Cannon MiniPV-X Bedienungsanleitung

THANK YOU for your purchase of the miniPV-X automatic viscometer from CANNON Instrument

Company. This guide is designed to provide information about the installation of the miniPV-X.

This is designed to be used along with theminiPV-X Instruction & Operation Manual.

1. Unpack the miniPV-X viscometer

CAUTION

Remove all components from the shipping container(s).

Do NOT lift the miniPVinstrument by the modular side panels (“ears”).

Always support the weight ofthe unit from the BASE.

•Remove all packing materials from the components.

•Verify reception of shipped materials by comparing equipment items

with packing/parts lists. Report missing items toCannon Instrument

Company immediately.

•Inspect each component for signs of damage. Report damages to the

shipper and Cannon Instrument Company immediately.

•Retain all packing materials until the instrument isconnected and

functioning properly.

•If any component(s) must be returned to Cannon Instrument Company,

the damaged item(s) should be packaged in the original shipping

container. Refer tothe final page ofthis guide for instructions on

returning defective equipment. Customers outside the United States

should contact the local Cannon dealer for procedures on returning

products toCannon.

•Review operator safety information in the miniPV-X Instruction &

Operation Manual

•Verify electrical specifications for MAINS power in the miniPV-X

Instruction & Operation Manual.

- 4 -

CANNON® miniPV-X Installation Guide

2139 High Tech Road

State College, PA, 16803 | USA

800-676-6232 | 814-353-8000

- 1 -

miniPV-X viscometer Installation Guide

2139 High Tech Drive

State College, PA 16803 | USA

814-353-8000 | 800-676-6232

service@cannoninstrument.com

cannoninstrument.com

CANNON® miniPV-X Installation Guide

2139 High Tech Road

State College, PA, 16803 | USA

800-676-6232 | 814-353-8000

Power Supply

Waste Receiver A

Connect tubing and cables as indicated in the image. Cut tubing

to length as necessary.

Tubing Detail

A = 6 mm transparent tubing

B = 1/8” transparent tubing

3. Fill bath vessel to the fill line with silicone fluid.

4. Install VISCPRO Software on the controlling PC using

the installation CD or thumb drive.

miniPV-X

Waste Vessel

Power Supply

Solvent

Vessel

Above: Filling the miniPV

bath vessel with bath fluid

using the provided glass

funnel.

Supply power to the miniPVinstrume

nt.

6. Load VISCPRO software.

7. Set the desired control

temperature.

8. Calibrate the instrument per

manual instructions or confirm

calibration data included with your

installation CD or flash drive.

9. Enter sample ID information into

VISCPRO and begin running

samples.

-2 - miniPVInstallation Guide

Cannon Instrument Company®

2139 High Tech Rd

State College, PA

16803

USA

814-353-8007

fax 814-353-8007

cannoninstrument.com - 3 -

Andere Cannon Messgerät Handbücher

Cannon

Cannon UltraVIS 192 Bedienungsanleitung

Cannon

Cannon PolyVISC SPS Bedienungsanleitung

Cannon

Cannon Ravenfield BS/C+ Bedienungsanleitung

Cannon

Cannon CAV 4.2 Bedienungsanleitung

Cannon

Cannon TE-DPV Asphalt Bedienungsanleitung

Cannon

Cannon HTHS Series II Installationsanleitung

Cannon

Cannon miniAV-LT Bedienungsanleitung

Cannon

Cannon CAV 4.2 Bedienungsanleitung

Cannon

Cannon IntelliTroll Bedienungsanleitung

Cannon

Cannon CAV 4.1 Bedienungsanleitung

Cannon

Cannon Densi-H Bedienungsanleitung

Cannon

Cannon CMRV-5000 Installationsanleitung

Cannon

Cannon SimpleVIS Bedienungsanleitung

Cannon

Cannon miniPV Bedienungsanleitung

Cannon

Cannon miniPV-HX Bedienungsanleitung

Cannon

Cannon CAV 4.1 Installationsanleitung

Cannon

Cannon Ravenfield BS/C+ Bedienungsanleitung

Cannon

Cannon Densi-H Bedienungsanleitung

Cannon

Cannon miniAV Series Bedienungsanleitung

Cannon

Cannon CAV-2100 Installationsanleitung

Cannon

Cannon SimpleVIS Bedienungsanleitung

Cannon

Cannon CAV-2100 Bedienungsanleitung

Cannon

Cannon D155 Installationsanleitung

Cannon

Cannon MiniQV-X Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Cannon miniPV-X Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken