Bristan Pivot Series Bedienungsanleitung

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Installation Instructions

Pivot Tap Range

Models covered:

PIV 3HBAS C, PIV 3HBF C,

PIV 5HBSM C

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert.

We have designed this product with your enjoyment in mind. To ensure that it works

to its full potential, it needs to be ﬁtted correctly. These ﬁtting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to contact us.

Important Safety Information................................................... 3

General Information ................................................................. 4

Speciﬁcations ........................................................................... 4

Dimensions............................................................................... 5-6

Installation Requirements ....................................................... 7

Installation................................................................................ 8-11

3 Hole Basin Mixer & Bath Filler ............................................. 8-9

5 Hole Bath Shower Mixer........................................................ 10-11

Maintenance ............................................................................. 12

Troubleshooting........................................................................ 13

Guarantee ................................................................................. 14-15

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Important Safety Information

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are

installed, used correctly and receive regular maintenance in accordance with these

instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualiﬁed plumber.

•This product needs to be installed in accordance with, and meet the requirements of

the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

•Remove all packaging and check the ﬁtting for damage before starting installation.

•Warning: Before starting any installation please consider the following: before

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: - Wear eye protection

- Unplug equipment after use

•Important: Remember to turn off the mains water supply before connecting to any

existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease

of maintenance.

•Warning: Before installing this product it is essential that you thoroughly ﬂush

through the pipework in order to remove any remaining swarf, solder, etc.

Failure to carry out this procedure could cause problems or damage to the workings of

the tap.

•Take care when handling the ‘ﬂexible connecting pipes’, do not bend, twist or crush

them. Only tighten the pipes by hand.

• Do not crush or kin the shower hose, this could damage the hose and cause leaks.

•This product must not be modiﬁed in any way as this will invalidate the guarantee.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

General Information

This product has been tested to the Water Regulations Advisory Scheme (WRAS) and

satisﬁes the requirements of the Water Supply (Water Fittings) Regulations 1999 and

current bylaws. For full Installation Requirements & Notes (IRN) please visit

www.wras.co.uk/directory.

Designed to comply with BS EN 200 for combination taps to be used within systems

designed to BS 8558.

BS 8558 recommends hot water should be stored and distributed at a temperature of

not less than 60°C which will help minimise the buil-up of lime scale in hard water

areas.

If installing this product on a low pressure (tank fed) system please see speciﬁcations

table below to determine the minimum distance required from undeside of the cold

water tank to the outlet.

These taps and mixers should be installed in compliance with the Water Regulations.

Where the supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the

mains, approved check valves must be ﬁtted in the supply pipes.

For further details contact your Local Water Authority.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Speciﬁcations

Product Code

Working pressure

Inlet

Minimum

distance from

cold water tank to

outlet (metres)

Min Max

PIV 3HBF C 0.2 5.0 3/4" BSP Threaded Tail 2

PIV 3HBAS C 0.2 5.0 1/2" BSP Threaded Tail 2

PIV 5HBSM C 0.5 5.0 3/4" BSP Threaded Tail 5

Maximum static pressure- 10.0 bar

System Requirements:

Gravity fed hot & cold (Equal pressures)

Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)

Unvented systems

Instantaneous water heater (Combination boiler)

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Dimensions

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

3 Hole Basin Mixer

3 Hole Bath Filler

100

110

120

105

142

100

Dimensions Cont.

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

5 Hole Bath Shower Mixer

120

104

135

100

Installation Requirements

Flexible Connecting Pipes

Care must be taken when connecting the ﬂexible connection pipes to the household pipework to

ensure they do not bend sharply and kink or twist.

See below for recommended ways to ﬁt the ﬂexible connecting pipes.

Slight

bend

90°

Angle

Kink Curved

round

Twists

Important: Failure to follow these guidelines may result in poor performance and damage

to the ﬂexible connecting pipes.

Important: Full access must be made available on installation for future maintenance/

servicing purposes.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Installation

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

3 Hole Basin Mixer & Bath Filler

1. With the backnut, metal and rubber

washer ﬁtted to the side body threaded

tail, feed the side body through the hole

in the basin/ bath from underneath and

secure in position by screwing the plinth

onto the side body valves, ensuring that

the washers are ﬁtted between the plinths

and the basin/ bath to create a water tight

seal.

2. Secure the side bodies to the basin/

bath by tightening the backnuts and the

washers up to the underneath of the

basin/ bath.

3. Screw the valve shrouds onto the side

body valves.

4. Fit the handles onto the valves and

secure by tightening the grub screws.

Push ﬁt the caps.

5. Remove the washers and the backnut

from the spout threaded tail. Fit the spout

to the basin/ bath ensuring that the

washer is ﬁtted between the spout and

the basin/ bath to create a water tight

seal. Secure the spout to the basin/ bath

using the washers and metal backnut.

Tighten the backnuts onto the threaded

tail. A suitable spanner may be required

to fully tighten the backnut.

6. Connect the hot and cold water

supplies to the side bodies (hot to the left,

cold on the right hand side).

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Installation Cont.

3 Hole Basin Mixer & Bath Filler Cont.

T-joint may vary. For illustration only.

7. Attach the T- joint assembly and

connect to the side bodies (hot on the left,

cold on the right when viewed from the

front), by using the ﬂexi tails supplied.

8. Fit the clicker waste (basin mixer only)

ensuring the rubber washer is ﬁtted

between the basin and the waste. Place the

other rubber washer under the basin and

secure by tightening the backnut, in order

to ﬁll the basin, the button in the middle

of the waste needs to be pressed down. To

release the water, press the

button again.

9. Turn on both water supplies,

operate both handles, letting the water

ﬂow for a few minutes to ﬂush through the

system.

10. Check all joints and connections for any

leaks.

Installation Cont.

1. With the backnut, metal and rubber

washer ﬁtted to the side body threaded

tail, feed the side body through the hole in

the bath from underneath and secure in

position by screwing the plinth onto the

side body valves, ensuring that the

washers are ﬁtted between the plinths

and the bath to create a water tight seal.

2. Secure the side bodies to the bath by

tightening the backnuts and the washers

up to the underneath of the bath.

3. Screw the valve shrouds onto the side

body valves.

4. Fit the handles onto the valves and

secure by tightening the grub screws.

Push ﬁt the caps.

5. Remove the washers and the backnut

from the spout threaded tail. Fit the spout

to the bath ensuring that the washer is

ﬁtted between the spout and the

bath to create a water tight seal. Secure

the spout to the bath using the washers

and metal backnut. Tighten the backnuts

onto the threaded tail. A suitable spanner

may be required to fully tighten

the backnut.

6. Fit the diverter to the bath.

Remove the diverter handle by loosening

the grub screw. With the backnut and

rubber washer ﬁtted to the diverter

threaded tail, push the diverter body up

through the underside of the bath. Screw

the plinth and the shroud onto the

diverter threaded tail. Fit the diverter

handle and tighten the grub screw.

Tighten the backnut underneath to secure

the diverter body in position.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

5 Hole Bath Shower Mixer

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan Z2 SQR 1/2 C Verdrahtungsschema

Bristan

Bristan IRN R001 Bedienungsanleitung

Bristan

Bristan Z2 TBV 1/2 C Verdrahtungsschema

Bristan

Bristan Wine Easyfit Verdrahtungsschema

Bristan

Bristan CLUB VAC PBSM C MT Bedienungsanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan W-BASIN01-C Verdrahtungsschema

Bristan

Bristan CAP2 SHUAR C Montageanleitung

Bristan

Bristan VR1000 Bedienungsanleitung

Bristan

Bristan BUZ2 SHXDIVCTFF C (D4) Verdrahtungsschema

Bristan

Bristan H64WMT2 Montageanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan QD SHXSMFF C D3 Verdrahtungsschema

Bristan

Bristan W BATH12 C Verdrahtungsschema

Bristan

Bristan JAVA J BSM E8 C Bedienungsanleitung

Bristan

Bristan HOU SHC3DIV C Verdrahtungsschema

Bristan

Bristan Artisan AR2 SHXMTFF2 C Montageanleitung

Bristan

Bristan SOQ2 SHUAR C Montageanleitung

Bristan

Bristan SAI 1/2 C Montageanleitung

Bristan

Bristan W BASIN08 C Bedienungsanleitung

Bristan

Bristan BL3105 Montageanleitung

Bristan

Bristan W BASIN15 C Bedienungsanleitung

Bristan

Bristan ARM WORD01 C Bedienungsanleitung

Bristan

Bristan Z2 DUS 1/2 C Verdrahtungsschema

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung