Need help? Give us a call on 0330 026 6273 and speak to one of our trained advisors.
BEAB
(British Electrotechnical Approvals
Board) Approval of Safety.
• Always switch o the power at
the consumer unit and remove the
correct circuit fuse before making
any electrical connections or if you
have to remove the cover of an
installed unit.
• If the shower unit is fitted in a
hard water area, a scale inhibitor
may have to be fitted and the filter
cleaned regularly. For more advise
on obtaining a scale inhibitor, visit
local merchant or DIY store.
• This appliance must be
permanently connected to the
water mains and not connected by
a hose-set.
• Warning:
This appliance is not intended for
use by persons (including children)
with reduced physical, sensory
or mental capabilities, or lack of
experience and knowledge, unless
they have been given supervision
or instruction concerning use of the
appliance by a person responsible
for their safety.
• Children shall not play with the
appliance.
• Cleaning and maintenance shall
not be made by children without
supervision.
• Important: The shower unit must
be switched o at the isolating
switch (pull cord) when not in use.
• Please read these instructions
thoroughly and retain for future use.
• All products manufactured
and supplied by Bristan are safe
provided they are installed, used
correctly and receive regular
maintenance in accordance with
these instructions.
• If you are in any doubt about
your ability to install this product
safely you must employ the
services of an experienced qualified
plumber/electrically qualified
person.
• Warning:
Do not operate the shower unit if
you suspect it is frozen. Do not site
the shower unit where it might be
subjected to freezing conditions.
• Do not install this shower unit in a
room/environment without adequate
ventilation or an extractor fitted. This
is required to prevent condensation
forming within the unit.
• Do not operate the shower unit if
the showerhead or spray hose has
been damaged or is blocked.
• Do not block the flow of water
from the showerhead, by placing it
(smothering it) on your hand or any
other part of your body or foreign
object.
• Do not operate the shower if the
water stops flowing during use or if
the water is leaking from the shower
unit itself.
If this occurs, turn o at the mains
electrical supply and refer to the
Troubleshooting section or contact
Bristan Customer Services.
