Cannon MiniPV Bedienungsanleitung

CANNON® miniPV Installation Guide

Cannon Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

CANNON® miniPV Installation Guide

Cannon Instrument Company

2139 High Tech Road • State College, PA • 16803 • USA

miniPV viscometer

Installation Guide

Purpose THANK YOU for your purchase of the miniPV automatic viscometer

from Cannon Instrument Company. This guide is designed to

provide information about the installation of the miniPV. Refer to

the miniPV Instruction & Operation Manual for more information.

1.Unpack the miniPV viscometer

CAUTION Remove all components from the shipping container(s).

Do NOT lift the miniPV instrument by the modular side panels (“ears”). Always

support the weight of the unit from the BASE.

- 4 - - 1 -

•Remove all packing material from the components.

•Verify reception of shipped materials by comparing equipment items with packing/

parts lists. Report any missing items to Cannon Instrument Company

immediately.

•Inspect each component for signs of damage. Report damages to the shipper and

Cannon Instrument Company immediately.

•Retain all packing materials until the instrument is connected and functioning

properly.

•If any components must be returned to CANNON, the damaged items must be

packaged in the original shipping container. Refer to the Warranty section of the

Instruction & Operation manual for instructions on returning defective equipment.

Customers outside the United States should contact their local CANNON dealer

for return procedures.

•Review the operator safety information in the beginning of the miniPV Instruction

& Operation Manual.

•Verify electrical specifications for MAINS power in the miniPV Instruction &

Operation Manual.

2139 High Tech Road | State College, PA 16803 | USA

814-353-8000 | 800-676-6232

[email protected] | cannoninstrument.com

- 2 - - 3 -

Waste Receiver

Power Supply

Solvent

Vessel

Connect tubing and cables as indicated in the image. Cut tubing

to length as necessary.

Set the desired control

temperature.

Calibrate the instrument per

manual instructions or conrm

calibration data included with your

installation CD.

Enter sample ID information

into VISCPRO and begin running

samples.

Tubing Detail

A = 6 mm transperant tubing

B = 1/8” transperant tubing

miniPV Installation Guide | Cannon Instrument Company® | 2139 High Tech Rd | State College, PA | 16803 | USA | 814-353-8007 | fax 814-353-8007 | cannoninstrument.com

Above: Filling the miniPV series

bath vessel with bath fluid

using the provided glass funnel.

3. Fill bath vessel to the fill line with silicone fluid.

Install VISCPRO Software on the controlling PC using

the installation CD or thumb drive.

Supply power to the miniAV instrument.

Load VISCPRO software.

miniPV

Power Supply

Waste Vessel

Solvent

Vessel

Andere Cannon Messgerät Handbücher

Cannon

Cannon MiniQV-X Bedienungsanleitung

Cannon

Cannon miniPV-HX Bedienungsanleitung

Cannon

Cannon Ravenfield BS/C+ Bedienungsanleitung

Cannon

Cannon Densi-H Bedienungsanleitung

Cannon

Cannon PolyVISC SPS Bedienungsanleitung

Cannon

Cannon CAV 4.1 Installationsanleitung

Cannon

Cannon TE-DPV Asphalt Bedienungsanleitung

Cannon

Cannon CAV 4.1 Bedienungsanleitung

Cannon

Cannon CAV 4.2 Bedienungsanleitung

Cannon

Cannon SimpleVIS Bedienungsanleitung

Cannon

Cannon IntelliTroll Bedienungsanleitung

Cannon

Cannon CAV-2100 Installationsanleitung

Cannon

Cannon Densi-H Bedienungsanleitung

Cannon

Cannon CAV-2100 Bedienungsanleitung

Cannon

Cannon SimpleVIS Bedienungsanleitung

Cannon

Cannon D155 Installationsanleitung

Cannon

Cannon CAV 4.2 Bedienungsanleitung

Cannon

Cannon UltraVIS 192 Bedienungsanleitung

Cannon

Cannon HTHS Series II Installationsanleitung

Cannon

Cannon CMRV-5000 Installationsanleitung

Cannon

Cannon Ravenfield BS/C+ Bedienungsanleitung

Cannon

Cannon miniAV-LT Bedienungsanleitung

Cannon

Cannon miniPV-X Bedienungsanleitung

Cannon

Cannon miniAV Series Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

Siemens

Siemens SITRANS F Coriolis FCT030 Stücklistenhandbuch

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Cannon miniPV Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken