Canon PIXMA MP500 Bedienungsanleitung
Quick Start Guide
Table of Contents
Introduction 15
Document Handling 20
Paper Handling 21
Copying 27
Printing from a Memory Card 29
Printing Photographs Directly from a Compliant Device 34
Maintenance 35
QT7-0106-V02
BE
2
Preparing the machine
Unpack the machine
Please confirm bundled items against the illustration printed on the lid of the packing box.
IMPORTANT
• Do not connect the USB cable until after the software is installed.
• A printer cable is not included. You must purchase a USB cable (less than 10 ft. / 3 m) to connect your
machine to a computer.
1Turn on the machine.
• The language setting is only available for some countries.
• If you have an undesired language selection, refer to the User’s Guide.
2Install the Print Head.
• If the Scanning Unit (Printer Cover) is left open for more than 10 minutes, the Print Head Holder moves
to the right. Close and reopen the Scanning Unit (Printer Cover) to return the Holder to the center.
• There might be some transparent or light blue ink on the inside of the bag the print head comes in - this
has no effect on print quality. Be careful not to get ink on yourself when handling these items.
• Do not reattach the protective cap once you have removed it.
3Install the ink tanks.
• Ensure that all the ink tanks are installed in the order directed by the label. The machine cannot be used
unless all the ink tanks are installed.
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
• Be sure to remove the clear film from the ink tank in the exact order as shown in step 3.
• Do not reattach the protective cap once you have removed it.
• The Alarm Lamp still lights orange if an ink tank is not installed properly. Open the Scanning Unit
(Printer Cover) and make sure that all the ink tanks are installed in the correct order directed on the label.
4Align the Print Head from the Operation Panel.
Execute automatic Print Head alignment to keep high print quality.
• When executing automatic Print Head alignment, always load paper in the Auto Sheet Feeder. You can
load paper in both the Auto Sheet Feeder and Cassette when printing. For details, refer to the User's
Guide.
• If the automatic Print Head alignment screen is not displayed, see “Aligning the Print Head
Automatically” on page 38.
• When the Print Head position pattern is printed, Print Head alignment is complete.
3
Install the software
Select Easy Install in order to install the application software, On-screen Manual and MP drivers. Select
Custom Install in order to choose the options you would like to install.
IMPORTANT
• Temporarily close any open applications, including anti-virus software. Computer security programs
can be re-started after software installation.
Installing the Printer Driver - Windows
• If you have an earlier version of the MultiPASS Suite software installed on your computer, uninstall this
version before installing the new version. For instructions on uninstallation, refer to the guides for that
version of MultiPASS Suite.
• You must log on as an administrator or have administrative privileges in order to install the software in
Windows XP or Windows 2000.
• Do not switch users during the installation process.
• If the following screen appears, the USB cable is connected.
Perform the following steps.
1. Press [ON/OFF] to turn off the machine.
2. Disconnect the USB cable.
3. Click [Cancel].
Installing the Printer Driver - Macintosh
• Do not connect the machine to Mac OS 9 or Mac OS X Classic environments since they are not
supported.
• Enter the name and password for an Administrator Account if required.
Perform the following to make sure the driver has been installed correctly
1. Select [Applications] from the [Go] menu.
2. Double-click the [Utilities] folder, then the [Printer Setup Utility] ([Print Center] when using Mac OS
X v.10.2.x) icon.
If the printer is displayed in the [Printer List], the printer driver is installed.
If the printer is not displayed in the [Printer List], click [Add] in the [Printer List] and select [USB]
from the pop-up menu. Select [MP500] from the [Product] list and click [Add].
When connecting from Mac OS X v.10.3.3 or earlier:
Restarting the computer while connected to the machine may cause the machine not to be detected. To
resolve this, either unplug the USB cable then plug it back in again, or turn the machine OFF then back
ON again.
4
Canon MP500 Quick Start Guide
Copyright
This manual is copyrighted by Canon Inc. with all rights reserved.
Under the copyright laws, this manual may not be reproduced in any form, in whole or in
part, without the prior written consent of Canon Inc.
© 2005 Canon Inc.
Disclaimer
Canon Inc. has reviewed this manual thoroughly in order that it will be an easy-to-use
guide to your Canon MP500 Series. All statements, technical information and
recommendations in this manual and in any guides or related documents are believed
reliable, but the accuracy and completeness thereof are not guaranteed or warranted, and
they are not intended to be, nor should they be understood to be, representation or
warranties concerning the products described.
Specifications are subject to change without notice.
As an ENERGY STAR partner, Canon Inc., has determined that
this product meets the ENERGY STAR guidelines for energy
efficiency.
All information regarding non-Canon products was compiled from publicly available
information. No representation is made regarding the accuracy thereof.
This machine supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication
between digital cameras and printers.
By connecting to an Exif Print-compliant digital camera, the
camera’s image data at the time of shooting is used and
optimized, yielding extremely high quality prints.
5
Model Name
K10264 (PIXMA MP500)
Trademarks
• “Windows” is a trademark of Microsoft Corporation, registered in the United States
and other countries.
• “Macintosh” and “Mac” are trademarks of Apple Computer, Inc., registered in the U.S.
and other countries.
• “CompactFlash” is a trademark of SanDisk Corporation.
• “Microdrive” is a trademark of International Business Machines Corporation.
• “xD-Picture Card” is a trademark of Fuji Photo Film Co., Ltd.
• “SmartMedia” is a trademark of Toshiba Corporation.
• “MEMORY STICK”, “Memory Stick PRO”, “MEMORY STICK Duo” and “Memory
Stick Pro Duo” are trademarks of Sony Corporation.
• “SD card” and “miniSD Card” are trademarks of SD Association.
• “MultiMediaCard” is a trademark of Infineon Technologies AG.
• “IrDA Feature Trademark” is owned by the Infrared Data Association and used under
license therefrom.
• “Bluetooth” is a trademark of Bluetooth SIG, Inc.,U.S.A. and are licensed to Canon
Inc.
• All other product and brand names are trademarks of their respective owners.
• Specifications are subject to change without notice.
6
XHow to Use the Documentation Provided
Easy Setup Instructions (Printed documentation):
Be sure to read this sheet first.
This sheet includes instructions for setting up your machine and getting it ready for use.
On-screen Manuals
User’s Guide
Read this guide when starting to use the machine.
After following instructions in the Easy Setup Instructions, read this guide for instructions
on printing from your computer, direct photo printing from selected digital cameras,
copying, and scanning.
Refer to these guides as needed for full instructions on some of the more advanced
features.
Scan Guide
Refer to this guide for full instructions on scanning operation and settings.
Printer Driver Guide
Refer to this guide for full instructions on setting the printer driver.
Photo Application Guide
Refer to this guide for instructions on using various application software included on the
Setup CD-ROM.
7
XHow to Read the On-screen Manuals
The on-screen manuals are manuals to be viewed on your computer.
Read these manuals for detailed information on usage of the machine that is not
mentioned in this document, troubleshooting, or usage of the application softwares
supplied with the Setup CD-ROM, etc.
You can install the on-screen manuals using the Setup CD-ROM by either of the
following.
• Select “Easy Install” to install the on-screen manuals along with the MP driver and
application softwares.
• Select “On-screen Manual” from “Custom Install” to install the on-screen manuals.
If you have not installed or have deleted the on-screen manuals, use either method above
to install them.
For Windows:
• Browser: Windows HTML Help Viewer
• Note: Microsoft Internet Explorer 5.0 or later must be installed.
• The on-screen manual may not be displayed properly depending on your operating
system or Internet Explorer version. We recommend that you keep your system up to
date with Windows Update.
For Macintosh:
• Browser: Help Viewer
• Note: The on-screen manual may not be displayed properly depending on your
operating system. We recommend that you keep your system up to date.
8
XReading the Document
Symbols Used in This Guide
Buttons Used in This Guide
WARNING Indicates a warning concerning operations that may lead to death or
injury to persons if not performed correctly. In order to use the machine
safely, always pay attention to these warnings.
CAUTION Indicates a caution concerning operations that may lead to injury to
persons or damage to property if not performed correctly. In order to use
the machine safely, always pay attention to these cautions.
IMPORTANT Indicates operational warnings and restrictions. Be certain to read these
items to operate the machine correctly and to avoid damage to the
machine.
Indicates notes for operation or additional explanations. Reading these is
highly recommended.
1. (Operation branch-step) Used to explain each operation of a branch procedure.
[button name] Text enclosed in these brackets indicates a button on the Operation Panel of the
machine or an item on the computer to be manipulated.
Example: [Color]
<message> Text enclosed in these brackets indicates a message or selectable menu item
which appears on the LCD (Liquid Crystal Display).
Example: <PHOTO PAPER PRO>,<OFF>
9
Terms Used in This Guide
XSelecting the Language for the LCD
1Press [Menu].
2Use [W] or [X] to select <Maintenance/settings>, then press [OK].
3Use [W] or [X] to select <Device settings>, then press [OK].
4Use [S] or [T] to select <Language selection>, then press [OK].
5Use [S] or [T] to select the language, then press [OK].
machine General term used to represent MP500.
default A setting that remains in effect unless you change it.
documents The original sheets of paper, pages of a book, or photographs you copy, or scan
with the machine.
paper Paper on which you can print with the machine.
menu A list of settings from which you select an item to set up or change. A menu has
a title which appears on the LCD.
10
XSafety Precautions
Please read the safety warnings and cautions provided in this guide to ensure that you use
your machine safely. Do not attempt to use the machine in any way not described in this
guide. For detailed safety information, refer to the User’s Guide.
WARNING
You may cause an electric shock/fire or damage the machine if you ignore any of
these safety precautions.
zLocation
• Do not place the machine close to flammable solvents such as alcohol or thinners.
zPower supply
• Never attempt to plug or unplug the machine from the power supply when your hands
are wet.
• Always push the plug all the way into the power outlet.
• Never damage, modify, stretch or excessively bend or twist the power cord. Do not
place heavy objects on the power cord.
• Never plug the machine into a power socket that is shared with other equipment
(extension lead/cord, 2- or 3-way adapter, etc.).
• Never use the machine if the power cord is bundled or knotted.
• If you detect smoke, unusual smells or strange noises around the machine, immediately
unplug the machine at the power supply and contact your local authorized Canon dealer
or the Canon help line.
Using the machine in such conditions may result in fire or electrical shock.
• Periodically, unplug the machine and use a dry cloth to wipe off any dust or dirt
collected on the plug and the power outlet.
If the machine is placed at a location exposed to a lot of dust, smoke, or high humidity,
the dust collected on the plug absorbs moisture and may cause insulation failure and
fire.
Andere Handbücher für PIXMA MP500
7
Inhaltsverzeichnis
Andere Canon Multifunktionsdrucker Handbücher
Canon
Canon PIXMA MP500 Bedienungsanleitung
Canon
Canon PIXMA MG3220 series Bedienungsanleitung
Canon
Canon MX720 Series Einrichtungshandbuch
Canon
Canon ColorPASS-GX400 Montage- und Wartungsanleitung
Canon
Canon MultiPASS F50 Montage- und Wartungsanleitung
Canon
Canon IR5000 - iR B/W Laser Anleitung zur Verwendung
Canon
Canon 5119B001AA Montageanleitung
Canon
Canon imageRUNNER 3530 Bedienungsanleitung
Canon
Canon MultiPASS C555 Bedienungsanleitung
Canon
Canon imageRUNNER ADVANCE C9280 PRO Bedienungsanleitung
Canon
Canon ImageCLASS 2300 Bedienungsanleitung
Canon
Canon IR3250 Montage- und Wartungsanleitung
Canon
Canon imageCLASS D660 Handbuch
Canon
Canon PIXMA MP130 Bedienungsanleitung
Canon
Canon MultiPASS L60 Sicherheitsleitfaden
Canon
Canon ImageRunner C2550 Bedienungsanleitung
Canon
Canon PIXMA MP990 Montage- und Wartungsanleitung
Canon
Canon 2235B001AA Bedienungsanleitung
Canon
Canon PIXMA MP228 Bedienungsanleitung
Canon
Canon 3300B002 Bedienungsanleitung
Beliebte Multifunktionsdrucker Handbücher anderer Marken
Triumph Adler
Triumph Adler DC 2016 Handbuch
Epson
Epson WorkForce WF-2510 Benutzerhandbuch
Epson
Epson Stylus Scan 2000 Installations- und Betriebshandbuch
Epson
Epson PictureMate Snap PM 240 Bedienungsanleitung
Konica Minolta
Konica Minolta bizhub C35 Bedienungsanleitung
Brother
Brother MFC-J430w Bedienungsanleitung
