Canon BJC-2100 Series Bedienungsanleitung
BJC-2100 Series Quick Start Guide
Step 1: Unpack The Printer
1. Remove all items from the box.
• The Install Me First CD-ROM includes:
oMicrosoft ® Windows ® printer drivers
oMacintosh ® printer driver
oIS-22 Color Scanner Cartridge driver
oOnline User's Manual
oSoftware applications
oElectronic registration
2. Remove all shipping tape and materials from the unit.
• Open the front cover and remove the protective material and fixing tape from the BJ cartridge holder.
• Tape may not be in the exact locations shown here.
3. Attach the paper support and attach the paper output tray to the front of the printer.
Step 2: Plug In the Printer
The printer is turned on as long as it is plugged in. There is no power button or power light on this printer. When
not being used, the printer automatically goes into sleep mode to conserve energy.
Section 3: Load Paper
1. Move the paper guide to the left to match your paper size.
2. Insert the stack of paper with the print side up and adjust the paper guide.
Section 4: Install The BJ Cartridge
1. Open the front cover.
• The cartridge holder moves to the left.
2. Make sure the blue lock lever on the cartridge holder is raised.
3. Remove the cartridge from its package.
4. You MUST remove these protective materials:
• Orange cap
• Orange tape
5. Set the cartridge into the cartridge holder.
6. Lower the blue lock lever until it locks into place.
Important!
Before you close the front cover, write down the serial number (located inside the printer to the right of the
cartridge holder). You'll need this for product registration.
7. Close the front cover.
Section 5: Install The Printer Software
Windows® 95, Windows 98, Windows Me, and Windows NT 4.0 Users
1. Connect either a USB or parallel cable to the computer, but DO NOT connect it to the printer. (Port location
depends on computer.)
2. Turn on the computer.
3. Insert the Install Me First CD-ROM into your CD-ROM drive. Wait for your CD-ROM drive to start up.
4. When you see this screen, click Next.
If you do not see this screen, see the Installation Tips following step 5B.
5. When you see this screen, connect your interface cable to the printer.
• Connect the free end of the USB or parallel cable to the printer.
• USB Cable Users: Please wait a few minutes while your computer performs steps necessary for completing
USB installation.
6. After connecting the interface cable, click Next.
7. Continue to follow the on-screen instructions.
• Setup includes:
oCanon BJC-2100 Installation
oProduct Registration
oCanon Creative Installation
8. After installing software, you may be asked to restart your computer.
Windows 2000 Users
1. Connect either a USB or parallel cable to the computer (port location depends on computer), and then connect
it to the printer.
2. Turn on the computer.
3. The Found New Hardware Wizard screen appears. Click Next.
Note: If you do not see this screen, skip to step 8
4. When this screen appears, choose "Search for a suitable driver for my device," and click Next.
5. Click the "CD-ROM drives" checkbox; be sure to uncheck the other options. Insert the Install Me First CD-ROM
into your CD-ROM drive and wait for the drive to start up. Then click Next.
6. Once the driver is found, this screen appears. Click Next.
7. The next screen shows successful completion of this installation. Click Finish.
8. Setup starts automatically. Follow the on-screen instructions.
• Setup includes:
oCanon BJC-2100 Installation
oProduct Registration
oCanon Creative Installation
9. After installing software, you may be asked to restart your computer.
Macintosh® Users
1. Connect the USB cable to the computer and then to the printer.
2. Turn on the computer, and insert the Install Me First CD-ROM into your CD-ROM drive. The following screen
appears:
3. Click on "Install BJC-2100 Drivers." The License Agreement screen appears.
4. Read the agreement and click Agree to continue. The next screen asks you to install the printer.
5. Click on Install to continue with Easy Install. The next screen reports the progress of the driver installation.
6. After driver installation, you must reboot the system. Click the Restart button when you see the "Installation
was successful" screen.
• After rebooting, the opening screen appears, allowing you to proceed with other portions of the installation
process.
7. Once installation is complete, be sure to go to the Chooser menu (under the Apple® icon) and select the BJC-
2100 as the default printer.
Andere Handbücher für BJC-2100 Series
3
Inhaltsverzeichnis
Andere Canon Drucker Handbücher
Canon
Canon Cassette Module-Y1 Bedienungsanleitung
Canon
Canon PIXMA MG4240 Bedienungsanleitung
Canon
Canon GX7010 Bedienungsanleitung
Canon
Canon Powershot A3100 IS Handbuch
Canon
Canon i 320 Bedienungsanleitung
Canon
Canon S450 Bedienungsanleitung
Canon
Canon S 530D Bedienungsanleitung
Canon
Canon K30274 Bedienungsanleitung
Canon
Canon iP3000 - PIXMA Photo Printer Gebrauchsanweisung
Canon
Canon imageClass LBP6030w Bedienungsanleitung
Canon
Canon imagePROGRAF W8400 Bedienungsanleitung
Canon
Canon PIXMA iP6000D Bedienungsanleitung
Canon
Canon BJC-S200 Bedienungsanleitung
Canon
Canon iPF650 - imagePROGRAF Color Inkjet Printer Bedienungsanleitung
Canon
Canon iP6600D - PIXMA Color Inkjet Printer Bedienungsanleitung
Canon
Canon IPF670 Bedienungsanleitung
Canon
Canon MultiPASS C50 Bedienungsanleitung
Canon
Canon MAXIFY GX3070 Bedienungsanleitung
Canon
Canon imageRUNNER 1435P Bedienungsanleitung
Canon
Canon PowerShot S5 IS Bedienungsanleitung
