Buffalo HD-RQSSU2/R5 Bedienungsanleitung

Mac User Guide

HD-RQSSU2/R5 DriveStation

Package contents:

•Main Unit (DriveStation)

•Power Cord

•USB Cable

•eSATA Cable

•eSATA Backplate

•DriveNavigator Installation CD

•User Guides

Back Panel Layout

Note: Changing between RAID modes is done with the RAID Utility, included

with the software on your DriveNavigator CD.

eSATA

Front Panel lock

(Turn counter-clockwise to

release)

Hard Drives

(Squeeze tabs to release)

Hard Drives

(Squeeze tabs to release)

USB in

Power

Cable

Auto On/Off

Manual On/Off

Power

Switch

Flip the power switch on the back of the DriveStation to the OFF position. Plug

DriveStation’s power cord into the power socket as shown, as well as a power

outlet or surge protector. Then, connect a USB or eSATA cable into a matching

port on the back of the DriveStation.

DriveStation Setup

Connect the USB or eSATA cable to your Mac or other device you are adding

the DriveStation to.

Flip the power switch on the back of the DriveStation to the ON (“I”) position.

Your Mac will detect the new drive and place an icon on your desktop.

Your DriveStation is now ready for use! Double-click on the icon to open the hard

drive.

DriveStation Setup

Installing the RAID Utility

By default, your DriveStation is configured in RAID 5 mode. If you’re willing

to trade some performance for better data security, Buffalo Technology

recommends RAID 5 mode, with its excellent balance of security and total

capacity. You may change your RAID configuration with the RAID Utility.

The DriveStation must be connected to your Mac with a USB cable while using

the utility. You may switch to an eSATA connection for normal use after the utility

has run.

The RAID Utility allows you to configure your DriveStation in several modes:

Normal Mode - Appears to your computer as four separate hard drives.

Spanning Mode - Appears to your computer as one large hard drive.

RAID 0 Mode - Appears to your computer as a single drive. Higher performance

than Spanning mode.

RAID 1 Mode - Appears to your computer as a single drive. The third and fourth

drives keep an exact copy of the first and second drives, for redundancy.

RAID 5 Mode - Appears to your computer as a single drive. Approximately 3/4 of

your total space is usable, yet you still have full redundancy.

Changing the mode of the drives in your DriveStation will erase all data on them!

Back up any important data before using the RAID utility.

To install the RAID utility, open the Mac folder on your DriveNavigator CD.

Double-click on RaidSetting.dmg to install the RAID utility.

Using the RAID Utility

Double-click the RaidSetting icon on your desktop.

Once launched, the RAID utility will briefly scan for

your DriveStation. This may take a few seconds.

The initial screen will show your current configuration.

To change the RAID mode, click RAID Settings and choose Change

Disk Structure.

Using the RAID Utility

Select the drive structure that you’d like to use. Click OK, Yes, and Yes.

Understand that this will erase any data on the drive!

After changing the RAID mode, you will need to use the Disk Utility to

format the new partition.

Support Tray Installation

If your equipment rack

supports equipment from the

front only, use the mounting

tray to provide the support your

DriveStation needs. Screw the

tray into into the rack with the

four screws provided and a #2

phillips-head screwdriver.

Slide the DriveStation into the

tray. Secure it with the two

thumbscrews; one on each

side. You may use a ﬂ athead

screwdriver to snug down

the thumbscrews, but do not

overtighten.

Your DriveStation is now secure and stable in

the rack!

FCC Warning

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note on Format

By default, the DriveStation is formatted with FAT32, allowing use with

all modern operating systems. Unfortunately, FAT32 is limited to 4GB

files, making it unsuitable for use with many video editing and backup

software packages. If you plan to use the DriveStation with programs

that generate files larger than 4GB in size, use the Mac Disk Utility to

reformat your drive with a “Mac OS Extended” format.

Technical Specifications

Standard Compliance: USB 2.0; eSATA

Seek Time: Max. 11 milliseconds

Transmission Speed: Max. 1.5 Gbps (eSATA), Max. 480 Mbps (USB 2.0)

Power Consumption: Max. 86W

Power Supply: AC100~240V 50/60Hz

Dimensions: 16.9” x 3.3” x 16.7” (430 x 85 x 423 mm)

Weight: 22.0 lbs. (10.0 kgs)

Operating Environment: 41 - 95° F (5 - 35° C)

20-80% humidity (non-condensing)

PC OS Compatibility: Windows 2000, XP, Vista, Mac OS X

Weight:

22.0 lbs. (10.0 kgs)

Power Supply:

AC100~240V 50/60Hz

Transmission Speed:

Max. 1.5 Gbps (eSATA), Max. 480 Mbps (USB 2.0)

Standard Compliance:

USB 2.0; eSATA

PC OS Compatibility:

Windows 2000, XP, Vista, Mac OS X

Inhaltsverzeichnis

Andere Buffalo Netzwerkspeicherserver Handbücher

Buffalo

Buffalo TeraStation III iSCSI TS-IXL Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS 5000 Bedienungsanleitung

Buffalo

Buffalo LinkStation 200 Series Bedienungsanleitung

Buffalo

Buffalo LS520D Series Bedienungsanleitung

Buffalo

Buffalo LinkStation HD-H series Bedienungsanleitung

Buffalo

Buffalo TeraStation III TS-IXL Bedienungsanleitung

Buffalo

Buffalo TS3210DN Bedienungsanleitung

Buffalo

Buffalo LS210D Bedienungsanleitung

Buffalo

Buffalo TeraStation HD-HTGL Bedienungsanleitung

Buffalo

Buffalo LS220D0802-EU Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS 5000 Bedienungsanleitung

Buffalo

Buffalo TeraStation TS5210DN Bedienungsanleitung

Buffalo

Buffalo TeraStation TS3220DN Bedienungsanleitung

Buffalo

Buffalo LinkStation LS-VL Bedienungsanleitung

Buffalo

Buffalo TeraStation WSH5610DN2 Bedienungsanleitung

Buffalo

Buffalo TeraStation WSS 5000R2 Bedienungsanleitung

Buffalo

Buffalo TeraStation Pro WSS Bedienungsanleitung

Buffalo

Buffalo TeraStation Bedienungsanleitung

Buffalo

Buffalo LINKSTATION HS-DGL Bedienungsanleitung

Buffalo

Buffalo TeraStation 3020 Bedienungsanleitung

Buffalo

Buffalo TeraStation 3010 Bedienungsanleitung

Buffalo

Buffalo LS-WVL Bedienungsanleitung

Buffalo

Buffalo TeraStation 5010 TS5210DN Bedienungsanleitung

Buffalo

Buffalo BS-GU2005P Bedienungsanleitung

Beliebte Netzwerkspeicherserver Handbücher anderer Marken

HP NetStorage 6000 Bedienungsanleitung

Seagate

Seagate U10 ST320423A Bedienungsanleitung

Synology

Synology RackStation RS816 Handbuch

D-Link

D-Link ShareCenter Pro DNS-1200-05 Bedienungsanleitung

Avid Technology

Avid Technology VideoRAID ST Sicherheitsleitfaden

Western Digital

Western Digital My Cloud Home Duo Bedienungsanleitung

PrimeArray

PrimeArray 4xxx Bedienungsanleitung

Planex

Planex MZK-NAS01SG Bedienungsanleitung

Intel

Intel SS4000-E - Entry Storage System NAS Server Bedienungsanleitung

Synology

Synology RS2212+ Bedienungsanleitung

Allnet

Allnet ALL69000 Bedienungsanleitung

Adaptec

Adaptec 5325301580 Bedienungsanleitung

Motorola

Motorola EXORdisk II Bedienungsanleitung

Sony

Sony XDAAI1PK Bedienungsanleitung

Cisco

Cisco Linksys NAS200 Original Betriebsanleitung

Sans Digital

Sans Digital MR4UT6G Bedienungsanleitung

AIC

AIC FB128-LX Bedienungsanleitung

Dell

Dell PowerVault NX3500 Gebrauchsanweisung