Bristan GLR 1/2 C Bedienungsanleitung

Please keep this booklet for future

reference.

Installer, when you have read these

instructions please ensure you leave them

with the user.

Installation Instructions

Glorious Tap Range

Models covered:

GLR 1/2 C, GLR 3/4 C, GLR BAS C,

GLR WMBAS C, GLR WMBF C,

www.divapor.com

Contents

Thank you for choosing Bristan, the UK’s leading taps and showers expert.

We have designed this product with your enjoyment in mind. To ensure that it works

to its full potential, it needs to be ﬁtted correctly. These ﬁtting instructions have been

created to give you all of the information you need and, if you need any further help,

please do not hesitate to contact us.

Important Safety Information................................................... 3

General Information ................................................................. 4

Speciﬁcations ........................................................................... 4

Dimensions............................................................................... 5-7

Installation Requirements ....................................................... 8

Installation................................................................................ 9-11

Basin Mixer............................................................................... 9

Basin & Bath Taps.................................................................... 10

Wall Mounted Basin Mixer / Bath Filler .................................. 11

Maintenance ............................................................................. 12

Troubleshooting........................................................................ 13

Guarantee ................................................................................. 14-15

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Important Safety Information

•Please read these instructions thoroughly and retain for future use.

•All products manufactured and supplied by Bristan are safe provided they are

installed, used correctly and receive regular maintenance in accordance with these

instructions.

•If you are in any doubt about your ability to install this product safely you must

employ the services of an experienced qualiﬁed plumber.

•This product needs to be installed in accordance with, and meet the requirements of

the Water Supply (Water Fittings) Regulations 1999 and Scottish Byelaws 2004.

•Remove all packaging and check the ﬁtting for damage before starting installation.

•Warning: Before starting any installation please consider the following: before

drilling into walls, check that there are no hidden electrical wires, cables or water

supply pipes. This can be checked with the aid of an electronic detector.

•If power tools are used do not forget to: - Wear eye protection

- Unplug equipment after use

•Important: Remember to turn off the mains water supply before connecting to any

existing pipe work. Fitting isolating valves to the inlet feeds is recommended for ease

of maintenance.

•Warning: Before installing this product it is essential that you thoroughly ﬂush

through the pipework in order to remove any remaining swarf, solder, etc.

Failure to carry out this procedure could cause problems or damage to the workings of

the tap.

•Take care when handling the ‘ﬂexible connecting pipes’, do not bend, twist or crush

them. Only tighten the pipes by hand.

• This product must not be modiﬁed in any way as this will invalidate the guarantee.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

General Information

This product has been tested to the Water Regulations Advisory Scheme (WRAS) and

satisﬁes the requirements of the Water Supply (Water Fittings) Regulations 1999 and

current bylaws. For full Installation Requirements & Notes (IRN) please visit

www.wras.co.uk/directory.

Designed to comply with BS EN 200 for combination taps to be used within systems

designed to BS 6700.

BS 6700 recommends the temperature of stored water should never exceed 65°C.

A stored water temperature of 60°C is considered sufﬁcient to meet all normal

requirements and will minimise the build up of lime scale in hard water areas.

If the poduct is installed at low pressure (tank fed), then the minimum distance from

the highest installed position of the outlet to the underside of the cold tank should be at

least 2 metres to ensure adequate performance.

These taps and mixers should be installed in compliance with the Water Regulations.

Where the supplies are unbalanced, i.e. Hot water from cylinder tank / cold from the

mains, approved check valves must be ﬁtted in the supply pipes.

For further details contact your Local Water Authority.

Speciﬁcations

Product Code

Working pressure

Inlet

Min Max

GLR 1/2 C 0.2 5.0 1/2" BSP Threaded Tail

GLR 3/4 C 0.2 5.0 3/4" BSP Threaded Tail

GLR BAS C 0.2 5.0 M10 15mm Compression Flexible Tails

GLR WMBAS C 0.2 5.0 15mm Compression Threaded Tail

GLR WMBF C 0.2 5.0 15mm Compression Threaded Tail

Maximum static pressure- 10.0 bar

System Requirements:

Gravity fed hot & cold (Equal pressures)

Gravity fed hot & cold (Differential pressure, maximum ratio 5:1)

Unvented systems

Instantaneous water heater (Combination boiler)

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dimensions

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

102.7

G 1/2

32.7

111.3

56.4

G 3/4

112.8

32.7

Basin Taps

Bath Taps

www.divapor.com

Dimensions Cont.

Wall Mounted Basin Mixer

Dimensions are approximate and in millimetres.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

470

191.5

G 1/2

144.2

110.1

242.5

79.3

14.5-24.5

20066

G 1/2

240

Basin Mixer

www.divapor.com

Dimensions Cont.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Dimensions are approximate and in millimetres.

202.5

79.3

17.5-27.5

2008

3/4

240

Wall Mounted Bath Filler

www.divapor.com

Installation Requirements

Flexible Connecting Pipes

Care must be taken when connecting the ﬂexible connection pipes to the household pipework to

ensure they do not bend sharply and kink or twist.

See below for recommended ways to ﬁt the ﬂexible connecting pipes.

Slight

bend

90°

Angle

Kink Curved

round

Twists

Important: Failure to follow these guidelines may result in poor performance and damage

to the ﬂexible connecting pipes.

Important: Full access must be made available on installation for future maintenance/

servicing purposes.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Installation

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

Basin Mixer

1. Screw the ﬂexi tails into the bottom of

the body by hand only (DO NOT

OVERTIGHTEN).

2. Feed the ﬂexi tails through the hole in

the basin ensuring the washer is ﬁtted

between the tap body and ﬁxing surface to

ensure a water tight seal.

3. Screw the ﬁxing rod into the bottom

of the mixer body. Slide the 'C' shaped

rubber washer and 'C' shaped metal

washer onto the ﬁxing rod up to the

underside of the basin.

4. To secure the mixer body in place

tighten the ﬁxing nut onto the ﬁxing rod

until they are fully tightened against the

'C' shaped metal washer. The ﬁxing nut

can be tightened with a suitable spanner.

5. Connect the ﬂexi tails to the hot and

cold water supplies.

6. Turn on both water supplies,

operate both handles, letting the water

ﬂow for a few minutes to ﬂush through

the system.

7. Check all joints and connections for any

leaks.

www.divapor.com

Installation Cont.

Basin / Bath Taps

1. Slide the plinths onto the threaded

tails of the taps. Fit the tap

bodies to the basin/ bath ensuring

that the washers are ﬁtted between

the plinths and the basin / bath to

create a water tight seal.

2. Secure the tap bodies to the

basin / bath using the washers and

metal backnuts. Tighten the

backnuts onto the threaded tails. A

suitable spanner may be required to

fully tighten the backnuts.

3. Connect the hot and cold water

supplies to the threaded tails.

4. Turn on both water supplies and

operate the handles, letting the water

ﬂow for a few minutes.

6. Check all joins and connections for

any leaks.

Need help? Give us a call on 0844 701 6273 and speak to one of our trained advisers.

www.divapor.com

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Bristan Sanitärprodukte Handbücher

Bristan

Bristan CRAZE CRZ2 SHXDIVCTFF C Verdrahtungsschema

Bristan

Bristan EV KIT-EFB C Montageanleitung

Bristan

Bristan TRD RISE C Montageanleitung

Bristan

Bristan Pisa series Verdrahtungsschema

Bristan

Bristan Quadrant Riser Rail kit Bedienungsanleitung

Bristan

Bristan R2 SHXRR C Montageanleitung

Bristan

Bristan EXD BAS C Bedienungsanleitung

Bristan

Bristan SOQ2 SHUAR C Montageanleitung

Bristan

Bristan Target TG SNK C Bedienungsanleitung

Bristan

Bristan Jute JU PBSM C Bedienungsanleitung

Bristan

Bristan Quadrato Tap Range Verdrahtungsschema

Bristan

Bristan W BTH PU1 C/G Bedienungsanleitung

Bristan

Bristan Thermostatic Power Shower 1000 Verdrahtungsschema

Bristan

Bristan CART 06732COMPL Original Betriebsanleitung

Bristan

Bristan Cadet Verdrahtungsschema

Bristan

Bristan PIV BAS C Bedienungsanleitung

Bristan

Bristan VAC BAS C MT (D4) Verdrahtungsschema

Bristan

Bristan Java J BID C Bedienungsanleitung

Bristan

Bristan CR SHXDIVFF C Verdrahtungsschema

Bristan

Bristan HOU BSM C Verdrahtungsschema

Bristan

Bristan IRN R001 Bedienungsanleitung

Bristan

Bristan IRBS4-CP Montageanleitung

Bristan

Bristan Prism Bedienungsanleitung

Bristan

Bristan Body Jet JET2 C Bedienungsanleitung

Beliebte Sanitärprodukte Handbücher anderer Marken

Weka

Weka 506.2020.00E Betriebsanleitung

American Standard

American Standard DetectLink 6072121 Bedienungsanleitung

Kohler

Kohler K-6228 Montageanleitung

Uponor

Uponor Contec TS Bedienungsanleitung

Pfister

Pfister Selia 49-SL Bedienungsanleitung

Fortis

Fortis VITRINA 6068700 Bedienungsanleitung

Kohler

Kohler K-12183 Montageanleitung

Maxxus

Maxxus MX-M206-01 Bedienungsanleitung

Viega

Viega Prevista Pure 8512 Bedienungsanleitung

Kohler

Kohler Centerset K-15240 Montageanleitung

Viega

Viega Prevista Dry 8522.33 Bedienungsanleitung

Sanela

Sanela Lema SLP 59RB Bedienungsanleitung

Elkay

Elkay EDF15AC Installationshandbuch

Hans Grohe

Hans Grohe AXOR Citterio E 36702000 Handbuch

baliv

baliv WT-140 Bedienungsanleitung

Kohler

Kohler Mira Eco Bedienungsanleitung

BELLOSTA

BELLOSTA romina 0308/CC Bedienungsanleitung

Crosswater

Crosswater Heir 18-31 Bedienungsanleitung