Cannondale Scalpel HT Konfigurationshandbuch

READ THIS SUPPLEMENT AND YOUR

CANNONDALE BICYCLE OWNER’S MANUAL.

Both contain important safety information. Keep

both for future reference.

Owner’s Manual Supplement

Scalpel HT

English

Safety Messages

In this supplement, particularly important information

is presented in the following ways:

Indicates a hazardous situation which, if

not avoided, may result in death or serious

injury.

NOTICE

Indicates special precautions that must be

taken to avoid damage.

SYMBOLS:

NLGI-2

= Apply NLGI2 Synthetic grease or a high-quality bicycle bearing

grease

CRB-GEL

= Apply Carbon Gel, Friction Paste for bicycle components

= Apply Loctite® 242, or medium strength removable thread lock

N·m = Tightening torque in Newton meters.

CONTENTS

Safety Information...........................27

Technical Information....................817

Replacement Parts.............................18

Maintenance ...................................... 19

Cannondale Supplements

This manual is a “supplement” to your

Cannondale Bicycle Owner’s Manual.

This supplement provides additional and

important model speciﬁc safety, maintenance,

and technical information. It may be one of

several important manuals/supplements for

your bike; obtain and read all of them.

Please contact your Authorized Cannondale

Dealer immediately if you need a manual or

supplement or have a question about your bike.

You may also contact us using the appropriate

country/region/location information.

You can download Adobe Acrobat PDF versions

of any manual/supplement from our website:

http://www.cannondale.com.

Contacting Cannondale

Cannondale USA

Cycling Sports Group, Inc.

1 Cannondale Way

Wilton, CT 06897, USA

1800726-BIKE (2453)

CSG Europe (Woudenberg)

Cycling Sports Group Europe B.V.

Geeresteinselaan 57

3931JB Woudenberg

The Netherlands

PH: 00.31.541.200374

International Distributors

Consult our website to identify the appropriate

Cannondale Dealer for your region.

Your Cannondale Dealer

To make sure your bike is serviced and

maintained correctly, and that you protect

applicable warranties, please coordinate all

service and maintenance through your

Authorized Cannondale Dealer.

NOTICE

Unauthorized service, maintenance, or

repair parts can result in serious damage

and void your warranty.

Scalpel HT OMS

Safety Information

Important Composites Message

138678 Rev 1 (09/21)

Safety Information

Important Composites

Message

Your bike (frame and components) is made

from composite materials also known as

“carbon ﬁber.”

All riders must understand a fundamental

reality of composites. Composite materials

constructed of carbon ﬁbers are strong

and light, but when crashed or overloaded,

carbon ﬁbers do not bend, they break.

For your safety, as you own and use the

bike, you must follow proper service,

maintenance, and inspection of all the

composites (frame, stem, fork, handlebar,

seat post, etc.) Ask your Cannondale

Dealer for help.

We urge you to read PART II, Section D.

“Inspect For Safety” in your Cannondale

Bicycle Owner’s Manual BEFORE you ride.

You can be severely injured, paralyzed or

killed in an accident if you ignore this

warning.

Inspection & Crash Damage

Of Carbon Frames/Forks

After A Crash Or Impact:

Inspect frame carefully for damage. See

PART II, Section D. Inspect For Safety in

your Cannondale Bicycle Owner’s Manual.

Do not ride your bike if you see any sign of

damage, such as broken, splintered, or

delaminated carbon ﬁber.

Any of the following may indicate a

delamination or damage:

An unusual or strange feel to the frame

Carbon which has a soft feel or altered

shape

·Creaking or other unexplained noises,

Visible cracks, a white or milky color

present in carbon ﬁber section

Continuing to ride a damaged frame

increases the chances of frame failure, with

the possibility of injury or death of the rider.

Safety Information

Intended Use

Servicing

This supplement may include procedures

beyond the scope of general mechanical

aptitude.

Special tools, skills, and knowledge may be

required. Improper mechanical work

increases the risk of an accident. Any

bicycle accident has risk of serious injury,

paralysis or death.

To minimize risk we strongly recommend

that owners always have mechanical work

done by an Authorized Cannondale Dealer.

Intended Use

The intended use of

all models is ASTM

CONDITION 3,

Cross-Country.

Please read your Cannondale Bicycle

Owner’s Manual for more information about

Intended Use and Conditions 15.

Tightening Torques

Correct tightening torque for the fasteners

(bolts, screws, nuts) on your bicycle is very

important to your safety. Correct tightening

torque for the fasteners is also important for

the durability and performance of your bicycle.

We urge you to have your dealer correctly

torque all fasteners using a torque wrench. If

you decide to torque fasteners yourself always

use a torque wrench.

Find Tightening Torque Information :

The wide range of bicycle models and

components used means that a listing of

tightening torque would be out of date by

the time it was published. Many fasteners

should be installed with a thread locking

adhesive such as Loctite®.

To determine correct tightening torque and

any adhesive application for a fastener we

ask you to check:

Many components are marked. On-

product marking is becoming common.

·Torque specs in the component

manufacturers instructions shipped with

your bicycle.

Torque specs listed on the websites of

component manufacturers.

With your dealer. Dealers have access to

current data and have experience with

correct torque for most fasteners.

Scalpel HT OMS

Safety Information

Maximum Fork Length

138678 Rev 1 (09/21)

Maximum Fork Length

Maximum Fork Length is an important frame safety testing speciﬁcation for front suspension

mountain bikes. You must observe the measurement when installing headset parts, headset

adapters, installing and adjusting a fork, and selecting replacement forks.

To Center Of

The Fork Axle

From

Bottom Of Frame

Head Tube

Maximum

Fork

Length

You must select a replacement fork not only based on head tube diameter but the critical factor

of frame maximum fork length.

Do not exceed maximum fork length. Exceeding the MAXIMUM FORK LENGTH limit can

overload the frame causing it to break while riding.

Your retailer MUST follow and observe this speciﬁcation for your bike. For Maximum Fork

Length speciﬁcations for Cannondale bicycles, see www.cannondale.com.

You can be severely injured, paralyzed or killed in an accident if you ignore this warning.

Safety Information

Tire Size x Maximum Width

Observe the Tire Size x Maximum Width for your bike found in the “Speciﬁcations” page of

this manual.

Mounting the wrong size tires can result in the tires hitting the fork or frame when riding. If this

happens, you can lose control of your bike and you can be thrown o. A moving tire can be

stopped because it touches the fork or frame.

Do not mount tires that are larger than the maximum recommended size. Such tires could contact

the fork, frame, saddle, seatpost, or seatbinder when the suspension is fully compressed or while

riding. Only select tires that are compatible with your bike’s fork and frame design. Also, be sure to

follow the manufacturer’s recommendations of your front fork and rear shock.

When you are considering tires for your bike consider...

The actual measured size of a tire may be dierent than its sidewall marking. Each time you

mount a new tire, take the time to inspect the actual clearance between the rotating tire and all

parts of the frame. The U.S. Consumer Product Safety Commission (CPSC) requires at least 1/16”

(1.6 mm) tire clearance from any part of the bike. Allowing for lateral rim ﬂex and a wheel or rim that

is out-of-true will likely mean choosing a rear tire that provides even more clearance than the

CPSC recommends.

Ask your authorized brand retailer for the right tires for your bike and its particular

components! You can be severely injured, paralyzed or killed in an accident if you ignore this

warning.

1. Serial Number

2. Product Codes

Serial Number

The serial number is located on the bottom

bracket. It is a 7-character barcode (1). Use

this serial number to register your bike.

To register your bike: go to the

Product Registration section of

our website at

www.cannondale.com

Scalpel HT OMS

Safety Information

Minimum Seat Post Insert - Frame

138678 Rev 1 (09/21)

Minimum Seat Post Insert -

Frame

Keep the frame’s minimum seat post

insertion length inserted into the frame at

all times. The length is found in the

“Speciﬁcations” table in this manual.

To mark the seat post with a frame

minimum seat post insertion mark:

1. Remove the seat post.

2. Measure the length of the speciﬁcation

up from the bottom of the seat post.

3. Make a permanent ink line mark on the

seat post.

If you have questions, about minimum seat

post insert of the frame or a seat post

minimum insert, please consult with your

dealer or a professional bicycle mechanic.

Failure to insert and maintain either frame

seat post minimum insert and also seat

post minimum insert, can place very high

stresses these parts causing failure while

riding.

You can be severely injured, paralyzed or

killed in an accident if you ignore this

warning.

Technical Information

Speciﬁcations

Technical Information

All Speciﬁcations subject to change without notice.

Speciﬁcations

Item Speciﬁcation

Head Tube UPR: 1 1/8in LWR: 1 1/2in

Headset Integrated 1 1/8in-1.5in

FSA Orbit C40 ACB

Bottom Bracket: Type/Width 83mm PF30

Front Derailleur N/A

Seat Post: Dia./Binder 27.2mm/30.9mm

Min. Seat Post Insert 100mm

Tire Size x Max. Tire Width 29  2.35in

Max. Fork Length 530mm

Chain Guide K11271 only

Rear Brake: Mount Type / Min./Max. Rotor Dia. Post Mount/160/180mm

Rear Axle: Type/Length Speed Release UDH/148121.0P

173.5mm Overall Length

Intended Use ASTM CONDITION 3: Cross-Country, Marathon,

Hardtails

Max. Weight Limit: Total

(Rider+All Equipment)

305lbs/138kg

Additional Technical Features SRAM UDH, K11271 Chain Guide

Scalpel HT OMS

Technical Information

Geometry - Scalpel HT 100 (Lefty Ocho)

138678 Rev 1 (09/21)

75 mm

D¹

Geometry - Scalpel HT 100 (Lefty Ocho)

Dimensions = centimeters

Speciﬁcations subject to change without notice.

Item Size SM MD LG XL

Wheel Size 29 29 29 29

ASeat Tube Length 39.0 44.0 48.0 53.0

BTop Tube Horizontal 57.1 59.4 61.7 64.0

CHead Tube Angle 67.0 67.0 67.0 67.0

DSeat Tube Angle Eective 75.0 75.0 75.0 75.0

D’ Seat Tube Angle Actual 73.2 74.0 74.6 75.0

E Standover 74.8 78.5 81.4 85.0

FHead Tube Length 9.9 11.0 12.2 13.5

G Wheelbase 112.4 115.4 118.3 121.4

H Front Center 70.2 72.6 75.0 77.6

I Chain Stay Length 43.0 43.5 44.0 44.5

J Bottom Bracket Drop 6.2 6.2 6.2 6.2

K Bottom Bracket Height 28.0 31.5 31.5 31.5

L Fork Rake 5.5 5.5 5.5 5.5

M Trail 10.0 10.0 10.0 10.0

N Stack 60.2 61.2 62.3 63.5

O Reach 41.0 43.0 45.0 47.0

Head Tube Height 51.1 51.1 51.1 51.1

Inhaltsverzeichnis

Andere Cannondale Fahrrad Handbücher

Cannondale

Cannondale E-Series Konfigurationshandbuch

Cannondale

Cannondale SuperSix EVO Konfigurationshandbuch

Cannondale

Cannondale Adventure Neo Konfigurationshandbuch

Cannondale

Cannondale Topstone Neo 5 Bedienungsanleitung

Cannondale

Cannondale Moto Konfigurationshandbuch

Cannondale

Cannondale Mavaro Neo Konfigurationshandbuch

Cannondale

Cannondale Slice Bedienungsanleitung

Cannondale

Cannondale Mountain Hardtail Thru Axle Bedienungsanleitung

Cannondale

Cannondale Kinneto E-Series Bedienungsanleitung

Cannondale

Cannondale Synapse Carbon Bedienungsanleitung

Cannondale

Cannondale LEFTY HYBRID Konfigurationshandbuch

Cannondale

Cannondale Adventure Neo Allroad S 2023 Bedienungsanleitung

Cannondale

Cannondale Jekyll 27.5 Konfigurationshandbuch

Cannondale

Cannondale SuperSix EVO CX Konfigurationshandbuch

Cannondale

Cannondale Jekyll Bedienungsanleitung

Cannondale

Cannondale Scalpel Konfigurationshandbuch

Cannondale

Cannondale SYNAPSE HI-MOD CARBON 2013 Konfigurationshandbuch

Cannondale

Cannondale Moterra Neo Shimano DU-E7000 Konfigurationshandbuch

Cannondale

Cannondale TANDEM Konfigurationshandbuch

Cannondale

Cannondale LEFTY OLIVER Konfigurationshandbuch

Cannondale

Cannondale SUPERMAX Konfigurationshandbuch

Cannondale

Cannondale Synapse Carbon Konfigurationshandbuch

Cannondale

Cannondale Carbon Road Disc Bedienungsanleitung

Cannondale

Cannondale Bicycles Bedienungsanleitung

Beliebte Fahrrad Handbücher anderer Marken

RAMBO

RAMBO R1000X2M-FF-BFD Bedienungsanleitung

Vermeiren

Vermeiren SAFARI Bedienungsanleitung

Velec

Velec A2/36V Bedienungsanleitung

Coswheel

Coswheel A-ONE Bedienungsanleitung

Betzold

Betzold 97869 Bedienungsanleitung

Cervélo

Cervélo S3 2019 Bedienungsanleitung

Tenways

Tenways AGO X Bedienungsanleitung

Festo

Festo EGSC-BS-KF Stücklistenhandbuch

Gio Electric

Gio Electric H1 Volt Bedienungsanleitung

GOGOBEST

GOGOBEST GM30 Bedienungsanleitung

DAHON

DAHON CIAO - 2009 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Kurzanleitung

MV Agusta

MV Agusta Lucky Explorer GRAVEL Gebrauchsanweisung

Greyp

Greyp G6 Series Bedienungsanleitung

Babboe

Babboe Carve-E Bedienungsanleitung

Huka

Huka orthros Bedienungsanleitung

Xtracycle

Xtracycle Stoker 2021 Bedienungsanleitung

APRILIA

APRILIA DORSODURO 750 ABS 2015 Bedienungsanleitung