Canon imageClass LBP320 Series Bedienungsanleitung
FT6-2390 (000) XXXXXXXXXX Copyright CANON INC. 2019 PRINTED IN XXXXX
Getting Started
Getting Started
간단 설치 가이드
Quick Operation P.13
Quick Setup NEXT PAGE
https://oip.manual.canon
Please read "Important Safety Instructions" before operating this product. After you finish
reading this guide, store it in a safe place for future reference.
The information in this document is subject to change without notice.
2
Getting Started
Please read "Important Safety Instructions" before operating
this product.
P.18
After you nish reading this guide, store it in a safe place for
future reference.
The information in this document is subject to change
without notice.
간단 설치 가이드
본 제품을 작동하기 전에 "중요 안전 지침"을 읽으십시오.
24페이지의
본 가이드를 다 읽은 후 향후 참조할 수 있도록 안전한
장소에 보관하십시오.
이 문서의 내용은 예고 없이 변경될 수 있습니다.
You can access
https://oip.manual.canon to read the User's Guide that
describes all functions of this machine.
https://oip.manual.canon l에 액세스하여 본 기기의 모든
기능을 설명하는 사용자 안내서를 읽을 수 있습니다.
Quick Setup
Before starting the installation
• Remove all of the tape.
Installation requirements
Provide a space of 100 mm or more around the
machine.
409 mm
433 mm
376 mm
95 mm
390 mm 275 mm 55 mm
130 mm
Paper feeder (optional)
Toner cartridge (included with the machine)
3
Installation of the Machine
Installing the MachineItems Included with the Machine
Quick Setup
4
5
6Up to here
1
2
3
4
Installation of the Machine
Quick Setup
7
8Install the paper feeder (optional).
5
Quick Setup
Back side
6
Installation of the Machine
Quick Setup
Conguring the Method of
Connecting to a Computer
NOTE
Parts and functions of the operation panel.
P.14 "Start the Operation from the Operation
Panel"
1.
2. Configure the initial settings, according to the
screen.
• Set the language and current date/time.
• Set the USB-Connected PC OS.
• Configure the settings to prevent unauthorized
access.
• For the purpose of confirmation, enter the
same PIN twice.
Before starting the configuration
• If the machine is connected to an
unsecured network, your personal
information might be leaked to a third
party. Please be aware and careful of this.
• The machine does not come with a
router. Please have one ready, if necessary.
User's Guide
To connect via wired LAN
The machine does not come with a LAN cable.
Please have one ready, if necessary.
1. Make sure that the computer is connected to a
router properly.
2. Check the network settings on the computer.
3. Connect the LAN cable.
• After connecting the cable, wait a few minutes
(until the IP address is set automatically).
• If a static IP address has been set on the
computer, set the machine's IP address
manually.
4. Install the driver and software.
P.9 "Installing the software"
Now you are finished with the
configuration of the initial settings.
8
Conguring the Machine
Conguring the Initial Settings of
the Machine
Configure the settings in the following order.
Quick Setup
En
To connect via USB
Do not connect the USB cable before installing
the driver. If you did, disconnect the USB cable
from the computer, close the dialog box, and then
perform the following procedure from step 1.
1. Install the driver and software.
P.9 "Installing the software"
Now you are finished with the
configuration of the initial settings.
Installing the software
• The procedure described here is only applicable
when your computer runs on the Windows OS.
For more details on the software installation
procedure, see the driver's manual.
• For the installation when your computer runs on
the macOS, see the driver's manual.
• Your machine may not come with the driver for
the macOS, depending on the time of purchase.
New drivers are uploaded to the Canon website,
and you can download and use the latest one.
1.
2.
If the screen is not displayed properly, re-
insert the CD-ROM/DVD-ROM or search for
"D:\MInst.exe" on the Windows platform (This
description assumes that "D:" is the CD-ROM/
DVD-ROM drive name).
9
Quick Setup
EnEn
컴퓨터 연결 방식 구성
참고
조작 패널의 부품 및 기능.
20페이지 "조작 패널에서 작업 시작"
1.
2.
화면에 따라 초기 설정을 구성합니다.
• 언어와 현재 날짜/시간을 설정합니다.
• USB 연결 PC OS를 설정합니다.
• 무단 액세스 방지 설정을 구성합니다.
• 확인을 위해 PIN 번호를 두 번 입력하
십시오.
구성을 시작하기 전에
•
기기가 비보안 네트워크에 연결될
경우 개인 정보가 타인에게 유출될
수 있습니다. 이 점을 유의하십시오.
• 본 기기에는 라우터가 제공되지 않
습니다. 필요한 경우 라우터를 준비
해두십시오.
사용자 안내서
유선 LAN을 통해 연결하려면
본 기기에는 LAN 케이블이 제공되지 않습니
다. 필요한 경우 LAN 케이블을 준비해 두십
시오.
1.
컴퓨터가 라우터에 올바르게 연결되어 있
는지 확인합니다.
2.
컴퓨터에서 네트워크 설정을 확인합니다.
3.
LAN 케이블을 연결합니다.
• 케이블을 연결한 후 몇 분간 기다립니다
(IP 주소가 자동으로 설정될 때까지).
• 컴퓨터에 고정 IP 주소가 설정되어 있는
경우 기기의 IP 주소를 수동으로 설정하
십시오.
4.
드라이버와 소프트웨어를 설치합니다.
11페이지 "소프트웨어 설치"
이제 초기 설정 구성이 완료되었습니다.
10
기기 구성
기기의 초기 설정 구성
다음 순서로 설정을 구성합니다 .
간편 설치
Ko
Inhaltsverzeichnis
Andere Canon Drucker Handbücher
Canon
Canon G3620 Einrichtungshandbuch
Canon
Canon PIXMA MP630 Bedienungsanleitung
Canon
Canon varioPRINT 110 Technisches Handbuch
Canon
Canon LBP-8iv Bedienungsanleitung
Canon
Canon BJC-S820D Bedienungsanleitung
Canon
Canon PIXMA TR7022 Einrichtungshandbuch
Canon
Canon Arizona 135 GT Bedienungsanleitung
Canon
Canon NP6085 Bedienungsanleitung
Canon
Canon iP4700 - PIXMA Color Inkjet Printer Bedienungsanleitung
Canon
Canon imageRUNNER ADVANCE DX 717 Series Bedienungsanleitung
Canon
Canon PIXMA MG5600 Series Bedienungsanleitung
Canon
Canon PIXMA MX515 Bedienungsanleitung
Canon
Canon imagePRESS C7000VP Series Bedienungsanleitung
Canon
Canon Selphy CP910 Bedienungsanleitung
Canon
Canon iP6600D - PIXMA Color Inkjet Printer Bedienungsanleitung
Canon
Canon Laser Shot LBP-2900 Bedienungsanleitung
Canon
Canon PIXMA MX512 Gebrauchsanweisung
Canon
Canon Pixma G2430 Bedienungsanleitung
Canon
Canon CP-10 Bedienungsanleitung
Canon
Canon PowerShot G1 X Gebrauchsanweisung
