Canon i960 Series Bedienungsanleitung
BUBBLE JET PRINTER
Quick Start Guide
Table of Contents
Preface 1
Shipping Materials 1
Introduction 1
Setting Up 2
Preparing the Printer 2
Connecting the Printer to the Computer 2
Installing the Print Head 4
Loading Paper 7
Installing the Printer Driver 8
Aligning the Print Head 12
Basic Operations 16
Printing with Windows 16
Printing with Macintosh 18
Print Head Maintenance 20
Appendix 22
Printing Photographs Directry from a Dicital Camera 21
Notes on Handling the USB Interface (for Windows Users) 22
For Further Details... 22
Printer Accessories 23
QA7-2940-V01 12345678 ©CANON INC.2003 PRINTED IN THAILAND
QA7-2940-V01
BE
The following ink tanks are compatible with this printer.
For details on ink tank replacement, refer to ”Print Head Maintenance” in this guide.
Exif Print
This printer supports Exif 2.2 (also called “Exif Print”).
Exif Print is a standard for enhancing the communication between digital cameras and printers. By
connecting to an Exif Print-compliant digital camera, the camera’s image data at the time of shooting is
used and optimized, yielding extremely high quality prints.
Canadian Radio Interference Regulations
This digital apparatus does not exceed the Class B limits for radio noise emissions from a digital
apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus,”
ICES-003 of the Industry Canada.
Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils
numériques de Classe B prescrites dans la norme sur le matériel brouilleur NMB-003 d'Industrie
Canada intitulée « Appareils numériques ».
International ENERGY STAR®Program
As an ENERGY STAR®Partner, Canon Inc. has determined that this product meets the ENERGY
STAR guidelines for efficiency.
The International ENERGY STAR®Office Equipment Program is a global program
that promotes energy saving through the use of computer and other office equipment.
The program backs the development and dissemination of products with functions
that effectively reduce energy consumption. It is an open system in which business
can participate voluntarily. The targeted products are office equipment such as com-
puters, monitors, printers, faxes and copiers.
Their standards and logos are uniform among participating nations.
Power Requirements
Never use a power supply voltage other than that supplied in the country of purchase. Using the incor-
rect voltage could cause a fire or electric shock. The correct power supply voltages and frequencies are
as follows:
AC 100-127V, 50-60Hz
AC 220-240V, 50-60Hz
Printer Model: K10229 (i960/i965)
1
Preface
Shipping Materials
Thank you for purchasing a Canon Bubble Jet Printer.
Check that all the following items are in the box. If anything is missing or is damaged, contact your Canon
Authorized Dealer or Sales Representative.
Printer
Photo Paper Tray
Setup Software & User’s Guide CD-ROM
Quick Start Guide
Print Head
6 Ink Tanks
* A USB cable should be purchased separately according to your computer. For details on cable
specifications, refer to page 2.
Introduction
This Quick Start Guide uses the following symbols to indicate important information. Always observe the
instructions indicated by these symbols.
Instructions that, if ignored, could result in death or serious personal injury caused by incorrect
operation of the equipment. These must be observed for safe operation.
Instructions that, if ignored, could result in personal injury or material damage caused by incorrect operation
of the equipment. These must be observed for safe operation.
The computer screens in this manual refer to the i965. The operations are exactly the same with the i960.
For information about printing when you connect a PictBridge-compliant digital camera and digital video
camcorder, refer to ”Direct Printing for PictBridge-compliant Digital Cameras”.
Also read the Safety Precautions in the User’s Guide. Observe the warnings and cautions to avoid
personal injury or damage to the printer.
Trademark Notices
• Canon
®
is a registered trademark of Canon Inc.
•BJ
™
is a trademark of Canon Inc.
• Microsoft
®
and Windows
®
are registered trademarks of Microsoft Corporation in the U.S. and other
countries.
• Apple, Mac, Macintosh are trademarks of Apple Computer, Inc., registered in the U.S. and other
countries.
• All other trademarks and registered trademarks appearing in this Quick Start Guide are the property of
their respective owners.
Copyright ©2003 CANON INC.
All rights reserved. No part of this publication may be transmitted or copied in any form whatsoever
without the express written permission.
2
Setting Up
1 Preparing the Printer
1
11
1
Place the printer on a flat surface.
2
22
2
Remove the packing material and tape
from the printer as shown.
The tape position is subject to change.
2 Connecting the Printer to the Computer
Use a USB cable.This printer has two types of USB ports.
• USB 2.0 Hi-Speed port (un upper USB port)
Connect to this port only when you use Windows XP or Windows 2000 and, your computer and
USB cables also support USB 2.0 Hi-Speed. To determine whether your computer supports USB 2.0
Hi-Speed, refer to its manual or contact its manufacturer.
• USB 2.0 Full Speed port (a lower USB port)
Connect to this port when your computer or your cables do not support USB 2.0 Hi-Speed or when it
is not clear whether they support it. Connect to this port when using a Macintosh computer.
USB cable
Recommended
USB 2.0 Hi Speed: Certified USB Hi-Speed cable, up to 3 meters in length.
USB 2.0 Full Speed: Canon or other computer manufacturer cable, up to 5 meters in length.
• Correct operation of USB Hi-Speed 2.0 is not guaranteed under Windows Me, Windows 98, Mac
OS 8.6-9.x or Mac OS X.
• If your computer has an earth connection, make sure that this is attached.
• If you do not intend to use the printer for a long period of time, unplug the power cord from the
power outlet after turning off the printer.
3
Follow the steps below to install the printer driver
correctly.
1
11
1
Ensure the printer and the computer are
switched off.
2
22
2
Connect the cable.
Figure A shows the USB 2.0 Hi-Speed cable connection
and figure B shows the USB 2.0 Full Speed cable
connection.
• Use the USB 2.0 driver supplied by Microsoft.
The driver is available when updating Windows or applying a Windows Service Pack.
Correct operation is not guaranteed with non-Microsoft USB 2.0 deivers.
• If your computer has an earth connection, make sure that this is attached.
Figure A
Figure B
If the Add New Hardware Wizard or Found New Hardware Wizard
screen appears when carrying out the following operations, click
Cancel and turn off the computer.
4
3 Installing the Print Head
• Never attempt to plug the power cord into the power outlet or unplug the power cord when your
hands are wet.
• Never damage, modify, stretch, or excessively bend or twist the power cord. Do not place heavy
objects on the power cord.
• Never use any power supply other than the standard power supply available in the country of
purchase. Using the incorrect voltage and frequency could cause a fire or electric shock.
• Always push the plug all the way into the power outlet.
Installing the Print Head
1
11
1
Plug the printer in.
2
22
2
Turn on the printer. Do NOT turn on the
computer yet.
The POWER lamp flashes and the printer begins to
operate. Wait until the POWER lamp remains fully lit.
3
33
3
Open the front cover.
4
44
4
Remove the tape.
5
55
5
Raise the lock lever.
Do not touch internal parts other than the lock lever.
PC PM
lock lever
5
6
66
6
Remove the protective cap from the
print head.
7
77
7
Place the print head in the holder.
8
88
8
Lock the print head into place by
lowering the lever.
Do not touch the lock lever once the print head has been
installed.
Installing the Ink Tanks
• For safety reasons, store ink tanks out of the reach of small children.
• Do not drop or shake ink tanks as this may cause the ink to leak out and stain your clothes and hands.
1
11
1
Take out the magenta ink tank.
2
22
2
Pull the orange tape in the direction of
the arrow and remove the clear film.
• Do not touch the print
head nozzles or
electrical contacts.
• Do not attempt to
reattach the protective
cap once it has been
removed.
Be careful not to touch any parts inside the printer.
e
l
ectr
i
ca
l
contacts
pr
i
nt
h
ea
d
nozzles
pr
i
nt
h
ea
d
print head holder
6
3
33
3
Hold the ink tank as shown in the
diagram and remove the protective cap.
4
44
4
Insert the magenta ink tank into the
right-hand slot. Press the top until it
clicks into place.
5
55
5
Use the same procedure to install the
other ink tanks in their appropriate slots.
Check the labels to make sure that each tank is in the
correct position.
6
66
6
Close the front cover.
Wait until the POWER lamp remains fully lit (about 60
seconds).
• Do not squeeze the sides of
the ink tanks as this may
cause the ink to leak out and
stain your clothes and hands.
• Do not touch the ink port.
• Do not attempt to reattach the
protective cap once it has
been removed.
• Only install the ink tanks in the positions specified
by the labels.
• If ink tanks are not installed in the right position,
colors will not be printed correctly. Immediately
reinstall the tank in the correct position and carry
out print head cleaning. For details, refer to the
User’s Guide.
protective cap
ink port
PM
Black
(BCI-6BK)
Yellow
(BCI-6Y)
Magenta
(BCI-6M)
Photo Cyan
(BCI-6PC)
Photo Magenta
(BCI-6PM)
Cyan
(BCI-6C)
7
4 Loading Paper
Loading A4 (Letter) Size Plain Paper
1
11
1
Pull out the paper rest and the output
tray completely as shown.
2
22
2
Load the paper, aligning it with the right
side of the sheet feeder.
You can load up to 150 sheets of plain paper (64 gsm).
Do not exceed this limit.
3
33
3
Pinch the paper guide and slide it
against the left side of the stack of
paper.
You now need to install the printer driver:
Windows: Go to page 8
Mac OS X: Go to page 10
output tray
paper rest
print side
8
5 Installing the Printer Driver
Installing the Printer Driver – Windows
1
11
1
Ensure the printer and computer are
switched off.
2
22
2
Turn on the computer and start
Windows. If any applications
automatically run, quit them.
Disable any virus detection programs.
Do NOT turn the printer on at this stage.
• Do not disconnect the cable or remove the CD-ROM during the installation. The driver cannot be
correctly installed.
• The screens below refer to Windows XP installation. Screen may differ depending on the operating
system you are using.
• When installing the printer driver in Windows XP, Windows 2000, log on to the system as a
member of the Administrators group.
If the following screen appears automatically, click
Cancel
and follow steps 1 to 7 to install the printer
driver.
Special Notes for Windows Me or Windows 98 USB Users
Click
Cancel
to quit the screen and turn off the printer. Next, remove and replace the USB cable
connected to your computer.
OFF
Andere Handbücher für i960 Series
6
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Canon Drucker Handbücher
Canon
Canon PIXMA IP5300 Bedienungsanleitung
Canon
Canon iP6700D - PIXMA Color Inkjet Printer Bedienungsanleitung
Canon
Canon Pixma E3100 Series Einrichtungshandbuch
Canon
Canon TS9500 Series Einrichtungshandbuch
Canon
Canon BJ330 - BJ 330 B/W Inkjet Printer Bedienungsanleitung
Canon
Canon BJ-200EX Bedienungsanleitung
Canon
Canon Color Bubble Jet BJC-5000 Series Bedienungsanleitung
Canon
Canon IP2800 series Einrichtungshandbuch
Canon
Canon GX7010 Bedienungsanleitung
Canon
Canon lpb3360 Bedienungsanleitung
Canon
Canon PIXMA TS5020 Bedienungsanleitung
Canon
Canon imagePROGRAF iPF6350 Bedienungsanleitung
Canon
Canon PIXMA GM4000 Series Bedienungsanleitung
Canon
Canon Pixma G1010 Series Bedienungsanleitung
Canon
Canon PIXMA MG4150 Bedienungsanleitung
Canon
Canon imageCLASS LBP162dw Bedienungsanleitung
Canon
Canon imageCLASS MF273dw Bedienungsanleitung
Canon
Canon MP-C635 Bedienungsanleitung
Canon
Canon Pixma LBP 2900 Installationsanleitung
Canon
Canon BJC-S6300 Bedienungsanleitung
