Canon PIXMA MP990 Bedienungsanleitung

Installing Your Multifunction

to Your Network for the First Time

PIXMA MP990

PIXMA MP640 / PIXMA MP560

Macintosh OS

Preparing to Connect My Multifunction to My Network ..............................................................2

Network Requirements ..........................................................................................................2

Important Information You Need Before Adding Your Multifunction ....................................... 3

Adding Your Multifunction to Your Network ............................................................................... 3

Confirm Connection Status .................................................................................................... 6

Downloading & Installing the Drivers ......................................................................................... 8

Download the Driver ..............................................................................................................8

Installing the Driver .............................................................................................................. 10

Add the Machine ..................................................................................................................17

Page 2

Preparing to Connect My Multifunction to My Network

Network Requirements

Before connecting the machine to the network, make sure that configuration of the computer

and access point or router is complete, and that the computer is connected to the network.

Notes on Network Connection

•The configuration, router functions, setup procedures and security setting s of the

network device vary depending on your system environment For detail Is, refer to your

device's instruction manual or contact its manufacturer.

• The machine cannot be used over a wireless and wired connection at the same time.

Wireless Connection

Connect to your network environment over a wireless connection

Page 3

An "Ad-hoc connection," which establishes a direct connection to the computer over a wireless

connection without using an access point, is not supported.

Be sure to prepare an access point

Important Information You Need Before Adding Your Multifunction

The following information is required to connect to your access point or router.

•Access Point Name/Network Name:

Also referred to as SSID. A name to identify the specific access point.

•Network Key:

Also referred to as encryption key, WEP key or VVPANVPA2 passphrase, Pre-Shared

key.

A password required to set to prevent unauthorized access to communication.

Check your access point or route for the following information, and then write it down.

NOTE: For details on how to check the following information, refer to the manual of your access

point or router, or contact its manufacturer.

Adding Your Multifunction to Your Network

Step One

Use the Easy-Scroll Wheel* (A) to select Settings, and then press the OK button.

*Easy-Scroll Wheel location varies according to model MP640 pictured in examples below.

Page 4

Step Two

Select Device settings, then press the OK button.

Step Three

Select Yes, then press the OK button.

When wireless connection is enabled, the V\Ii-Fi lamp** (B) lights blue.

**Wi-Fi lamp location varies according to model.

Step Four

Select Easy settings, and then press the OK button.

Step Five

Select the access point name you wrote down, then press the OK button.

Page 5

NOTE If you are living in an apartment, nearby access points in use may be detected.

Step Six

When one of the following screens is displayed, enter the network key you wrote down, then

press the OK button.

If the following screen is not displayed, go to Step Eight.

Use the Easy-Scroll Wheel to select the character Use the button to move the cursor to the

right.

IMPORTANT: Enter upper and lower case letters of the alpha bet correctly.

Step Seven

Make sure that the network key is correct, and then press the OK button.

Step Eight

When the completion screen appears, press the OK button, then press the HOME*** button (C).

***HOME button location varies depending on model.

The standby screen returns.

Page 6

Note:

If Failed to connect to the access point appears, press the OK button, make sure that the

network key is correct, then enter it again. If a connection still cannot be established, refer to

the printed manual: Network Setup Troubleshooting.

Confirm Connection Status

Step One

Press the HOME*** button (A), select Settings using the Easy-Scroll Wheel (B), and then press

the OK button.

***HOME button location varies depending on model.

IMPORTANT Confirm connection status after installing the machine in the target location.

Step Two

Select Device settings, and then press the OK button.

Step Three

Select LAN settings, and then press the OK button

Page 7

Step Four

Select Confirm LAN settings, then press the OK button.

Step Five

Select Wireless LAN setting list, then press the OK button.

Make sure that Connection is set to Active, and then press the HOME button.

It may take a while before the connection is complete In this case, press the Back* button (C)

and wait for about a minute, then display the Wireless LAN setting list screen again.

*Back button location varies depending on model.

NOTE: If the communication status does not improve, make sure of the following.

•The machine and network device are turned on.

•There is no obstacle between the machine and access point, and wireless

communication is possible.

•There is no microwave, refrigerator or any other object that may cause radio interference

nearby.

Page 8

Downloading & Installing the Drivers

Download the Driver

To use the machine by connecting it to a computer, software including the drivers needs to be

copied (installed) to the computer's hard disk The installation process takes about 20 minutes

(The installation time varies depending on the computer environment or the number of

applications to be installed.)

Step One

Go to the Canon Canada Support Home Page

Click here to go

to the Canon Canada Support Home Page

Step Two

Select Consumer & Home Office in the Product Type menu dropdown, All-In-One Printer in

the Product Family, PIXMA MP Series in the Product Series and click on the Drivers &

Software link for your model.

Step Three

In the Drivers I Software Selection section, select your operating system in the Select OS

dropdown menu.

Please 5elect ,0Uf operotinv "stem to

view •••

Page 9

Step Four

In the Drivers section, click the link (red printing) for the MP Driver.

Step Five

On the next screen, read the information and instructions and click I Agree - Begin Download

Once the file has been downloaded, double-click it to begin the installation process

IMPORTANT:

•Quit all running applications before installation.

•Log on as the administrator (or a member of the Administrators group).

•Do not switch users during the installation process.

•Internet connection may be required during the installation Connection fees apply.

•It may be necessary to restart your computer during the installation process. Follow the

on-screen instructions. The installation resumes once your computer has restarted.

•If the firewall function of your security software is turned on, a warning message may

appear that Canon software is attempting to access the network. If such a warning

message appears, set the security software to always allow access.

Page 10

Installing The Driver

Step One

Double-click the Setup icon

Step Two

If the following message appears, click Open

Andere Handbücher für PIXMA MP990

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon imageRunner 2204F Bedienungsanleitung

Canon

Canon LASER CLASS 730i Bedienungsanleitung

Canon

Canon iR1022 Bedienungsanleitung

Canon

Canon PIXMA MG2150 Bedienungsanleitung

Canon

Canon iR6570 series Bedienungsanleitung

Canon

Canon IMAGERUNNER 2020 Bedienungsanleitung

Canon

Canon PIXMA MG3120 Bedienungsanleitung

Canon

Canon MultiPASS C20 Bedienungsanleitung

Canon

Canon imageRUNNER 5075 Bedienungsanleitung

Canon

Canon imagePRESS C800 Series Bedienungsanleitung

Canon

Canon PIXMA MX700 Series Bedienungsanleitung

Canon

Canon MP560 - PIXMA Color Inkjet Bedienungsanleitung

Canon

Canon LaserBase MF3200 Series Benutzerhandbuch

Canon

Canon imageCLASS MF5950dw Sicherheitsleitfaden

Canon

Canon ImageCLASS MF3240 Series Benutzerhandbuch

Canon

Canon imageCLASS MF4140 Sicherheitsleitfaden

Canon

Canon PIXMA MG2920 Bedienungsanleitung

Canon

Canon imageCLASS D550 Sicherheitsleitfaden

Canon

Canon PIXMA MX925 Series Bedienungsanleitung

Canon

Canon PIXMA MX860 series Bedienungsanleitung

Canon

Canon imageCLASS MF4580dn Sicherheitsleitfaden

Canon

Canon PIXMA MX452 Bedienungsanleitung

Canon

Canon PIXMA MX725 Series Bedienungsanleitung

Canon

Canon ImageCLASS MF4570dw Sicherheitsleitfaden

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung