Canon PIXMA MP990 Montage- und Wartungsanleitung

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Windows OS

<< Previous Next >>

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990 / PIXMA MP640 / PIXMA MP560

Windows OS

Preparing to Connect My Multifunction to My Network 3

Network Requirements 3

Important Information You Need Before Adding Your Multifunction 4

Adding Your Multifunction to the Network 5

Confirm Connection Status 9

Downloading & Installing the Drivers 12

Downloading the Driver 12

Installing the Driver 15

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer and access point or router is

complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security settings of the network device vary depending on your

system environment. For details, refer to your device's instruction manual or contact its manufacturer.

•The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection.

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Preparing to Connect My Multifunction

To My Network << Previous Next >>

Be sure to prepare an access point.

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or WPA/WPA2 passphrase, Pre-Shared key.

A password is required to prevent unauthorized access to communication.

Check your access point or router for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access point or router, or contact its manufacturer.

An "Ad-hoc connection," which establishes a direct

connection to the computer over a wireless connection

without using an access point, is not supported.

Adding Your Multifunction to Your Network << Previous Next >>

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and

then press the OK button.

*Easy-Scroll Wheel location varies according to model.

MP640 pictured in examples below.

Step Two

Select Device settings, then press the OK button.

Adding Your Multifunction to Your Network << Previous Next >>

Step Four

Select Change wireless / wired, then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the Wi-Fi lamp**

(B) lights blue.

**Wi-Fi lamp location varies according to model.

Step SIx

When one of the following screens is displayed, enter the network

key you wrote down, then press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character. Use the button

to move the cursor to the right.

IMPORTANT: Enter upper and lower case letters of the alphabet

correctly.

Adding Your Multifunction to Your Network << Previous Next >>

Step Five

Select the access point name you wrote down,

then press the OK button.

NOTE: If you are living in an apartment, nearby access

points in use may be detected.

Adding Your Multifunction to Your Network << Previous Next >>

Step Eight

When the completion screen appears, press the OK button, then

press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

NOTE: If Failed to connect to the access point. appears, press the OK

button, make sure that the network key is correct, then enter it again. If a

connection still cannot be established, refer to the printed manual: Network

Setup Troubleshooting.

Step Seven

Make sure that the network key is correct, and

then press the OK button.

Step One

Press the HOME*** button (A), select Settings using the

Easy-Scroll Wheel (B), and then press the OK button.

***HOME button location varies depending on model.

IMPORTANT: Confirm connection status after installing

the machine in the target location.

Adding Your Multifunction to Your Network << Previous Next >>

Confirm Connection Status

Step Two

Select Device settings, and then press the OK button.

Adding Your Multifunction to Your Network << Previous Next >>

Step Three

Select LAN settings, and then press the OK button.

Step Four

Select Confirm LAN settings, then press the OK button.

Andere Handbücher für PIXMA MP990

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon iR2020 Series Produktinformationsblatt

Canon

Canon MX330 series Gebrauchsanweisung

Canon

Canon imageRUNNER ADVANCE 8105 Bedienungsanleitung

Canon

Canon PIXMA MP780 Bedienungsanleitung

Canon

Canon PIXMA MG6220 Installing Bedienungsanleitung

Canon

Canon MultiPass C560 Handbuch

Canon

Canon PIXMA MX870 Series Bedienungsanleitung

Canon

Canon MF5750 - ImageCLASS B/W Laser Bedienungsanleitung

Canon

Canon 4788B018 Bedienungsanleitung

Canon

Canon ImageCLASS MF4270 Sicherheitsleitfaden

Canon

Canon MultiPASS C530 Kurzanleitung

Canon

Canon MultiPASS C545 Bedienungsanleitung

Canon

Canon MultiPASS F60 Benutzerhandbuch

Canon

Canon MX450 series Einrichtungshandbuch

Canon

Canon iR2022 Produktinformationsblatt

Canon

Canon imageRUNNER 3300E Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C7270 Montageanleitung

Canon

Canon CLC 3900+ Bedienungsanleitung

Canon

Canon iP2600 - PIXMA Color Inkjet Printer Bedienungsanleitung

Canon

Canon imageCLASS D550 Montageanleitung

Canon

Canon 3747B003 Bedienungsanleitung

Canon

Canon imageRUNNER C3480 Produktinformationsblatt

Canon

Canon imageRUNNER Advance C2030i Montageanleitung

Canon

Canon MX450 series Einrichtungshandbuch

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung