Canon ImagePROGRAF GP-300 Bedienungsanleitung

QT6-4175-V01 XXXXXXXX © CANON INC. 2021 PRINTED IN XXXXXXXX

IMPRIMÉ XX XXXXXXXX

RMC (Regulatory Model Code): K10548

RMC (Regulatory Model Code): K10547

Setup Guide

Read this manual before attempting to operate the printer. Keep this manual for future reference.

Furthermore, in order to ensure that this product is used safely, you should always also read the “Quick Guide” (separate

manual).

ENGLISH

Guide d’installation

Lisez ce manuel avant d’essayer d’utiliser l’imprimante. Conservez ce manuel pour toute consultation ultérieure.

De plus, afin de vous assurer que ce produit est utilisé en toute sécurité, lisez également le “Guide rapide” (manuel

distinct).

FRANÇAIS

Guia de configuração

Leia este manual antes de tentar operar a impressora. Guarde este manual para referência futura.

Além disso, para garantir que este produto seja usado com segurança, leia também o “Guia rápida” (manual separado).

PORTUGUÊS

Guía de configuración

Lea este manual antes de intentar operar la impresora. Conserve este manual a mano para futuras referencias.

Además, para garantizar que este producto se utilice de manera segura, siempre debe leer también la “Guía rápida”

(manual aparte).

ESPAÑOL

Overview of Setup Installation Space

The illustrations in this manual are using the GP-300 as an example for explanation. Note that your printer may look different from these

illustrations in some cases.

Set up the printer using the following procedure. If an error message appears

during setup or other problems occur, refer to "Responding to Messages" on

p. 14.

Removing the Packaging Material Page 4

Assembling the Printer Stand Page 4

Installing the Printer Page 4

Turning On the Printer Page 5

Installing the Ink Tanks Page 6

Installing the Print Head Page 8

Performing Print Head Adjustment Page 10

Selecting the Method of Connecting

to Your Computer Page 11

Installing the Software on Your

Computer Page 12

Loading Paper Page 13

About the Cleaning Brush Page 13

Printing From a Smartphone or Tablet Page 13

Displaying the Online Manual Page 13

Sending Information To Canon Page 13

Trademarks Page 13

Responding to Messages Page 14

When installing the printer, it is recommended that you secure the following

space around the printer.

Important

●The printer stand may not be included with the model you purchased.

Please note that the required space differs depending on whether the

options are used or not.

●The space required in front of the printer varies depending on how the

basket is used.

■GP-300

Required space* (W x D x H)

66.5 × 57.9 × 53.6 inches

1,689 × 1,470 × 1,360 mm

7.9 inches

(200 mm)

23.6 inches

(600 mm)*

7.9 inches

(200 mm)

11.8 inches (300 mm)

* When using the SD-33 printer stand

■GP-200

Required space* (W x D x H)

54.5 × 57.9 × 53.6 inches

1,382 × 1,470 × 1,360 mm

Required space** (W x D x H)

54.5 × 53.5 × 29.1 inches

1,382 × 1,358 × 739 mm

7.9 inches

(200 mm)

0.39 inches

(10 mm)**

7.9 inches

(200 mm)

11.8 inches (300 mm)

23.6 inches

(600 mm)*

23.6 inches

(600 mm)**

* When using the SD-24 printer stand

** When not using the printer stand

ENGLISH

Package Contents

Check that the following included accessories are contained in the package. Note that a cable to connect the printer to a computer is not provided with the

printer.

Note

●Some of the included accessories are not described in this manual. Store them along with the other accessories as they are required for other functions.

●For instructions on the included items not described in this manual, refer to the Online Manual by following the instructions in "Displaying the Online Manual"

on p. 13.

aPrinter

bRoll holder (Already mounted on printer)

cHolder stopper *1

d3-inch paper core attachment (2 pieces)

ePrint head

fInk tanks (6 pieces)

gPaper for adjustment

hSetup Guide (this manual)

iSet of printer documentation

jSet of CD-ROMs

kPower cord

lStand set *2

*1 This is used when loading roll paper. For details, refer to the Online Manual.

*2 Only included with models where the printer stand is included as standard.

Note that it may be packaged in a separate box depending on the region

where you purchased the printer.

The items included with the printer stand are described in the Printer Stand

Setup Guide.

Manuals Included with This Printer

Setup Guide (this manual)

Describes how to setup the printer.

Printer Stand Setup Guide

Describes how to assemble the stand. This item might not be included depending on your model.

Quick Guide

Contains information related to warnings for using this printer safely and information related to replacing paper, ink tanks, and the print head.

Online Manual (Electronic Manuals)

This manual describes advanced usage of the printer such as paper saving tips, how to print a poster and banner with the supplied software and print quality

adjusting method, in addition to the basic instructions for printing on roll paper or cut sheet. To view the Online Manual, refer to "Displaying the Online Manual"

(p. 13).

Handling Cautions

Moving the Printer

●Have the following number of people grasp each side and the rear of the

printer. The weight may cause pain such as back pain.

GP-300 (Approx. 108 lb (49 kg)) 3 people or more

GP-200 (Approx. 91 lb (41 kg)) 3 people or more

For the GP-300

●Firmly grasp the carrying grips (A) on each side of the base and the rear of

the printer. Holding the printer at other positions is dangerous and cause

injury and damage if the printer is dropped.

Other

●Do not put the printer down or carry the printer with only the center of

the printer supported. This may cause damage to the printer.

●When setting the printer down temporarily, make sure to put the printer

on a flat, stable surface.

Installing the Printer

If you are not using the stand, install the printer in a location like the following.

Assembling the Printer Stand

Assemble the stand by referring to the Printer Stand Setup Guide (separate manual). If you are

not using the stand, proceed to "

Installing the Printer".

Removing the Packaging Material

Lift up the printer.

●For details on how to carry and the number of people, refer to

"Handling Cautions" (p. 3).

Place the printer on a stable flat location.

Remove the packaging material.

Remove all of the tape and other packaging material.

Remove the tape affixed to the roll holder.

Turning On the Printer

Connect the power cord to the printer.

●Insert the power cord into the power connector on the side of

the printer.

Turn on the printer.

When the language selection screen appears on the

touch screen, select and gently tap a language with

your finger. Then, if the screen for selecting a time zone

appears, select and tap your region.

Tap Next.

●Perform the remaining operations by following the instructions

on the screen. In the middle of these operations, there is a

choice about sending information. Read “Sending Information

To Canon” (P.13).

When a message prompting you to start the setup

appears on the touch screen, tap OK.

Installing the Ink Tanks

Instructions on ink tank installation are shown on the touch screen. Install the ink tanks as instructed. If the ink tank is cold, allow it to adjust to room temperature

before attaching it to the printer.

Open the ink tank covers by grasping the handles.

While pushing the tip of the ink tank lock lever

horizontally, open the ink tank lock lever upwards.

Shake each ink tank gently 1 or 2 times before opening its pouch.

Important

●Failure to shake the ink tanks may result in reduced print quality because ink ingredients have settled on the

bottom of the tank.

Open the pouch and remove the ink tank.

Important

●Never touch the ink outlets or metal contacts (the area shown shaded in the diagram).

Touching these parts may cause stains, damage the ink tank, and affect print quality.

●Avoid dropping the ink tank after removing it from the pouch.

Otherwise, ink may leak and cause stains.

●Do not remove ink tanks to shake them after they have been mounted.

Doing so may cause ink to spill.

Check that the color of the ink tank is the same as the color displayed on the label in the printer, and insert the ink tank into

the holder in the orientation shown in the diagram.

●Insert with the ink tank label facing up and ensuring that the text on the label is not upside-down.

Match the color of the ink tank

label to the color of the label

in the printer

Close the ink tank lock lever until it clicks.

Important

●Take particular care with the BK

and MBK ink tanks that are easy

to confuse.

Repeat steps 2 to 6 to install each of the ink tanks.

Close the ink tank cover.

Check that the color of the ink tank that was set is

displayed on the touch screen, and tap OK.

Important

●If the touch screen does not show the color, repeat steps 2 and

Installing the Print Head

Instructions are now shown on the touch screen regarding print head installation. Install the print head by following the instructions.

Open the top cover.

