C.P. Electronics EBDHS-MB-DNET1 Bedienungsanleitung

PIR Sensor

Detects movement within the unit’s detection range,

allowing load control in response to changes in occupancy.

IR Receiver

Receives control and programming commands from an

IR (infrared) handset.

Light Level Sensor

Measures the overall light level in the detection area

Front view

PIR lens

which covers...

IR Receiver

Light Level Sensor

Status LED

Overview

Features

Luminaire mount high bay PIR DALI network

EBDHS-MB-DNET1

Cables to luminaire DALI network

EBDHS-MB-DNET1-LT30

Special order version that can be used down to -30ºC

Product Guide

The EBDHS-MB-DNET1 is a combined passive infrared

(PIR) motion sensor and photocell designed to be part of a

DALI network. The EBDHS-MB-DNET1 is a high sensitivity

PIR detector suitable for high bay applications, such as

warehouses and factories, and where high detection sensi-

tivity is needed. It is specifically designed for mounting onto

a batten style luminaire.

Functioning as a presence detector, the unit returns occu-

pancy data to the DALI network.

The photocell provides a lux level measurement value to

the DALI network.

The units are IP65 rated as standard and are therefore suit-

able for outdoor use as well as wet and wash-down areas.

A selection of fixing washers are supplied to aid fixing to a

variety of luminaires.

For a copy of the DALI ‘Command set’, contact CP Elec-

tronics’ technical support.

Detection diagrams

Range

Detection pattern

Walk towards

Walk across

Height Range Diameter

15m 30m

10m 20m

6m 12m

3m 8m

Height Range Diameter

15m 40m

10m 26m

6m 16m

3m 9m

Maximum mounting height 20m

Alignment marks

The sensor head

has 4 alignment

marks. These

correspond to the

4 outer passive

infrared sensors

under the lens.

Use these marks

to align with aisles

and corridors to

ensure the best

detection

characteristics.

See example

overleaf.

Masking

The EBDHS-MB-DNET1 includes two clip-on masking shields to allow for precise masking of the detection shape.

The masks can be easily shaped to produce detection patterns suitable for applications such as aisles and corners and

for narrowing the detection diameter.

Important note. Ensure all infra-red (IR) programming is completed before affixing the masking shields to the

detector.

The masking shields may impair the light sensor and IR sensors by covering them. Ensure

correct operation before completing commissioning.

Radial tear pattern for

narrowing the detection

diameter

Lateral tear pattern for

making a ‘slot’ style

detection shape

Applications

Aisles

Masking shields trimmed for aisle shaped detection

Narrow detection

Masking shields trimmed for a narrow beam of detection

1 2 3 4 4 3 2 1

Slot

number

Masking shield

% coverage

1 45%

2 32%

3 22%

4 11%

Slot number

2 3 4

Diameter

number

Masking shield

% coverage

1 89%

2 63%

3 45%

4 32%

5 22%

5 5 4 3 2 1

Diameter number 1

Example

Mounting height 6m

Trimmed to slots 2

Aisle detection width 16m x 32% = 5.1m walk across

12m x 32% = 3.8m walk towards

Example

Mounting height 15m

Trimmed to diameter 3

Detection diameter 40m x 45% = 18m walk across

30m x 45% = 13.5m walk towards

Align trimmed shields with sensor head

alignment marks and aisle.

Installation

Components

Standard luminaire fitting

IP luminaire fitting

Part Quantity

Supplied

IP Spacer with silicone coating 1

Silicone washer 1

5º washer 1

5º spacer 1

M20 nut 1

Mounting hole without key

Mounting hole with key

Note. Key to be at top of

sensor.

Note. Use the 5ºspacers

where the luminaire

housing has a draft angle.

Important

Ensure that the silicone washer and/or the IP spacer are used to maintain IP rating.

Do not grip unit at the lens end. Hold the square body near the threaded end when installing and tightening the

nut. Care must be taken to prevent damage to the lens and surrounding IP seal.

Wiring

DALI

The EBMHS-MB-DNET1 supplied with two 1m wires to

connect to the DALI network. The device is designed to

operate correctly with reversed polarity.

This page intentionally left blank

Technical data

Ref. #WD880 Issue 1

Dimensions See diagrams on page 1

Weight 0.15kg

Supply Voltage 9.5VDC—22.5VDC via DALI

Supply Current 8mA

Terminal Capacity 2.5mm2 (solid or stranded)

Material (casing) Flame retardant ABS and PC/ABS

Temperature EBMHS-MB-DNET1

-10ºC to 35ºC

EBMHS-MB-DNET1-LT30

-30ºC to 35ºC

Humidity 5 to 95% non-condensing

Material Flame retardant ABS/PC

Type Class 2

IP rating IP65

Compliance EMC-2014/30/EU

LVD-2014/35/EU

Inhaltsverzeichnis

Andere C.P. Electronics Zubehör Handbücher

C.P. Electronics

C.P. Electronics MWS3A-KNX Bedienungsanleitung

C.P. Electronics

C.P. Electronics SPIR-FVF Bedienungsanleitung

C.P. Electronics

C.P. Electronics SPIR-F/C-IP Bedienungsanleitung

C.P. Electronics

C.P. Electronics MWS5 Bedienungsanleitung

C.P. Electronics

C.P. Electronics MWS1A-PRM Bedienungsanleitung

C.P. Electronics

C.P. Electronics EBDHS-B01-DD Bedienungsanleitung

C.P. Electronics

C.P. Electronics EBDSPIR-PRM Bedienungsanleitung

C.P. Electronics

C.P. Electronics EBMINT Bedienungsanleitung

C.P. Electronics

C.P. Electronics ALC-PRM-VFC Bedienungsanleitung

C.P. Electronics

C.P. Electronics SPIR-F Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung