Bushnell Imageview 11-1025 Bedienungsanleitung

LIT. #: 98-0210/07-04

Model #: 11-1025, 11-1025C, 11-1025CL

English…………………………………………………....4-17

French…………………………………………………….18-31

Spanish………………………………………………..….32-45

German……………………………………………..…….46-59

Italian...……………………………………………..…….60-73

Portuguese…..……………………………………..…….74-87

System Requirements:

Pentium 166MMX minimum

(Recommended Pentium II 266)

Windows 95 / 98 /ME / NT and Windows 2000/XP

Minimum 32 MB of RAM

USB port

Minimum 200 MB of Hard Drive space with additional 65 MB space for IE and

DirectX

CD-ROM driver

Super VGA Monitor and video card

Software Installation:

Load software prior to connecting your camera to your computer.

To load software insert CD into your CD-ROM drive and it will self-start. The CD

contains the PhotoSuite software as well as the drivers that will allow your computer

to recognize your camera. Even if you have photo-imaging software on your computer

and do not need the MGI PhotoSuite software, you will still need to install the drivers

for the camera.

Follow the "On Screen" instructions. If your computer does not have an auto play

function and will not automatically run CDs, open the CD in the "My Computer"

window and click on the "Install Drivers" folder. After drivers are successfully

installed, click on "Install MQI PhotoSuite 4SF" to install the photo imaging software.

If you are in need of technical support on MGI PhotoSuite software: (800)-423-3537.

Congratulations on your purchase of the Bushnell ImageView®

binocular! The Bushnell ImageView binocular takes the technology

of digital photography and combines it with a high-quality

compact binocular. This allows you to observe sporting events,

wildlife, scenic vistas or anything you would normally use a

binocular for, and then save the image in a built-in attached digital

camera. You can then download these images to your computer

and e-mail them to your friends and family, print off the picture

using the included software or save them in a photo album for

future use.

ENGLISH

CAMERA OPERATION INSTRUCTIONS

A. Button Descriptions

a. The MODE button has three functions:

1. Power on: Press and hold button until camera turns on. When camera is

connected to a PC via the USB cable provided, the camera will power

on automatically

2. Power off: While camera is on, press and hold button until camera turns off.

If camera has not been used or if a button has not been pressed for over

2 minutes, the camera will automatically power off to save battery life. If the

camera is connected via USB, camera will not power off except when PC

powers off.

3. Mode change: press this button rapidly

to change modes.

b. The SNAP button has two functions:

1. Take a picture: press this button to take

a picture when the camera is on. (But not

in the pc mode and mode change)

2. Select: in "Mode Change", press this

button to confirm the function that

is flashing.

B. LCD Display

1. Timer: Select the timer to take a delayed

picture. This gives you approximately a

10 second delay.

2. Repeat Shot: Takes 3 continuous shots,

with only one press of the SNAP button.

Shots are approximately 1 second apart.

3. Hi/Low Quality: No icon shows when

camera is in High Resolution Mode

(640 X 480). "LQ" shows when camera is in

Low Resolution Mode (320 X 240).

4. AVI Mode: This mode allows you to take

short movie clips, saved as ".avi" files.

5. Battery Indicator: Shows the amount of battery life left.

6. 50/60: Shows electrical power frequency output. "50" corresponds to 50Hz

electrical power frequency, and "60" corresponds to 60Hz electrical power

frequency, which is the frequency used in the United States. The correct setting

(i.e. 60 in the U.S., 50 in some countries) will not cause any flickering on images.

7. Delete Last/All: " " deletes the last picture taken, and " " deletes all the

pictures in the memory.

8. Picture Number/PC/Memory-Full: This area will show the number of pictures

in the memory when camera is in "Normal" mode. "PC" will appear when unit is

plugged in via USB cord to your PC. When memory is full in "Normal" mode,

display will show "FUL" and alarm will sound.

MODE SNAP

OPERATION GUIDE

The camera is powered by two "AAA" batteries (not included) or USB power (included)

2. Insert two AAA alkaline batteries into battery compartment

3. Press and hold MODE button until camera turns on.

4. Press SNAP to take a picture, or press MODE button quickly to change mode

settings as described above. The camera is set at infinity and will not be focused

on an object closer than 20 feet.

5. The mode setting operation is a cycle loop, so press MODE button to switch to

another mode. The loop order of the different modes is shown here:

6. To change settings, toggle through the different modes by pressing the MODE

button. When a mode is selected, the indicator symbol on the LCD will start

flashing. You can then select that mode by then pressing the SNAP button.

7. When changing modes, if no buttons are pressed for 5 seconds, the camera will

return to normal mode.

8. When in "Normal" mode, press SNAP to take a picture.

9. When in "Normal" mode, pressing the MODE button will cause the camera to

enter "Mode Change."

10. To change to the "Self-Timer" mode, press MODE once and then press SNAP to

select. The self-timer is now on. The camera will remain in this mode until you

change the mode.

11. When in "Normal" mode press MODE button twice to change

to "Repeat Shot" mode. When you see the " " icon blinking,

press SNAP to enter this mode (the “ “ icon will stop

blinking). By pressing and holding the SNAP button you

will now be able to take 3 consecutive pictures. The camera

will remain in this mode until you change the mode or until the

camera’s memory is full. When memory is full the display will show "FUL" and an

alarm will sound.

Press MODE Press SNAP to enter this mode

Alarm will sound

15. If "Delete Last" mode is selected, the display will show the following:

Press SNAP to delete the last picture from the camera’s memory.

16. If "Delete All" mode is selected, the word "ALL" appears next to the icon on the

display. To delete all pictures in the camera’s memory, select this mode. The picture

number will then blink. Press and hold the SNAP button. You will hear a tone that

becomes higher as the pictures are deleted. Once complete, the picture number

will reset to zero.

If no button is pressed for a while, the camera returns to stand-by.

17. If the "Battery" indicator is only one third highlighted, it is necessary to replace the

batteries soon.

12. To enter "Low Resolution" mode, which will cause your

pictures to be of a lower resolution, but will also allow you to

store many more pictures in the camera’s memory, press the

MODE button 3 times until you see the "LQ" icon blinking.

Press the SNAP button to select this mode. The "Low" icon

will then stop blinking. Entering this mode later and pressing

SNAP again will return you to "High Resolution" mode.

13. When in "Normal" mode press the MODE button 4 times to enter the "AVI"

mode. The " " icon will begin to blink. Press the SNAP button to select this

mode. The " " will then stop blinking. Holding down the SNAP button will

take AVI clips as long as you continue to depress the button or until the memory

is full. Once you release the button the camera will revert back to "Normal" mode

so you can take still (i.e. non-action) pictures again as long as there is unused

memory left.

Repeat step 11 if you want to change the camera to the AVI mode again.

14. You can chose between the 50mhz and 60mhz settings for the camera output.

The camera’s default mode is the "60" mode, which matches the power frequency

for the United States. To change to the "50" mode, press the SNAP button until

the "60" changes to "50." Confirm the selection by pressing the SNAP button. To

avoid any flickering on the picture, the correct power frequency (either 50 or 60)

for your country must be selected.

delete last picture then quit this mode

the " " icon will blink and buzzer will sound

EYE ADJUSTMENTS (Figure 1)

How to Adjust For Distance Between Your Eyes

The distance between the eyes, called "interpupillary

distance," varies from person to person. To achieve

perfect alignment of lens to eye, follow these simple

steps.

1. Hold your binocular in the normal viewing position.

2. Grasp each barrel firmly. Move the barrels closer

together or further apart until you see a single

circular field. Always re-set your binocular to this

position before using.

How to Adjust For Individual Eye Strength

As individual eyesight varies from one person to another,

most Bushnell binoculars have a diopter setting feature

which allows you to fine-tune the binocular to your vision.

Follow the focusing instructions below for your type of

binocular.

FOCUSING

1. Adjust interpupillary distance. (Figure 1)

2. Set the "diopter setting" (Figure 2) to zero and view

a distant object.

3. Keep both eyes open at all times.

4. Using a lens cover or your hand, cover the objective

(front) lens of the same side of the binocular that has

18. If the camera is connected to your PC via USB cable, the display will show

DOWNLOADING THE PICTURES TO YOUR COMPUTER:

WARNING: Make sure you download any pictures from your camera before

you remove the batteries from the camera.

Follow the instructions on the software to successfully download and save the pictures

on your computer. An installation screen will automatically guide you through the

installation process.

BINOCULAR INSTRUCTIONS

Your Bushnell binocular is a precision instrument designed to provide many

years of pleasurable viewing. This portion of the booklet will help you achieve

optimum performance by explaining how you can adjust the binocular to

your eyes, and how to care for this instrument. Read the instructions carefully

before using your binocular.

INTERPUPILLARY DISTANCE

Fig. 1

DIOPTER SETTING

Fig. 2

ROLL-DOWN EYECUPS

Fig. 3

4. CAUTION: Looking directly at the sun with your binocular may be very harmful to

your eyes.

5. Never expose your ImageView binocular to any type of excessive of liquid or fluid,

as the binocular is not water/fogproof.

6. Take the batteries out of your ImageView if you are not going to use for a long

period of time. (Make sure you download any pictures from your camera

before you remove the batteries out of the camera.)

CLEANING

1. Blow away any dust or debris on the lens (or use a soft lens brush).

2. To remove dirt or finger prints, clean with a soft cotton cloth rubbing in a circular

motion. Use of a coarse cloth or unnecessary rubbing may scratch the lens

surface and eventually cause permanent damage. A "microfiber" cleaning cloth

(available at most photo dealers) is ideal for the routine cleaning of your optics.

3. For a more thorough cleaning, photographic lens tissue and photographic-type lens

cleaning fluid or isopropyl alcohol may be used. Always apply the fluid to the

cleaning cloth – never directly on the lens.

the "diopter setting." This is usually the right side. (The left side on zoom models.)

5. Using the center focus wheel, focus on a distant object with fine detail (e.g., brick

wall, tree branches, etc.) until it appears as sharp as possible.

6. Uncover the objective lens on the diopter side, cover the other objective lens, then

view the same object.

7. Using the "diopter setting" adjustment ring, focus the same object being viewed.

Caution should be used as over turning or forcing the diopter eyepiece can cause

damage or cause the eyepiece to break away from the chassis.

8. Your binocular should be adjusted for your eyes. Focus at any far or near distances

can now be attained simply by turning the center focus wheel. Make a note of the

diopter setting for your eyes for future reference.

EYECUPS (Figure 3)

Your Bushnell binocular is fitted with rubber roll-down eyecups designed for your

comfort and to exclude extraneous light. If you wear sun/eyeglasses, roll down the

eyecups. This will bring your eyes closer to the binocular lens thus providing improved

field of view.

INSTRUCTIONS FOR CARE OF BINOCULARS

Your Bushnell binocular will provide years of trouble-free service if it receives the normal

care you would give any fine optical instrument. Non-waterproof models should not be

exposed to excessive moisture.

1. If your binocular has roll-down, flexible eyecups, store it with the eyecups up. This

avoids excessive stress and wear on the eyecups in the down position.

2. Avoid banging and dropping.

3. Store in a cool, dry place.

WARNING

Make sure you download any pictures from your camera

BEFORE you remove the batteries from the camera.

WARNING

Do NOT look directly at the sun through your binoculars.

Doing so may cause permanent eye damage.

2 AAA Batteries Required, Not Included

1716

TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two

years after the date of purchase. In the event of a defect under this warranty, we will, at our option,

repair or replace the product, provided that you return the product postage prepaid. This warranty

does not cover damages caused by misuse, improper handling, installation, or maintenance provided

by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1) A check/money order in the amount of $10.00 to cover the cost of postage and handling

2) Name and address for product return

3) An explanation of the defect

4) Proof of Date Purchased

5) Product should be well packed in a sturdy outside shipping carton, to prevent

damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. Send To: IN CANADA Send To:

Bushnell Performance Optics Bushnell Performance Optics

Attn.: Repairs Attn.: Repairs

8500 Marshall Drive 25A East Pearce Street, Unit 1

Lenexa, Kansas 66214 Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for

applicable warranty information. In Europe you may also contact Bushnell at:

BUSHNELL Performance Optics Gmbh

European Service Centre

MORSESTRASSE 4

D- 50769 KÖLN

GERMANY

Tél: +49 (0) 221 709 939 3

Fax: +49 (0) 221 709 939 8

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

Système Requis :

Pentium 166MMX minimum

(Pentium II 266 recommandé)

Windows 95 / 98 / ME / NT et Windows 2000/XP

Minimum 32 Mo de RAM

Port USB

Minimum 200 Mo d'espace sur disque dur avec

espace supplémentaire de 65 Mo pour IE et DirectX

Lecteur de CD-ROM

Écran Super VGA et carte vidéo

Installation du Logiciel :

Chargez le logiciel avant de connecter l'appareil photo à l'ordinateur.

Pour charger le logiciel, introduisez le CD dans le lecteur de CD-ROM et le logiciel

se lance de lui-même. Le CD contient le logiciel PhotoSuite ainsi que les pilotes qui

permettent à l'ordinateur de reconnaître l'appareil photo. Même si l'ordinateur contient

déjà un logiciel de photos-images et ne nécessite pas le logiciel PhotoSuite de MGI, il

est nécessaire d'installer les pilotes pour l'appareil photo.

Suivez les instructions sur l'écran. Si l'ordinateur ne comporte pas la fonction de lecture

automatique et ne démarre pas automatiquement les CD, ouvrez le CD dans la fenêtre

« Mon ordinateur » et cliquez sur le répertoire « Installer les pilotes ». Une fois que

les pilotes ont été installés, cliquez sur « Install MQI PhotoSuite 4SF » pour installer le

logiciel de photos-images. Pour une assistance technique au sujet du logiciel PhotoSuite

de MGI: (800)-423-3537 ou (913)-752-3400.

Félicitations et merci d'avoir acheté les jumelles ImageView® de

Bushnell ! La technologie de la photographie numérique associée à

celle des jumelles compactes de haute qualité se retrouve dans les

jumelles ImageView de Bushnell. Cet instrument permet d'observer

des rencontres sportives, la faune, des paysages ou tout ce que

l'on regarde normalement avec des jumelles puis de sauvegarder

ces images au moyen de l'appareil photo numérique intégré. Il est

alors possible de transférer ces images sur un ordinateur et de les

envoyer aux amis et à la famille par courrier électronique, ou de

les imprimer à l'aide du logiciel inclus, ou de les conserver dans un

album-photo pour une utilisation ultérieure.

FRENCH

Andere Handbücher für Imageview 11-1025

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Bushnell Fernglas Handbücher

Bushnell

Bushnell LEGEND BB842W Bedienungsanleitung

Bushnell

Bushnell ImageView 18-0832 Bedienungsanleitung

Bushnell

Bushnell Binocular Bedienungsanleitung

Bushnell

Bushnell 190836 Bedienungsanleitung

Bushnell

Bushnell 137501 Bedienungsanleitung

Bushnell

Bushnell 260650 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-1027 Bedienungsanleitung

Bushnell

Bushnell FUSION X Bedienungsanleitung

Bushnell

Bushnell ImageView 11-8200 Bedienungsanleitung

Bushnell

Bushnell PowerView 14-1042 Bedienungsanleitung

Bushnell

Bushnell Spectator Sport Series Bedienungsanleitung

Bushnell

Bushnell 11 0834 Bedienungsanleitung

Bushnell

Bushnell 13-1250 Bedienungsanleitung

Bushnell

Bushnell ELITE1500ARCTM 20-5101 Bedienungsanleitung

Bushnell

Bushnell ImageView 98-0917/04-09 Bedienungsanleitung

Bushnell

Bushnell ImageView 11-0832 Bedienungsanleitung

Bushnell

Bushnell POWERVIEW 2 Bedienungsanleitung

Bushnell

Bushnell ImageView 110833 Bedienungsanleitung

Bushnell

Bushnell 62-0726 Bedienungsanleitung

Bushnell

Bushnell Marine 13-7500 Bedienungsanleitung

Bushnell

Bushnell LYNX 260401 Bedienungsanleitung

Bushnell

Bushnell EQUINOX Z Bedienungsanleitung

Bushnell

Bushnell Compact Instant Replay 11-8323 Bedienungsanleitung

Bushnell

Bushnell 23-2811 Bedienungsanleitung

Beliebte Fernglas Handbücher anderer Marken

Celestron

Celestron VistaPix 72218 Bedienungsanleitung

Levenhuk

Levenhuk Atom Digital DNM200 Bedienungsanleitung

ATN

ATN PS-15 Bedienungsanleitung

Bresser

Bresser TOPAS 7x50 Bedienungsanleitung

Berger & Schroter

Berger & Schroter LN-G3-B50 Bedienungsanleitung

Leica

Leica geovid 8x42 HD-R Bedienungsanleitung

Noblex

Noblex NF 8 x 42 inception Bedienungsanleitung

PHOTONIS

PHOTONIS VYPER Bedienungsanleitung

ATN

ATN 6015-WPT Bedienungsanleitung

Famous Trails

Famous Trails ViewCatcher DCB 822 Bedienungsanleitung

AGM

AGM EXPLORATOR FSB50-640 Bedienungsanleitung

Opticron

Opticron Marine-3 7x50 BIF.GA Installationsanleitung

Kayoba

Kayoba 009129 Bedienungsanleitung

Vixen

Vixen ARENA Series Bedienungsanleitung

MAGINON

MAGINON NVB 60 Bedienungsanleitung

Leica

Leica Geovid 56 Bedienungsanleitung

Leica

Leica GEOVID PRO Bedienungsanleitung

Celestron

Celestron LandScout Bedienungsanleitung