Bristan R2 SHXRR C Montageanleitung

Installation Instructions

and User Guide

Regency Thermostatic Surface

Mounted Shower Valve with

Adjustable or Rigid Riser

Models covered: R2 SHXAR C &

R2 SHXRR C

Please keep this booklet for future

Reference.

Installer, when you have read these

Instructions, please ensure you leave them

with the user.

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert. We have

designed this product with your enjoyment in mind. To ensure that it works to its

full potential, it needs to be fitted correctly. These fitting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to give us a call on 0330 026 6273.

Important Safety Information ………………………………………………………….

General Information ………………………………………………………………………..

Product Features …………………………………………………………………………….

Specifications …………………………………………………...................................

Dimensions ………………………………………………………................................

Pack Contents ………………………………………………………………………………..

Installation Requirements ……………………………………….........................

Flow Regulators ………………………………………………………………………........

Prior to Installation …………………………………………………………………………

Installation ……………………………………………………………………….................

Shower Valve ……………………………………………………………………………….

Adjustable Riser ………………………………………………………………………….

Rigid Riser .………………………………………………………………………………….

Operation ……………..........………………………………………………………………….

Commissioning ……………………………....………………………………………………

Maintenance …………………………….....………………………………………………….

In-Service Testing ……………………………………………………………………………

Troubleshooting ……………………………………........………………………………….

Guarantee ……………………………………............……………………………………….

Notes ……………………………………………..............…………………………………….

8-9

10-13

14-15

17-22

17-18

19-20

21-22

25-26

27-28

29-30

32-33

2Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are installed,

used correctly and receive regular maintenance in accordance with these instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualified plumber.

•Do not use if the showerhead or shower hose has been damaged or is blocked.

•Do not crush or kink the shower hose, this could damage the hose and cause leaks.

•Remove all packaging and check the components for damage before starting

installation.

•Warning: Before starting any installation please consider the following: Prior to

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: -Wear eye protection

-Unplug equipment after use

•The fitting of isolating valves is required as close as is practical to the supply inlet

feeds of the thermostatic mixing valve.

•Warning: Before installing the new shower valve it is essential that you

thoroughly flush through the pipework in order to remove any remaining swarf, solder,

etc. Failure to carry out this procedure could cause problems or damage to the

workings of the shower valve.

•This product must not be modified in any way as this will invalidate the guarantee.

Important Safety Information

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

General Information

4Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

This product has been tested to the TMV2 scheme which complies with the BS EN

1287:1999 (LP) and BS 1111:1999 (HP) thermostatic mixing valve standards. It also

satisfies the requirements of the water supply (water fittings) regulations 1999 and

current bylaws.

BS 6700 recommends the temperature of stored water should never exceed 65°C. A

stored water temperature of 60°C is considered sufficient to meet all normal

requirements and will minimise the build up of lime scale in hard water areas.

Important: Nominally equal (balanced) inlet supply pressures are recommended for

optimum performance with mixer showers.

This shower valve should be installed in compliance with the Water Regulations.

If in doubt, contact a registered plumber or your Local Water Authority or the

Secretary of The Institute of Plumbing, address as follows;-

The Institute of Plumbing,

64 Station Lane,

Hornchurch,

Essex, RM12 6NB

Tel:01708 472791

Guide to designations

HP High Pressure

LP Low Pressure

S Shower

Product Features

1. On/Off Control

Turn the control anti-clockwise

to turn the shower on and increase

the flow of water.

Turn the control clockwise to

Decrease the flow of water and

Turn the shower off.

2. Temperature Control

Turn the control anti-clockwise to

increase the temperature.

Turn the control clockwise to

Decrease the temperature.

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Specifications

Inlet Connections: 15mm compression, with adjustable centres.

Operating Pressure Range: Min: 0.1 bar –Max: 5.0 bar –Maximum recommended

imbalance between hot and cold supply should not exceed a ratio of 5:1.

Maximum Static Pressure: 10.0 bar

Maximum Outlet Temperature: Factory pre-set to 41ºC (can be re-set to suit site

conditions).

Supply Requirements:

Minimum cold water supply temperature: 5ºC.

Maximum cold water supply temperature: 25ºC.

Maximum hot water supply temperature: 80ºC.

(a maximum hot water supply temperature of 60 –65ºC is recommended for ablutionary

purposes).

Note: The inlet hot water temperature must be at least 10ºC above the required blend

temperature (e.g. shower temperature 43ºC: minimum hot supply 53ºC.

6Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dimensions (mm’s)

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

975

345

110-155

127

800

114

510

600

150

127

Pack Contents –R2 SHXAR C

1Shower Valve

2Covers x2

3Filters x2 (pre-fitted)

4Green flow regulator (Pre-fitted)

5Yellow flow regulator (Pre-fitted)

6Backplate fixings x2

7Riser rail fixings x2

8Showerhead (single function)

9Sealing washers x2

10 Shower hose

11 Riser rail

8Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Pack Contents –R2 SHXRR C

1Shower Valve

2Covers x2

3Filters x2 (Pre-fitted)

4Green flow regulator (Pre-fitted)

5Yellow flow regulator (Pre-fitted)

6Backplate fixings x2

7Shower rose

8Shower arm

9Shower arm fixings x2

10 Sealing washer

11 Rose swivel joint

12 Top rail

13 Bottom rail

14 Rail connector

Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Installation Requirements

This shower valve must be installed in

compliance with current water regulations. If

you have any doubts about the water

regulation requirements contact your local

water services provider or use the services of

a professional plumber.

This shower valve is suitable for use with the

following water supply systems.

•Gravity Fed Hot and Cold

(pressure Balanced)

•Gravity Fed Hot and Mains Cold

(differential pressure –see Specification

section on page 6.

•Instantaneous Water Heater

(combination boiler)

•Unvented System

•Pumped System

Gravity Fed Hot and Cold

Important: If you install this shower valve

with a gravity fed system, there must be a

minimum head (vertical distance) from the

underside of the cold water storage tank to

the showerhead position of at least 1 metres.

Note: Pumped system (with Essex flange) If

you install this shower valve to a pumped

gravity fed system where the minimum head

(vertical distance) from the underside of the

cold water storage tank to the top of the hot

water cylinder is less than 1 metre we

recommend an Essex flange is used as shown

on page 11.

Flushing Pipework

Important: Before connecting the shower

valve (see Installation on pages 17-22), supply

pipework must be flushed to clear debris

before connecting the shower valve. Debris

will reduce the performance and life of the

sh ower.

Gravity Fed Hot and Mains Cold

Cold mains supply Cold mains supply

1m min

min

10 Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Java J BID C Bedienungsanleitung

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan RO2 SHXAR C Montageanleitung

Bristan

Bristan Quest Easyfit Verdrahtungsschema

Bristan

Bristan RV SNK C Bedienungsanleitung

Bristan

Bristan SK1850- SK1850-2 Original Betriebsanleitung

Bristan

Bristan DSC SHCDIV C (D7) Verdrahtungsschema

Bristan

Bristan W BASIN12 C Verdrahtungsschema

Bristan

Bristan CRAZE CRZ2 SHXDIVCTFF C Verdrahtungsschema

Bristan

Bristan Star FH STRD01 C Bedienungsanleitung

Bristan

Bristan Options Bath Bedienungsanleitung

Bristan

Bristan JU BAS C Bedienungsanleitung

Bristan

Bristan SQR KIT01 BLK D2 Verdrahtungsschema

Bristan

Bristan K 1/2 C Verdrahtungsschema

Bristan

Bristan Liquorice Kitchen Sink Tap Verdrahtungsschema

Bristan

Bristan Java J BF C Bedienungsanleitung

Bristan

Bristan Blade BL BAS C Bedienungsanleitung

Bristan

Bristan DSC 3HBF C Bedienungsanleitung

Bristan

Bristan Regency R BSM C Bedienungsanleitung

Bristan

Bristan IRBS4-CP Montageanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan PIV BSM C Bedienungsanleitung

Bristan

Bristan Pear Verdrahtungsschema

Bristan

Bristan Jute JU BASNW C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung