / bath, onto

the treaded tail and tighten backnut

underneath onto the bottom of the basin/

bath. The screws on the backnut allow for any

uneven surfaces and should be tightened up to

metal washer. Replace the handle, grub screw

and the cap.

3. Fit the spout to the basin/ bath tightening the

backnut. The screws on the backnut allow for

any uneven surfaces and should be tightened

up to metal washer.

4. Attach the T- joint assembly and connect to

the side bodies (hot on the left, cold on the right

when viewed from the front), by using the ﬂexi

tails supplied.

5. Connect the hot and cold water supplies

to the side bodies (hot to the left, cold on the

right hand side), fully open both valves, letting

the water ﬂow for a few minutes to ﬂush the

system.

6. Fit the clicker waste (basin mixer only)

ensuring the rubber washer is ﬁtted between

the basin and the waste. Place the other

rubber washer under the basin and secure in

place by tightening the backnut. In order to

ﬁll the basin, the button in the middle of the

waste needs to be pressed down.

To release the water, press the button again.

7. Check all joints and connections

for leaks.

3 Hole Basin Mixer/ Bath Filler

www.divapor.com

Installation Cont.

Wall Mounted Basin Mixer and Bath Filler

1. Decide on the ﬁnal position of the basin mixer/

bath ﬁller. Install suitable battons into the wall

cavity if required to support the tap body.

2. Plumb the hot and cold water supply pipes to

the required position.

3. Secure mixer body using the screws and wall

plugs supplied.

4. Attach the supply pipework to the hot and cold

inlets (hot on the left and cold on the right when

viewed from the front) ensuring the olive is ﬁtted

to the copper pipe work. Tighten the compression

nut to secure the pipework and create a water

tight seal.

Note: Before ﬁnishing the wall surface turn on

both water supplies to check for any leaking

connections.

5. Finish the wall surface.

Note, it is important that a sufﬁcient amount of

the spout connecting tube and valves are left

exposed to allow the spout and valve shrouds to

ﬁt.

6. Fit the spout and tighten the grub screws to

secure in position.

7. Screw the valve shrouds onto the valves using

the screws supplied. Push the plinth over the

shroud.

8. Fit the spline adaptors to the valve splines

using the screws and washers supplied.

9. Push the handles onto the valve shrouds and

tighten the grub screws.

10. Turn on both water supplies and operate the

handle letting the water ﬂow for a few minutes to

ﬂush the system.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan VR1000 Bedienungsanleitung

Bristan

Bristan QST BSM C (D5) Verdrahtungsschema

Bristan

Bristan ALP Series Verdrahtungsschema

Bristan

Bristan NIVA NVA BSM C Verdrahtungsschema

Bristan

Bristan R2 SHXRR C Montageanleitung

Bristan

Bristan SOLO SST1000-L Bedienungsanleitung

Bristan

Bristan DUL3 THBSM C Bedienungsanleitung

Bristan

Bristan Z 1/2 C Bedienungsanleitung

Bristan

Bristan Regency R BSM C Bedienungsanleitung

Bristan

Bristan TG SNK C Verdrahtungsschema

Bristan

Bristan VR1000 Bedienungsanleitung

Bristan

Bristan OR2 SHXSM C Montageanleitung

Bristan

Bristan Pivot Series Bedienungsanleitung

Bristan

Bristan VAX DSM C Verdrahtungsschema

Bristan

Bristan Artisan Bedienungsanleitung

Bristan

Bristan VAL2 BIB C 6 CD Verdrahtungsschema

Bristan

Bristan GLL RAPSNK4 C Bedienungsanleitung

Bristan

Bristan GLL FLEXSNK C (D1) Verdrahtungsschema

Bristan

Bristan Pisa series Verdrahtungsschema

Bristan

Bristan W BASIN06 C Bedienungsanleitung

Bristan

Bristan FIXED HEADS FHC ABRD01 C Bedienungsanleitung

Bristan

Bristan Z2 DUS 1/2 C Verdrahtungsschema

Bristan

Bristan SMILE SM 1/2 C D6 Verdrahtungsschema

Bristan

Bristan PM2 SHCDIV C Verdrahtungsschema

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung