Cannondale Topstone Neo 5 Bedienungsanleitung

Topstone Neo 5

Quick Start Guide

Applies to: Topstone Neo 5

Welcome to the Cannondale family.

WARNING

SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK

This is a Quick Start Guide, not an

Owner’s manual.

Bicycling is an active sport with

inherent risk. A wide range of injuries

are possible. Due to the nature of

bicycle riding, the situations you

encounter while riding, you will be

exposed to the risk of serious injury,

paralysis or death. This risk cannot

be eliminated. You can minimize

the risk in many ways. Begin by

reading the complete Charge Bicycle

Owner’s manual accompanying

this bike and available online at

www.chargebikes.com, particularly

section “IMPORTANT SAFETY

INFORMATION”.

First up, thank you for buying a new Cannondale bike – we’re excited to

have you on board and to get you out riding as soon as possible. Our new

assembly process is easy-to-follow – using methods outlined in this guide

to assemble your new Cannondale at home, plus it’s even easier to do so

with a friend. Our guide will take you through the simple steps from start

to nish – you can also follow along with a how-to video, as you build your

bike, just visit: [email protected]

If you still have any questions, then our Cannondale rider support sta are

ready to help you. Feel free to give us a call at

Also, when your new bike is all assembled and ready to ride, we’d love to

check it out – please don’t forget to tag #ridecannondale in your social

media. Enjoy the ride!

SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK



Install your

handlebars



Install your

front wheel



Install your

pedals





This video applies to one Cannondale Platform:

• Topstone Neo 5

Tools Needed:

• Flat-Head Screwdriver

• Phillips-Head Screwdriver

• Box Cutter

• Scissors

Tools Included:

• Torque Wrench

• Allen Keys

• Pedal Wrench

Gently lift your bike out of the box and set

it on top of the box. Make sure the attached

wheel is facing upwards

Use a at head screwdriver to carefully open the upper ap of the

box.

Prior to assembling your bike, review the pre-ride checklist and

Assembly Instruction Guide.

Conrm that a builder has completed the checklist.

Carefully lift the bike out of the box and set it onto the top of the box.

Remove the front wheel from the bike by carefully removing the zip

ties or Velcro, then remove all packaging from the wheel and set it

aside.

Remove all additional packaging from the bike.





SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK

Lift the entire bike up o the box and set the

rear end into the standing box.

The front fork should rest over the edge of the

box.



Gently let the handlebar hang from the frame. Carefully lift and rotate

the bike, lowering it gentlyback into the boxwiththefork overhanging

the side of the box.

Inside the small box, you’ll nd parts essential for assembly, necessary

tools, component documentation and manuals.

Once the bike is assembled, but before you ride, please read the

owner’s manual.

Locate and remove the warrantycard and set it aside withthe owner’s

manual.

SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK

 A

Using the included hex wrench, loosen and remove the bolts and

faceplate from the stem. The stem connects the handlebar to the

fork. Set the bolts and faceplate aside together, so you don’t lose

anything.

Place the handlebar into the stem and verify the brake hoses and

shift cables wrap around the frame cleanly, without visible kinks in

the lines.

Loosely reattach the faceplate to the stem. Take care to not tighten

one bolt more than another. The goal is a consistent gap between the

stem and faceplate.

Center the handlebar in the stem using the markings on the bar, then

roll the bars back into a comfortable position.

Hand-tighten the stem bolts using the 4mm hex wrench, ensuring

there’s an even gap between the stem body and faceplate at both

the top and bottom of the stem. You will fully tighten these later.





SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK



Unthread the thru-axle from the fork and place it on a clean surface.

Remove the front brake pad spacer from the brake caliper.

Carefully lift the bike out of the box and lower the fork gently onto the

ground.

Remove the e-bike charger from the larger bicycle box and set it

aside. We’ll get back to it later.



SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK



When installing the front wheel, ensure the brake rotor is on the same

side as the brake caliper on the fork.

Lift the front of the bike and roll the front wheel backward into the

fork dropouts, making sure the rotor goes in-between the brake pads.

Insert the thru-axle from the right side and tighten rmly with a 6mm

hex wrench. The wrench should leave a distinct imprint on your hand.

Remove any additional packaging from the rear of the bicycle.

SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK



Pedals are left- and right-specic. Locate the left and right markings

on the pedal spindles prior to installation.

Locate the bag of grease and carefully insert the threaded portion of

the pedal spindle into the bag.

Insert the right pedal (marked with R) into the right/drive side crank

arm and tighten with your ngers. Repeat with the left pedal (with an

L on it). Please note: Both pedals tighten in the direction of the front

wheel.

Tighten both pedals down very rmly.



SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK

 A

Adjust seat height by loosening the seatpost collar.

Standing next to the bike, position the saddle so it’s the same height

as your hip.

Align the saddle with the frame and tighten the seatpost clamp

When riding, you should have a slight bend in your knee when the

pedal is at the bottom of its rotation.

 Select the correct bit for the stem bolts and install it

into the torque wrench.

Look for the torque specication markings on the front and back

of the stem, as well as the seatpost. If these markings are absent,

torque all stem, seatpost and seat clamp bolts to 7 Nm.

Tighten stem bolts in an ‘X’ pattern and ensure the gap is even

between the stem and faceplate at all four bolts.





SET-UP STEP 2STEP 1 STEP 3 PRE-RIDE CHECK

Andere Cannondale Fahrrad Handbücher

Cannondale

Cannondale Synapse Carbon Konfigurationshandbuch

Cannondale

Cannondale Rush 29 Bedienungsanleitung

Cannondale

Cannondale Mountain Hardtail Thru Axle Bedienungsanleitung

Cannondale

Cannondale Slice Bedienungsanleitung

Cannondale

Cannondale SuperSix EVO CX Konfigurationshandbuch

Cannondale

Cannondale Adventure Neo Allroad 2023 Konfigurationshandbuch

Cannondale

Cannondale PROPHET Bedienungsanleitung

Cannondale

Cannondale Alloy Road Disc Bedienungsanleitung

Cannondale

Cannondale Kids with Training Wheels Bedienungsanleitung

Cannondale

Cannondale Mavaro Neo Konfigurationshandbuch

Cannondale

Cannondale en 14764 Bedienungsanleitung

Cannondale

Cannondale Topstone Neo Lefty Bedienungsanleitung

Cannondale

Cannondale F-SI Bedienungsanleitung

Cannondale

Cannondale SuperSix EVO Bedienungsanleitung

Cannondale

Cannondale Trigger 2019 Konfigurationshandbuch

Cannondale

Cannondale Adventure Neo Konfigurationshandbuch

Cannondale

Cannondale Tesoro Neo X Speed Konfigurationshandbuch

Cannondale

Cannondale Lefty Ocho 120 Konfigurationshandbuch

Cannondale

Cannondale Lefty MAX Bedienungsanleitung

Cannondale

Cannondale Full-Suspension EBike Bedienungsanleitung

Cannondale

Cannondale Quick Neo SL w/ Ebikemotion X35 Drive System... Handbuch

Cannondale

Cannondale Jekyll Konfigurationshandbuch

Cannondale

Cannondale CY22 Moterra Neo Konfigurationshandbuch

Cannondale

Cannondale CONTRO-E CM2491SM01 Bedienungsanleitung

Beliebte Fahrrad Handbücher anderer Marken

RAMBO

RAMBO R1000X2M-FF-BFD Bedienungsanleitung

Vermeiren

Vermeiren SAFARI Bedienungsanleitung

Velec

Velec A2/36V Bedienungsanleitung

Coswheel

Coswheel A-ONE Bedienungsanleitung

Betzold

Betzold 97869 Bedienungsanleitung

Cervélo

Cervélo S3 2019 Bedienungsanleitung

Tenways

Tenways AGO X Bedienungsanleitung

Festo

Festo EGSC-BS-KF Stücklistenhandbuch

Gio Electric

Gio Electric H1 Volt Bedienungsanleitung

GOGOBEST

GOGOBEST GM30 Bedienungsanleitung

DAHON

DAHON CIAO - 2009 Bedienungsanleitung

Aprimatic

Aprimatic ONDA 500 Kurzanleitung

MV Agusta

MV Agusta Lucky Explorer GRAVEL Gebrauchsanweisung

Greyp

Greyp G6 Series Bedienungsanleitung

Babboe

Babboe Carve-E Bedienungsanleitung

Huka

Huka orthros Bedienungsanleitung

Xtracycle

Xtracycle Stoker 2021 Bedienungsanleitung

APRILIA

APRILIA DORSODURO 750 ABS 2015 Bedienungsanleitung