Cabletron Systems ESX-1380 Programmierhandbuch

1574-01

7X 8X 9X 10X 11X 12X1X 2X 3X 4X 5X 6X

ESX-1320

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

ESX-1380

COM 2 COM 1

DISPLAY RESET

MULTI PORT ETHERNET SWITCH

WITH FDSE™AND LANVIEW®

PWR

CPU

RECEIVE

TRANSMIT

PORT

1234 56789101112

BRIM-A100

STY

LNK

XMT

RCV

PORT 12

TXRX

PORT 11

TXRX

PORT 10

TXRX

PORT 9

TXRX

PORT 8

TXRX

PORT 7

TXRX

PORT 6

TXRX

PORT 5

TXRX

PORT 4

TXRX

PORT 3

TXRX

PORT 2

TXRX

PORT 1

TXRX

ESX-1320/ESX-1380

LOCAL MANAGEMENT GUIDE

ESX-1320/ESX-1380 Local Management Guide i

NOTICE

Cabletron Systems reserves the right to make changes in speciﬁcations and other information

contained in this document without prior notice. The reader should in all cases consult Cabletron

Systems to determine whether any such changes have been made.

The hardware, ﬁrmware, or software described in this manual is subject to change without notice.

IN NO EVENT SHALL CABLETRON SYSTEMS BE LIABLE FOR ANY INCIDENTAL,

INDIRECT, SPECIAL, OR CONSEQUENTIAL DAMAGES WHATSOEVER (INCLUDING BUT

NOT LIMITED TO LOST PROFITS) ARISING OUT OF OR RELATED TO THIS MANUAL OR

THE INFORMATION CONTAINED IN IT, EVEN IF CABLETRON SYSTEMS HAS BEEN

ADVISED OF, KNOWN, OR SHOULD HAVE KNOWN, THE POSSIBILITY OF SUCH

DAMAGES.



Printed in the United States of America

Order Number: 9031907 April 1996

SPECTRUM

LANVIEW

MicroMMAC

, and

BRIM

are registered trademarks and

Element

Manager

EPIM

EPIM-A

EPIM-F1

EPIM-F2

EPIM-F3

EPIM-T

EPIM-X

ESX-1320

ESX-1380

FOT-F

FOT-F3

HubSTACK

SEH

SEHI

, and

TMS-3

are trademarks of Cabletron

Systems, Inc.

All other product names mentioned in this manual may be trademarks or registered trademarks of

their respective companies.

Printed on Recycled Paper

Notice

ii ESX-1320/ESX-1380 Local Management Guide

FCC NOTICE

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions: (1) this device may not cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause undesired operation.

NOTE:

This equipment has been tested and found to comply with the limits for a Class A digital

device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable

protection against harmful interference when the equipment is operated in a commercial environment.

This equipment uses, generates, and can radiate radio frequency energy and if not installed in

accordance with the operator’s manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause interference in which case the user

will be required to correct the interference at his own expense.

WARNING:

Changes or modifications made to this device which are not expressly approved by the

party responsible for compliance could void the user’s authority to operate the equipment.

DOC NOTICE

This digital apparatus does not exceed the ClassA limits for radio noise emissions from digital

apparatus set out in the Radio Interference Regulations of the Canadian Department of

Communications.

Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables

aux appareils numériques de la class A prescrites dans le Règlement sur le brouillage radioélectrique

édicté par le ministère des Communications du Canada.

VCCI NOTICE

This equipment is in the 1st Class Category (information equipment to be used in commercial and/or

industrial areas) and conforms to the standards set by the Voluntary Control Council for Interference

by Information Technology Equipment (VCCI) aimed at preventing radio interference in commercial

and/or industrial areas.

Consequently, when used in a residential area or in an adjacent area thereto, radio interference may be

caused to radios and TV receivers, etc.

Read the instructions for correct handling.

Notice

ESX-1320/ESX-1380 Local Management Guide iii

CABLETRON SYSTEMS, INC. PROGRAM LICENSE AGREEMENT

IMPORTANT:

Before utilizing this product, carefully read this License Agreement.

This document is an agreement between you, the end user, and Cabletron Systems, Inc. (“Cabletron”)

that sets forth your rights and obligations with respect to the Cabletron software program (the

“Program”) contained in this package. The Program may be contained in ﬁrmware, chips or other

media. BY UTILIZING THE ENCLOSED PRODUCT,YOU ARE AGREEING TO BECOME

BOUND BY THE TERMS OF THIS AGREEMENT, WHICH INCLUDES THE LICENSE AND

THE LIMITATION OF WARRANTY AND DISCLAIMER OF LIABILITY. IFYOU DO NOT

AGREE TO THE TERMS OF THIS AGREEMENT, PROMPTLY RETURN THE UNUSED

PRODUCT TO THE PLACE OF PURCHASE FOR A FULL REFUND.

CABLETRON SOFTWARE PROGRAM LICENSE

1. LICENSE. You have the right to use only the one (1) copy of the Program provided in this

package subject to the terms and conditions of this License Agreement.

You may not copy, reproduce or transmit any part of the Program except as permitted by the

2. OTHER RESTRICTIONS. You may not reverse engineer, decompile, or disassemble the

Program.

3. APPLICABLE LAW. This License Agreement shall be interpreted and governed under the laws

and in the state and federal courts of New Hampshire. You accept the personal jurisdiction and

venue of the New Hampshire courts.

EXCLUSION OF WARRANTY AND DISCLAIMER OF LIABILITY

1. EXCLUSION OF WARRANTY. Except as may be specifically provided by Cabletron in

writing, Cabletron makes no warranty, expressed or implied, concerning the Program (including

its documentation and media).

CABLETRON DISCLAIMS ALL WARRANTIES, OTHER THAN THOSE SUPPLIED TO

YOU BY CABLETRON IN WRITING, EITHER EXPRESSED OR IMPLIED, INCLUDING

BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITYAND

FITNESS FOR A PARTICULAR PURPOSE, WITH RESPECT TO THE PROGRAM, THE

ACCOMPANYING WRITTEN MATERIALS, AND ANY ACCOMPANYING HARDWARE.

2. NO LIABILITY FOR CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL

CABLETRON OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER

(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF BUSINESS,

PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, SPECIAL,

INCIDENTAL, CONSEQUENTIAL, OR RELIANCE DAMAGES, OR OTHER LOSS)

ARISING OUT OF THE USE OR INABILITY TO USE THIS CABLETRON PRODUCT,

EVEN IF CABLETRON HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR

LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, OR

ON THE DURATION OR LIMITATION OF IMPLIED WARRANTIES, IN SOME

INSTANCES THE ABOVE LIMITATIONS AND EXCLUSIONS MAY NOT APPLY TO

YOU.

Notice

iv ESX-1320/ESX-1380 Local Management Guide

UNITED STATES GOVERNMENT RESTRICTED RIGHTS

The enclosed product (a) was developed solely at private expense; (b) contains “restricted computer

software” submitted with restricted rights in accordance with Section 52227-19 (a) through (d) of the

Commercial Computer Software - Restricted Rights Clause and its successors, and (c) in all respects

is proprietary data belonging to Cabletron and/or its suppliers.

For Department of Defense units, the product is licensed with “Restricted Rights” as deﬁned in the

DoD Supplement to the Federal Acquisition Regulations, Section 52.227-7013 (c) (1) (ii) and its

successors, and use, duplication, disclosure by the Government is subject to restrictions as set forth in

subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at

252.227-7013. Cabletron Systems, Inc., 35 Industrial Way, Rochester, New Hampshire 03867-0505.

ESX-1320/ESX-1380 Local Management Guide v

CONTENTS

CHAPTER 1 INTRODUCTION

1.1 Using This Manual.......................................................................1-2

1.2 Document Conventions...............................................................1-3

1.3 Local Management Overview......................................................1-3

1.3.1 The Management Agent .................................................1-4

1.3.2 In-Band vs. Out-of-Band.................................................1-4

1.3.3 Local vs. Remote Management......................................1-4

1.4 Local Management Requirements...............................................1-5

1.5 Local Management Screen Elements..........................................1-6

1.6 Local Management Keyboard Conventions.................................1-8

1.7 Navigating Local Management Screens......................................1-9

1.8 Getting Help...............................................................................1-10

CHAPTER 2 LOCAL MANAGEMENT REQUIREMENTS

2.1 Configuring a Local Management Terminal.................................2-1

2.2 Management Terminal Setup Requirements...............................2-2

2.3 Cable Configuration for the Management Terminal.....................2-3

2.4 Establishing a Telnet Connection................................................2-4

CHAPTER 3 ACCESSING LOCAL MANAGEMENT

3.1 Using the Menu Screens.............................................................3-1

3.2 Navigating Local Management Screens......................................3-2

3.2.1 Selecting Local Management Menu Screen Items .........3-3

3.2.2 Exiting Local Management Screens ...............................3-4

3.2.3 Exiting the Local Management Session..........................3-4

3.3 The Main Menu Screen...............................................................3-5

3.4 The Setup Menu Screen..............................................................3-6

3.5 The Status Menu Screen.............................................................3-7

3.6 The Statistics Menu Screen.........................................................3-8

Contents

vi ESX-1320/ESX-1380 Local Management Guide

CHAPTER 4 THE SYSTEM LEVEL SCREEN

4.1 System Level Screen Fields ........................................................4-1

4.2 Setting the System Date ..............................................................4-3

4.3 Setting the System Time..............................................................4-4

4.4 Setting the Host IP Address.........................................................4-5

4.5 Setting the Subnet Mask..............................................................4-6

4.6 Setting the Default Gateway........................................................4-6

4.7 Setting the Default Interface ........................................................4-7

4.8 COM Port Applications.................................................................4-7

CHAPTER 5 THE SNMP COMMUNITY NAMES SCREEN

5.1 Community Name Access Policy.................................................5-2

5.2 Setting SNMP Community Names...............................................5-2

CHAPTER 6 THE SNMPTRAPS SCREEN

6.1 Trap Table Screen Fields.............................................................6-1

6.2 Setting the SNMP Trap Destination.............................................6-2

CHAPTER 7 THE FLASH DOWNLOAD SCREEN

7.1 Selecting a FLASH Download Method.........................................7-2

7.1.1 BootPROM Download.....................................................7-2

7.1.2 Runtime Download..........................................................7-3

7.2 Selecting a FLASH Download Server..........................................7-3

7.2.1 Changing the Download Server IP..................................7-4

7.2.2 Changing the Download File Name.................................7-4

7.3 Performing a FLASH Download Operation..................................7-4

CHAPTER 8 THE BRIDGE SETUP SCREEN

8.1 Bridge Setup Screen Fields .........................................................8-2

8.2 Selecting a Spanning Tree Protocol ............................................8-2

8.3 Selecting the Port Administrative Status......................................8-3

8.4 Selecting Bridge Port Pair Administrative Status.........................8-4

CHAPTER 9 THE DEVICE SPECIFIC SETUP SCREEN

CHAPTER 10 THE PORT REDIRECT FUNCTION SCREEN

10.1 Port Redirect Function Screen Fields ........................................10-2

10.2 Changing Source and Destination Ports....................................10-2

Contents

ESX-1320/ESX-1380 Local Management Guide vii

CHAPTER 11 THE COMPONENT STATUS SCREEN

CHAPTER 12 THE MIB-2 STATISTICS SCREEN

12.1 MIB-2 Statistics Screen Fields...................................................12-1

12.2 Selecting an Update-Freq..........................................................12-3

12.3 Clearing Statistics Counters......................................................12-4

12.4 Selecting an Interface................................................................12-4

CHAPTER 13 THE MIB NAVIGATOR SCREEN

13.1 Managing Device MIBs..............................................................13-2

13.2 MIB Navigator Command Set Overview....................................13-3

13.2.1 Conventions for MIB Navigator Commands .................13-4

13.2.2 Navigation Commands .................................................13-5

13.2.3 Built-In Commands .....................................................13-12

13.2.4 Special Commands.....................................................13-18

INDEX

Contents

viii ESX-1320/ESX-1380 Local Management Guide

Andere Handbücher für ESX-1380

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Cabletron Systems Netzwerk-Router Handbücher

Cabletron Systems

Cabletron Systems Network Router Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXM Bedienungsanleitung

Cabletron Systems

Cabletron Systems ELS100 Bedienungsanleitung

Cabletron Systems

Cabletron Systems MMAC-Plus 9T106-01 Bedienungsanleitung

Cabletron Systems

Cabletron Systems ELS100 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 2200 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch 9000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSTACK ELS100-24TXG Bedienungsanleitung

Cabletron Systems

Cabletron Systems BRIM E100 BRIM-E100 Bedienungsanleitung

Cabletron Systems

Cabletron Systems 3H02-04 Bedienungsanleitung

Cabletron Systems

Cabletron Systems DELST-UI Programmierhandbuch

Cabletron Systems

Cabletron Systems MMAC-Plus 9T101-04 Bedienungsanleitung

Cabletron Systems

Cabletron Systems CyberSWITCH CSX400 Bedienungsanleitung

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Bedienungsanleitung

Cabletron Systems

Cabletron Systems SSR 2000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch Router Montageanleitung

Cabletron Systems

Cabletron Systems ESX-1380 Montage- und Bedienungsanleitung

Cabletron Systems

Cabletron Systems 2H253-25R Bedienungsanleitung

Cabletron Systems

Cabletron Systems CSX200 CyberSWITCH Bedienungsanleitung

Cabletron Systems

Cabletron Systems SmartSwitch Router 520 Bedienerhandbuch

Cabletron Systems

Cabletron Systems SmartSwitch Router Bedienungsanleitung

Cabletron Systems

Cabletron Systems NB20E Bedienungsanleitung

Cabletron Systems

Cabletron Systems 2000 Bedienungsanleitung

Cabletron Systems

Cabletron Systems SSR 2000 Bedienungsanleitung

Beliebte Netzwerk-Router Handbücher anderer Marken

Allnet

Allnet ALL0333AU Bedienungsanleitung

HomeSeer

HomeSeer HT-SEL Bedienungsanleitung

Sercomm

Sercomm Genesis OC3505D Bedienungsanleitung

Billion

Billion BIPAC 5102 Series Bedienungsanleitung

TP-Link

TP-Link TD-8817 Bedienungsanleitung

Motorola

Motorola MR1900 Bedienungsanleitung

Digi

Digi IX14 Bedienungsanleitung

Cisco

Cisco NCS 540 Handbuch

XAVi

XAVi X8821e Bedienungsanleitung

BEC

BEC 6200WZL Bedienungsanleitung

MikroTik

MikroTik hAP ac3 Series Bedienungsanleitung

Korenix

Korenix JetNet 5428G Series Bedienungsanleitung

NETGEAR

NETGEAR FS526T - Switch Bedienungsanleitung

Korenix

Korenix JetNet 5710G Series Bedienungsanleitung

Automated Logic

Automated Logic ZN551 Betriebsanleitung

Cisco

Cisco ASR 1000 Series Bedienerhandbuch

EnGenius

EnGenius ESR-9710 Bedienungsanleitung

Cisco

Cisco 805 Series Bedienungs- und Sicherheitshinweise