Canon PIXMA MX860 series Bedienungsanleitung

MX860 / MX868

Service Manual

Revision 0

COPYRIGHTc2009CANONINC.CANONMX860012009XX0.00-0



Scope

This manual has been issued by Canon Inc., to provide the service technicians of this product with the information

necessary for qualified persons to learn technical theory, installation, maintenance, and repair of products. The manual

covers information applicable in all regions where the product is sold. For this reason, it may contain information that is

not applicable to your region.

This manual does not provide sufficient information for disassembly and reassembly procedures.

Refer to the graphics in the separate Parts Catalog.

Revision

This manual could include technical inaccuracies or typographical errors due to improvements or changes made to the

product. When changes are made to the contents of the manual, Canon will release technical information when necessary.

When substantial changes are made to the contents of the manual, Canon will issue a revised edition.

The following do not apply if they do not conform to the laws and regulations of the region where the manual or product is

used:

Trademarks

Product and brand names appearing in this manual are registered trademarks or trademarks of the respective holders.

language without the written permission of Canon Inc., except in the case of internal business use.

CANON INC.

Inkjet Device Market Support Management Div.

451, Tsukagoshi 3-chome, Saiwai-ku, Kawasaki-shi, Kanagawa 212-8530, Japan

TABLE OF CONTENTS

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement

Consumables by Service Engineer

1-2. Customer Maintenance

1-3. Special Tools

1-4. Sensors

1-5. Serial Number Location

2. LIST OF ERROR DISPLAY / INDICATION

2-1. Operator Call Errors

2-2. Service Call Errors

2-3. FAX Errors

2-4. Troubleshooting by Symptom

3. REPAIR

3-1. Major Replacement Parts

3-2. Part Replacement Procedures

(1) External housing, scanner unit, and document cover removal

(2) Operation panel and document feed unit removal

(3) Printer unit removal, and ink absorber replacement

(4) Carriage unlocking

(5) ASF unit removal

(6) Carriage unit removal

(7) Spur unit and platen unit removal

(8) Purge drive system unit (right plate) and switch system unit (left plate) removal

MX860 / MX868

4. ADJUSTMENT / SETTINGS

4-1. User Mode

4-2. Service Mode

(1) Service mode operation procedures

(2) Service Tool functions

(3) LF / Eject correction

(4) Button and LCD test

(5) Ink absorber counter setting

4-3. PTT Parameter Mode

4-4. Grease Application

4-5. Special Notes on Servicing

(1) Print head problem

(2) Paper feed motor adjustment

(3) Carriage unit replacement

(4) Document pressure sheet (sponge sheet) replacement

(5) Ink absorber counter setting

(6) Power supply unit and modular board replacement

(7) Rating label on the bottom case (for the models other than Japan)

(8) PTT label on the bottom case (for New Zealand only)

(9) NAL label on the bottom case (for China only)

4-6. Verification After Repair

(1) Standard inspection flow

(2) Service test print

(3) Ink absorber counter value print

5. MACHINE TRANSPORTATION

1. MAINTENANCE

1-1. Adjustment, Periodic Maintenance, Periodic Replacement Parts, and Replacement

Consumables by Service Engineer

(1) Adjustment

MX860 / MX868 TABLE OF CONTENTS

Adjustment Timing Purpose Tool Approx.

time

EEPROM

initialization - At logic board replacement To initialize settings Service Tool*1

Perform in the service

mode.

1 min.

Destination

settings

(EEPROM

settings)

- At logic board replacement To set destination. Service Tool*1

Perform in the service

mode.

1 min.

Ink absorber

counter resetting

(EEPROM

settings)

- At logic board replacement

- At ink absorber replacement To reset the ink absorber

counter. Service Tool*1

Perform in the service

mode.

1 min.

Ink absorber

counter value

setting

(EEPROM

settings)

- At logic board replacement To set the ink amount data in

the ink absorber to the ink

absorber counter.

Service Tool*1

Perform in the service

mode.

1 min.

Ink absorber

replacement - When the ink absorber

becomes full To replace the ink absorber

with a new one. Screwdriver, a pair of

tweezers, etc. 15 min.

Paper feed motor

position

adjustment

- At paper feed motor

replacement To adjust the belt tension.

(Position the paper feed motor

so that the belt is stretched

tight.)

None. 5 min.

Manual print head

alignment - At print head replacement

- At logic board replacement

- When print quality is not

satisfying

To secure the dot placement

accuracy. None.

Perform in the user

mode.

10 min.

Grease application - At carriage unit replacement To maintain sliding properties

of the carriage rail. FLOIL KG-107A 1 min.

Ink system

function check - At logic board replacement

- At spur unit replacement

- At carriage unit replacement

To maintain detection

functionality for presence of

the ink tanks and each ink tank

position.

Service Tool*1

Perform in the service

mode.

1 min.

LCD language

settings - At logic board replacement To set the language to be

displayed on the LCD. None.

Perform in the user

mode.

1 min.

Platen glass

protection sheet

(document

pressure sheet)

position

adjustment

- At protection sheet

replacement

- At document bottom cover

replacement

- At scanner unit replacement

To maintain scanning

accuracy, hold the sheet with

the long side down, then fit its

upper left corner to the platen

glass reference mark (back

left).

None. 1 min.

LF / Eject - At logic board replacement To correct line feeding (LF Service Tool*1 5 min.

1 / 64

N: New adjustment item

*1: Install the Service Tool version 1.030 or later to a pre-registered computer.

(2) Periodic maintenance

No periodic maintenance is necessary.

(3) Periodic replacement parts

There are no parts in this machine that require periodic replacement by a service engineer.

(4) Replacement consumables

There are no consumables that require replacement by a service engineer.

correction - At paper feed roller

replacement roller diameter). Perform in the service

mode. (LF

correction

and Eject

correction

performed

at the same

time.)

- At logic board replacement

- At platen unit replacement To correct line feeding (eject

roller diameter). Service Tool*1

Perform in the service

mode.

Carriage rail

position

adjustment

- At carriage unit replacement

- At carriage unit removal To set the carriage rail to the

original position prior to

removal or replacement of the

carriage unit, put a mark on the

main chassis before removal of

the carriage unit.

None. 1 min.

LAN resetting - At logic board replacement

- At WLAN board

replacement

To initialize the network

setting. None.

Perform in the user

mode.

- Machine buttons

- Computer (IJ

Network Tool)

1 min.

Wired / Wireless

LAN setting

information

display

- At confirmation of the

network setting To confirm the network

setting. None.

Perform in the user

mode.

- Machine buttons

- Computer (IJ

Network Tool)

1 min.

NFAX user data

settings - At logic board replacement

- At modular board

replacement

To confirm the FAX user data

settings. None.

Perform in the user

mode.

2 min.

- The screws securing the paper feed motor may be loosened only at replacement of the paper feed motor

unit.

- For print head alignment, perform manual print head alignment using plain paper.

2 / 64

1-2. Customer Maintenance

Adjustment Timing Purpose Tool Approx.

time

Manual print head

alignment - At print head replacement

- When print quality is not satisfying

(uneven printing, etc.)

To ensure accurate dot

placement. - Machine

buttons

- Computer

(MP driver)

10 min.

Print head cleaning When print quality is not satisfying. To improve nozzle

conditions. - Machine

buttons

- Computer

(MP driver)

1 min.

Print head deep

cleaning When print quality is not satisfying, and

not improved by print head cleaning. To improve nozzle

conditions. - Machine

buttons

- Computer

(MP driver)

2 min.

Ink tank replacement When an ink tank becomes empty. ("No

ink error" displayed on the monitor or on

the machine LCD, or short flashing of an

ink tank LED)

To replace the empty ink

tank. --- 1 min.

Paper feed roller

cleaning - When paper does not feed properly.

- When the front side of the paper is

smeared.

To clean the paper feed

rollers of the selected paper

source (rear tray or

cassette).

- Machine

buttons

- Computer

(MP driver)

2 min.

Bottom plate cleaning When the back side of the paper is

smeared. To clean the platen ribs.

(Feed the paper from the

rear tray.)

- Machine

buttons

- Computer

(MP driver)

1 min.

Scanning area

cleaning When the platen glass or document

pressure sheet is dirty. To clean the platen glass

and pressure sheet. Soft, dry, and

clean lint-free

cloth.

1 min.

Exterior cleaning When necessary To clean the machine

exterior, or to wipe off

dusts.

Soft, dry, and

clean lint-free

cloth.

1 min.

LAN resetting When changing the network setting, etc. To return the LAN setting to

its original state. - Machine

buttons

- Computer (IJ

Network

Tool)

1 min.

Wired / Wireless

LAN setting

information display

When changing the network setting, etc. To confirm the LAN setting

information. - Machine

buttons

- Host

computer (IJ

Network

Tool)

1 min.

FAX user data

settings When changing the telephone line type,

etc. To confirm the FAX user

data settings. - Machine

buttons 2 min.

FAX number data When the printer is repaired, etc. To confirm that the

registered FAX numbers are

retained.

- Machine

buttons 2 min.

3 / 64

1-3. Special Tools

1-4. Sensors

Name Tool No. Application Remarks

FLOIL KG-107A QY9-0057-000 To the carriage rail sliding portions. In common with the MP610, etc.

No. Sensor Function Possible problems

1DES sensor Detects paper ejection from the ADF. - Paper jam in the ADF

2DS sensor Detects paper feeding from the ADF. - No paper in the ADF

3ADF cover sensor Detects opening and closing of the

document feeder cover. - Although the document feeder cover is closed, the

machine indicates that the cover is open.

4DF open sensor Detects opening and closing of the ADF. - The machine stays in the sleep mode even when the

document cover is opened.

5SCN open sensor Detects opening and closing of the

scanning unit (cover). - The carriage does not move to the center.

6PE sensor Detects paper feeding and ejection. - No paper

- Paper jam

7ASF sensor Controls paper feeding from the rear

tray. - Paper feed problem

- ASF sensor error

8APP sensor Controls paper feeding and purging

operation. - APP sensor error

9LF encoder sensor Detects rotation of the LF encoder, and

controls its drive. - Uneven printing

- LF position error

10 Carriage encoder

sensor Detects the position of the timing slit

film, and controls printing. - Printing shifts from the correct position.

- Carriage position error

11 Temperature sensor Detects the temperature of the inside of

the machine. - Internal temperature error

12 Ink sensor Detects the position of an ink tank. - No recognition of an ink tank

- Wrong position of an ink tank

13 Valve cam sensor Controls purging operation. - Valve cam sensor error

14 Pump roller sensor Detects the position of the pump roller - Pump roller sensor error

15 Purge cam sensor Controls purging operation. - PG cam sensor error

4 / 64

5 / 64

1-5. Serial Number Location

On the inner guide over the upper portion of the spur holder (visible when the scanning unit (cover) is opened)

When the machine power is OFF. When the machine power is ON.

<1. MAINTENANCE>

6 / 64

2. LIST OF ERROR DISPLAY / INDICATION

Errors and warnings are displayed by the following ways:

1. Operator call errors are indicated by the Alarm LED lit in orange, and the error and its solution are displayed on the

LCD in text and by icon.

2. Messages during printing from a computer are displayed on the MP driver Status Monitor.

3. Error codes (the latest 10 error codes at the maximum) are printed in the "operator call/service call error record" area in

EEPROM information print

Buttons valid when an operator call error occurs:

1. ON button: To turn the machine off and on again.

2. OK button: To clear and recover from an error. In some operator call errors, the error will automatically be cleared

when the cause of the error is eliminated, and pressing the OK button may not be necessary.

3. Stop button: To cancel the job at error occurrence, and to clear the error.

2-1. Operator Call Errors (by Alarm LED Lit in Orange)

MX860 / MX868 TABLE OF CONTENTS

Error Error

code U

No. Message on the LCD Solution Parts that are likely to be

faulty

No paper in the

rear tray. [1000] --- Rear tray.

There is no paper. Load

paper and press [OK].

Confirm that the rear tray is

selected as the paper source.

Set the paper in the rear tray,

and press the OK button.

- ASF unit

- Pressure roller unit

- Switch system unit

- Paper feed motor

No paper in the

cassette. [1003] --- Cassette.

There is no paper. Load

paper and press [OK].

Confirm that the cassette is

selected as the paper source.

Set the paper in the cassette,

and press the OK button.

- Pick-up arm unit

- Pressure roller unit

- Switch system unit

- Paper feed motor

Paper jam. [1300] --- The paper is jammed.

Clear the paper and press

[OK].

Remove the jammed paper or

foreign material causing a

paper jam (paper remainings,

clips, pens, etc.), and press the

OK button.

- ASF unit

- Pick-up arm unit

- Cassette unit

- Pressure roller unit

Paper jam in the

rear guide. [1303] ---

Paper jam in the

under guide. [1304] ---

Ink may have run

out. [1600] U041 The following ink may

have run out. Replacing

the ink tank is

recommended.

Replace the applicable ink

tank, or press the OK button to

clear the error without ink tank

replacement. When the error is

cleared by pressing the OK

button, ink may run out during

printing.

- Ink tank

- Spur unit

- Logic board

Ink tank not

installed. [1660] U043 The following ink tank

cannot be recognized.

(Applicable ink tank

icon)

Install the applicable ink tank

(s) properly, and confirm that

the LED's of all the ink tanks

light red.

- Ink tank

- Carriage unit

- Logic board

Print head not

installed, or not

properly

installed.

[1401] U051 Print head is not

installed. Install the print

head.

Install the print head properly. - Print head

- Carriage unit

- Logic board

Faulty print head

ID. U052 The type of print head is

incorrect. Install the Re-set the print head. If the

error is not cleared, the print - Print head

- Logic board

7 / 64

Andere Handbücher für PIXMA MX860 series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Canon Multifunktionsdrucker Handbücher

Canon

Canon CFX-B380 IF Bedienungsanleitung

Canon

Canon MF7280 - ImageCLASS B/W Laser Bedienungsanleitung

Canon

Canon imageCLASS MF269dw Bedienungsanleitung

Canon

Canon PIXMA MP640 Bedienungsanleitung

Canon

Canon imageRUNNER 5000i Bedienungsanleitung

Canon

Canon imageRunner 2022 Bedienungsanleitung

Canon

Canon PIXMA MX340 Series Handbuch

Canon

Canon iR6570 series Bedienungsanleitung

Canon

Canon imageRUNNER C5870U Bedienungsanleitung

Canon

Canon 0860B001 Bedienungsanleitung

Canon

Canon Color imageRUNNER C2880 Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C3325i Bedienungsanleitung

Canon

Canon ImageRunner iR8500 Series Bedienungsanleitung

Canon

Canon imageRUNNER Advance C2030i Montageanleitung

Canon

Canon imageRUNNER C3170 series Bedienungsanleitung

Canon

Canon LaserBase MF3220 Series Bedienungsanleitung

Canon

Canon Color imageCLASS MF8350Cdn Sicherheitsleitfaden

Canon

Canon PIXMA MX452 Bedienungsanleitung

Canon

Canon IMAGEPRESS C7010VPS Betriebsanleitung

Canon

Canon imageRUNNER 1435i Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE C9075 PRO Bedienungsanleitung

Canon

Canon Color imageCLASS MF8180c Sicherheitsleitfaden

Canon

Canon LaserCLASS 310 Kurzanleitung

Canon

Canon image runner 2545i Bedienungsanleitung

Beliebte Multifunktionsdrucker Handbücher anderer Marken

Triumph Adler

Triumph Adler DC 2016 Handbuch

Epson

Epson WorkForce WF-2510 Benutzerhandbuch

Epson

Epson Stylus Scan 2000 Installations- und Betriebshandbuch

Epson

Epson PictureMate Snap PM 240 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub C35 Bedienungsanleitung

Brother

Brother MFC-J430w Bedienungsanleitung

Konica Minolta

Konica Minolta BIZHUB 558 Bedienungsanleitung

Lexmark

Lexmark MX710 Series Handbuch

Brother

Brother MFC-9760 Bedienungsanleitung

Lexmark

Lexmark XC8155 Bedienungsanleitung

Lexmark

Lexmark X642E Bedienungsanleitung

Sharp

Sharp MX-2310U Leitfaden

Aficio

Aficio 200 Bedienungsanleitung

Ricoh

Ricoh Pro C900 Bedienungsanleitung

Lexmark

Lexmark X925 Bedienungsanleitung

Brother

Brother Business Smart MFC-J4510dw Bedienungsanleitung

Epson

Epson Stylus CX8400 Series Bedienungsanleitung

Oce

Oce VarioLink 5022 Bedienungsanleitung