Important

●Do not move the carriage (the area enclosed by a circle in the

diagram). If you accidentally move it, temporarily close the top

cover and it will return to its original position.

Tilt the print head lock lever towards you.

Open the print head locking cover and tap OK on the

touch screen. At this time, check that there is no dirt on

the electrical contacts of the carriage.

Contacts on the carriage

Grasp the print head as shown in the diagram and

remove it from the bag.

Hold here

Remove the orange protective caps in the order shown in

the diagram.

Hold here to

remove

Important

●Do not touch the part that was being

protected by the protective cap (part

shown shaded in the diagram) under any

circumstances. Touching it may cause

damage to the print head or printing

problems.

●The print head is filled with ink. Be careful to

avoid getting your clothes and surrounding

items dirty when removing the protective

caps. It is recommended that you remove

the protective caps above the bag that

contained the print head.

●Do not reattach the protective caps after

removing them. Furthermore, dispose of

them according to local regulations.

Install the print head.

●Align the print head so that the area enclosed by a circle in the

diagram is facing you, and carefully push the print head firmly

into the printer, ensuring that the part covered by the protective

caps does not touch the carriage.

Pull the print head locking cover down toward you to lock

the print head in place.

Push the print head lock lever all the way to the end.

Check that the triangle mark on the angle adjustment

lever is aligned with the red ■. If they are not aligned,

move the angle adjustment lever up or down to align it

with the ■.

Triangle mark

Red ■

Close the top cover.

Andere Handbücher für imagePROGRAF GP-300

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Canon Drucker Handbücher

Canon

Canon DS810 - SELPHY Color Inkjet Printer Bedienungsanleitung

Canon

Canon LASER SHOT LBP9100Cdn Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE DX C357iF Bedienungsanleitung

Canon

Canon PIXMA MP470 Bedienungsanleitung

Canon

Canon MultiPASS F60 Handbuch

Canon

Canon PIXMA MX420 Series Handbuch

Canon

Canon MG3600 series Bedienungsanleitung

Canon

Canon IMAGECLASS LBP654CDW Bedienungsanleitung

Canon

Canon LBP-1000 Bedienungsanleitung

Canon

Canon imageRUNNER 2545i Montage- und Bedienungsanleitung

Canon

Canon Laser Shot LBP-2900 Bedienungsanleitung

Canon

Canon LBP7780CX Bedienungsanleitung

Canon

Canon imageCLASS D1320 Sicherheitsleitfaden

Canon

Canon MP370 Bedienungsanleitung

Canon

Canon iP90 - PIXMA Color Inkjet Printer Installationshandbuch

Canon

Canon Pixma iP1600 Pixma iP1200 Bedienungsanleitung

Canon

Canon i470D Series Bedienungsanleitung

Canon

Canon imageRUNNER ADVANCE 8500 Series Bedienungsanleitung

Canon

Canon MG3600 series Bedienungsanleitung

Canon

Canon TR4700 Series Einrichtungshandbuch

Canon

Canon PIXMA MP270 Bedienungsanleitung

Canon

Canon C5500 Series Bedienungsanleitung

Canon

Canon PIXMA G2410 Series Bedienungsanleitung

Canon

Canon Pixma iP5200 Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Lexmark

Lexmark 1400 Series Handbuch

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Samsung

Samsung BIXOLON SRP-350plusF Bedienungsanleitung

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Epson

Epson ET-7750 Betriebsanleitung

Eltron

Eltron P210 Guide Bedienungsanleitung

Ricoh

Ricoh MD-P1 Bedienungsanleitung

Epson

Epson SC-F7100 series Bedienungsanleitung

Epson

Epson Stylus C40UX Bedienungsanleitung

IRA3D

IRA3D POETRY4 Bedienungsanleitung

Ricoh

Ricoh Aficio AP400 Bedienungsanleitung

BIXOLON

BIXOLON SRP-352plusV Bedienungsanleitung

Epson

Epson Stylus Photo PX700W Montageanleitung

Ricoh

Ricoh SP204SF Bedienungsanleitung

Star Micronics

Star Micronics futurePRNT TSP100 Bedienungsanleitung

Epson

Epson TM-TM88V-i Gebrauchs- und Pflegehandbuch

Canon imagePROGRAF GP-300 Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken