Cabletron Systems CyberSWITCH CSX500 Bedienungsanleitung

PN 9032534-03 Page 1 of 2

CSX500 SETUP GUIDE

PRE-CONFIGURATION INFORMATION

This Setup Guide describes the tools needed to conﬁgure the CyberSWITCH CSX500.

Figure 1 shows the CyberSWITCH CSX500.

Figure 1 The CSX500

QuickSet CONFIGURATION SETUP

Tools needed

The following tools are required to conﬁgure the CSX500:

• Personal Computer (PC)

•

Read Me First!

instruction sheet (enclosed in the manual package)

• QuickSet CD (located in the shipping box with your device)

Only qualiﬁed personnel should install the CSX500.This Setup Guide is intended for the experienced

network equipment installer.

NOTE

For further details concerning the operation of the CSX500, refer to the HSIM-W84 documentation on

the QuickSet CD.The HSIM-W84 is similar to the CSX500.The difference is that the HSIM-W84 is a

module that is installed into a host device, while the CSX500 is a standalone unit. All other information

pertaining to the device is the same.

NOTE

Cabletron Systems highly recommends using the QuickSet utility to conﬁgure the CSX500. Using the

QuickSet CD will ensure a fast and correct installation.Using other methods may not produce correct or

as efﬁcient results as the QuickSet CD.

STS

LNK

STS

LNK

STS

LNK

STS

LNK

STS

LNK

TELCO

T1-1 T1-2 T1-3 T1-4 ASYNC

CONSOLE CPU

PWR

ROUTER/SWITCH/INVERSE MUX

LAN

ENET

WAN BRANCH OFFICE CONCENTRATOR

CSX500 Setup Guide

PN 9032534-03 Page 2 of 2

QuickSet Utility: Conﬁguring the CSX500

Refer to the QuickSet QuickStart Guide located inside the QuickSet CD jewel case and follow the QuickSet

procedure to conﬁgure the CSX500.

Full or Half Duplex Conﬁguration on the LAN Port

If the version of QuickSet that you are running does not have the button in QuickSet to change the duplex setting,

use the following procedure.

The LAN port on the CSX500 is set to connect using half duplex by default. If a LAN connection is needed for full

duplex, the CSX500 must be conﬁgured using Network Tools. Refer to the Cabletron Systems

Local Management

User’s Guide for CSX200, CSX400, CSX400-DC, HSIM-W6, and HSIM-W84

to conﬁgure the CSX500 using

Network Tools. Use the following procedure to set the port to full duplex:

1. Use this OID to change the LAN port from the default of half duplex to full duplex:

ctIf Duplex: 1.3.6.1.4.1.52.4.3.3.2.1.1.5

2. Set the OID string to 3 (full) in order to set the port to full duplex. Set the OID string to 2 (standard) for the port

to be set to half duplex speed.

GETTING HELP

For additional support, contact the Cabletron Systems Global Call Center:



Cabletron Systems

and

QuickSet

are registered trademarks, and

SmartSwitch

is a trademark of Cabletron Systems, Inc.

NOTE

Refer to the

Read Me First!

instruction sheet enclosed with the device to ensure that your PC is ready for

the QuickSet conﬁguration using the QuickSet CD.

NOTE

If the LAN connection required is half duplex, and the port is conﬁgured for full duplex, the connection

may appear to work, but problems can occur on the network.To prevent data corruption, change the

connection to the appropriate duplex setting.

If a bootp download is required at full duplex speed, an internal DIP switch must be accessed and

switch 1 of the DIP switch set for the bootp to be successful. Refer to the Cabletron Systems

Local

Management User’s Guide for CSX200, CSX400, CSX400-DC, HSIM-W6, and HSIM-W84

for

more information on the bootp download procedure.

World Wide Web http://www.cabletron.com/

Phone (603) 332-9400

Internet mail support@cabletron.com

FTP ftp://ftp.cabletron.com/

anonymous

Password

your email address

To send comments or suggestions concerning this document, contact the

Cabletron SystemsTechnical Writing Department via the following

email address:

[email protected]

Make sure to include the document Part Number in the email message.

Inhaltsverzeichnis

Andere Cabletron Systems Netzwerk-Router Handbücher

Cabletron Systems

Cabletron Systems SmartSwitch Router Montageanleitung

Cabletron Systems

Cabletron Systems CyberSWITCH CSX400 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ESX-1380 Montage- und Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 2200 Bedienungsanleitung

Cabletron Systems

Cabletron Systems NB20E Bedienungsanleitung

Cabletron Systems

Cabletron Systems DELST-UI Programmierhandbuch

Cabletron Systems

Cabletron Systems CSX100 series Bedienungsanleitung

Cabletron Systems

Cabletron Systems ESX-1380 Programmierhandbuch

Cabletron Systems

Cabletron Systems Spectrum EMM-E6 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSWITCH 7H02-06 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch Router Montageanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9T106-01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch Router 520 Bedienerhandbuch

Cabletron Systems

Cabletron Systems Network Router Bedienungsanleitung

Cabletron Systems

Cabletron Systems 2000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9F106-02 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXM Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ELS100 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXG Bedienungsanleitung

Cabletron Systems

Cabletron Systems BRIM-E6 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SMARTSWITCH ROUTER 9032578-05 Montageanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9T101-04 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ELS100 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise